Angular Momentum at Outlet Solution

STEP 0: Pre-Calculation Summary
Formula Used
Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel
L = ((wf*v)/ G)*r
This formula uses 5 Variables
Variables Used
Angular Momentum - (Measured in Kilogram Square Meter per Second) - Angular Momentum is the degree to which a body rotates, gives its angular momentum.
Weight of Fluid - (Measured in Newton) - Weight of Fluid is the weight of fluid in Newtons or Kilo newton.
Velocity of Jet - (Measured in Meter per Second) - Velocity of Jet can be described as the movement of the plate in meters per second.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Radius of wheel - (Measured in Meter) - Radius of wheel is a radial line from the focus to any point of a curve.
STEP 1: Convert Input(s) to Base Unit
Weight of Fluid: 12.36 Newton --> 12.36 Newton No Conversion Required
Velocity of Jet: 9.69 Meter per Second --> 9.69 Meter per Second No Conversion Required
Specific Gravity of Fluid: 10 --> No Conversion Required
Radius of wheel: 3 Meter --> 3 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
L = ((wf*v)/ G)*r --> ((12.36*9.69)/ 10)*3
Evaluating ... ...
L = 35.93052
STEP 3: Convert Result to Output's Unit
35.93052 Kilogram Square Meter per Second --> No Conversion Required
FINAL ANSWER
35.93052 Kilogram Square Meter per Second <-- Angular Momentum
(Calculation completed in 00.004 seconds)

Credits

Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verified by Rithik Agrawal
National Institute of Technology Karnataka (NITK), Surathkal
Rithik Agrawal has verified this Calculator and 400+ more calculators!

21 Torque Exerted on a Wheel with Radial Curved Vanes Calculators

Radius at Inlet for Work Done on Wheel per Second
Go Radius of wheel = (((Work Done*Specific Gravity of Fluid)/ (Weight of Fluid*Angular Velocity))-(Velocity of Jet*Radius of Outlet))/Final Velocity
Radius at Outlet for Work Done on Wheel per Second
Go Radius of Outlet = (((Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Angular Velocity))-(Final Velocity*Radius of wheel))/Velocity of Jet
Angular Velocity for Work Done on Wheel per Second
Go Angular Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*(Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet))
Radius at Outlet for Torque Exerted by Fluid
Go Radius of Outlet = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)-(Final Velocity*Radius of wheel))/Velocity of Jet
Radius at Inlet with Known Torque by Fluid
Go Radius of wheel = (((Torque Exerted on Wheel*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Radius of Outlet))/Final Velocity
Torque Exerted by Fluid
Go Torque Exerted on Wheel = (Weight of Fluid/Specific Gravity of Fluid)*(Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet)
Initial Velocity for Work Done if Jet leaves in Motion of Wheel
Go Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/Weight of Fluid)+(Velocity of Jet*Final Velocity))/Final Velocity
Power Delivered to Wheel
Go Power Delivered = (Weight of Fluid/Specific Gravity of Fluid)*(Final Velocity*Initial Velocity+Velocity of Jet*Final Velocity)
Initial Velocity given Power Delivered to Wheel
Go Initial Velocity = (((Power Delivered*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity))-(Velocity of Jet))
Velocity for Work Done if there is no Loss of Energy
Go Final Velocity = sqrt(((Work Done*2*Specific Gravity of Fluid)/Weight of Fluid)+Velocity of Jet^2)
Angular Momentum at Outlet
Go Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel
Velocity given Angular Momentum at Outlet
Go Velocity of Jet = (Tangential Momentum*Specific Gravity of Fluid)/(Weight of Fluid*Radius of wheel)
Velocity given Angular Momentum at Inlet
Go Final Velocity = (Angular Momentum*Specific Gravity of Fluid)/(Weight of Fluid*Radius of wheel)
Angular Momentum at Inlet
Go Angular Momentum = ((Weight of Fluid*Final Velocity)/Specific Gravity of Fluid)*Radius of wheel
Initial Velocity when Work Done at Vane Angle is 90 and Velocity is Zero
Go Initial Velocity = (Work Done*Specific Gravity of Fluid)/(Weight of Fluid*Final Velocity)
Speed of Wheel given Tangential Velocity at Outlet Tip of Vane
Go Angular Speed = (Tangential Velocity*60)/(2*pi*Radius of Outlet)
Speed of Wheel given Tangential Velocity at Inlet Tip of Vane
Go Angular Speed = (Tangential Velocity*60)/(2*pi*Radius of wheel)
Velocity at Point given Efficiency of System
Go Velocity of Jet = sqrt(1-Efficiency of Jet)*Final Velocity
Velocity given Efficiency of System
Go Final Velocity = Velocity of Jet/sqrt(1-Efficiency of Jet)
Efficiency of System
Go Efficiency of Jet = (1-(Velocity of Jet/Final Velocity)^2)
Mass of Fluid Striking Vane per Second
Go Fluid Mass = Weight of Fluid/Specific Gravity of Fluid

Angular Momentum at Outlet Formula

Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel
L = ((wf*v)/ G)*r

What is Angular Momentum?

The perpendicular distance between the force of action's line and the point of rotation, while torque is calculated as the turning force of an object.

How to Calculate Angular Momentum at Outlet?

Angular Momentum at Outlet calculator uses Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel to calculate the Angular Momentum, The Angular Momentum at Outletis the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction. Angular Momentum is denoted by L symbol.

How to calculate Angular Momentum at Outlet using this online calculator? To use this online calculator for Angular Momentum at Outlet, enter Weight of Fluid (wf), Velocity of Jet (v), Specific Gravity of Fluid (G) & Radius of wheel (r) and hit the calculate button. Here is how the Angular Momentum at Outlet calculation can be explained with given input values -> 35.93052 = ((12.36*9.69)/ 10)*3.

FAQ

What is Angular Momentum at Outlet?
The Angular Momentum at Outletis the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction and is represented as L = ((wf*v)/ G)*r or Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel. Weight of Fluid is the weight of fluid in Newtons or Kilo newton, Velocity of Jet can be described as the movement of the plate in meters per second, Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid & Radius of wheel is a radial line from the focus to any point of a curve.
How to calculate Angular Momentum at Outlet?
The Angular Momentum at Outletis the product of the mass and velocity of an object. It is a vector quantity, possessing a magnitude and a direction is calculated using Angular Momentum = ((Weight of Fluid*Velocity of Jet)/ Specific Gravity of Fluid)*Radius of wheel. To calculate Angular Momentum at Outlet, you need Weight of Fluid (wf), Velocity of Jet (v), Specific Gravity of Fluid (G) & Radius of wheel (r). With our tool, you need to enter the respective value for Weight of Fluid, Velocity of Jet, Specific Gravity of Fluid & Radius of wheel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Angular Momentum?
In this formula, Angular Momentum uses Weight of Fluid, Velocity of Jet, Specific Gravity of Fluid & Radius of wheel. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Angular Momentum = ((Weight of Fluid*Final Velocity)/Specific Gravity of Fluid)*Radius of wheel
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!