Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet Calculator

✖Force by Stationary Plate on Jet ⊥ Plate is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.ⓘ Force by Stationary Plate on Jet ⊥ Plate [F_St,⊥p]			+10% -10%
✖Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.ⓘ Specific Weight of Liquid [γ_f]			+10% -10%
✖Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.ⓘ Fluid Jet Velocity [v_jet]			+10% -10%

✖Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.ⓘ Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet [A_Jet]

⎘ Copy

👎

Formula

✖

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet

Formula

`"A"_{"Jet"} = ("F"_{"St,⊥p"}*"[g]")/("γ"_{"f"}*"v"_{"jet"}^2)`

Example

`"1.200979m²"=("173N"*"[g]")/("9.81kN/m³"*("12m/s")^2)`

Calculator

LaTeX

Reset

👍

Download Force Exerted by Fluid Jet on Stationary Flat Plate Formulas PDF PDF Image

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet Solution

STEP 0: Pre-Calculation Summary

Formula Used

Cross Sectional Area of Jet = (Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2)
A_Jet = (F_St,⊥p*[g])/(γ_f*v_jet^2)
This formula uses 1 Constants, 4 Variables

Constants Used

[g] - Gravitational acceleration on Earth Value Taken As 9.80665

Variables Used

Cross Sectional Area of Jet - (Measured in Square Meter) - Cross Sectional Area of Jet is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Force by Stationary Plate on Jet ⊥ Plate - (Measured in Newton) - Force by Stationary Plate on Jet ⊥ Plate is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity.
Specific Weight of Liquid - (Measured in Kilonewton per Cubic Meter) - Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid.
Fluid Jet Velocity - (Measured in Meter per Second) - Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.

STEP 1: Convert Input(s) to Base Unit

Force by Stationary Plate on Jet ⊥ Plate: 173 Newton --> 173 Newton No Conversion Required
Specific Weight of Liquid: 9.81 Kilonewton per Cubic Meter --> 9.81 Kilonewton per Cubic Meter No Conversion Required
Fluid Jet Velocity: 12 Meter per Second --> 12 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

A_Jet = (F_St,⊥p*[g])/(γ_f*v_jet^2) --> (173*[g])/(9.81*12^2)

Evaluating ... ...

A_Jet = 1.20097862866689

STEP 3: Convert Result to Output's Unit

1.20097862866689 Square Meter --> No Conversion Required

FINAL ANSWER

1.20097862866689 ≈ 1.200979 Square Meter <-- Cross Sectional Area of Jet

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Impact of Free Jets » Force Exerted by Fluid Jet on Stationary Flat Plate » Flat Plate Normal to the Jet » Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 6 Flat Plate Normal to the Jet Calculators

Velocity for Force Exerted by Stationary Plate on Jet

Go Fluid Jet Velocity = sqrt((Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Cross Sectional Area of Jet))

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet

Go Cross Sectional Area of Jet = (Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2)

Force Exerted by Stationary Plate on Jet

Go Force by Stationary Plate on Jet ⊥ Plate = (Specific Weight of Liquid*Cross Sectional Area of Jet*(Fluid Jet Velocity^2))/[g]

Area of Cross Section of Jet given Mass of Fluid

Go Cross Sectional Area of Jet = (Mass Flow Rate of Jet*[g])/(Specific Weight of Liquid*Fluid Jet Velocity)

Velocity given Mass of Fluid

Go Fluid Jet Velocity = (Mass Flow Rate of Jet*[g])/(Specific Weight of Liquid*Cross Sectional Area of Jet)

Mass Flow Rate of Fluid Striking Plate

Go Mass Flow Rate of Jet = (Specific Weight of Liquid*Cross Sectional Area of Jet*Fluid Jet Velocity)/[g]

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet Formula

Cross Sectional Area of Jet = (Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2)
A_Jet = (F_St,⊥p*[g])/(γ_f*v_jet^2)

What is meant by Area of Cross Section?

The Area of Cross Section of Jet for force exerted by stationary Plate on jet is the area of a two-dimensional shape that is obtained when a three-dimensional object - such as a cylinder.

How to Calculate Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet?

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet calculator uses Cross Sectional Area of Jet = (Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2) to calculate the Cross Sectional Area of Jet, Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet is the area of a two-dimensional shape that is obtained when a three-dimensional object - such as a cylinder. Cross Sectional Area of Jet is denoted by A_Jet symbol.

How to calculate Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet using this online calculator? To use this online calculator for Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet, enter Force by Stationary Plate on Jet ⊥ Plate (F_St,⊥p), Specific Weight of Liquid (γ_f) & Fluid Jet Velocity (v_jet) and hit the calculate button. Here is how the Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet calculation can be explained with given input values -> 0.001201 = (173*[g])/(9810*12^2).

FAQ

What is Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet?

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet is the area of a two-dimensional shape that is obtained when a three-dimensional object - such as a cylinder and is represented as A_Jet = (F_St,⊥p*[g])/(γ_f*v_jet^2) or Cross Sectional Area of Jet = (Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2). Force by Stationary Plate on Jet ⊥ Plate is any interaction that, when unopposed, will change the motion of an object. In other words, a force can cause an object with mass to change its velocity, Specific Weight of Liquid represents the force exerted by gravity on a unit volume of a fluid & Fluid Jet Velocity is the volume of fluid flowing in the given vessel per unit cross sectional area.

How to calculate Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet?

Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet is the area of a two-dimensional shape that is obtained when a three-dimensional object - such as a cylinder is calculated using Cross Sectional Area of Jet = (Force by Stationary Plate on Jet ⊥ Plate*[g])/(Specific Weight of Liquid*Fluid Jet Velocity^2). To calculate Area of Cross Section of Jet for Force Exerted by Stationary Plate on Jet, you need Force by Stationary Plate on Jet ⊥ Plate (F_St,⊥p), Specific Weight of Liquid (γ_f) & Fluid Jet Velocity (v_jet). With our tool, you need to enter the respective value for Force by Stationary Plate on Jet ⊥ Plate, Specific Weight of Liquid & Fluid Jet Velocity and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Cross Sectional Area of Jet?

In this formula, Cross Sectional Area of Jet uses Force by Stationary Plate on Jet ⊥ Plate, Specific Weight of Liquid & Fluid Jet Velocity. We can use 1 other way(s) to calculate the same, which is/are as follows -

Cross Sectional Area of Jet = (Mass Flow Rate of Jet*[g])/(Specific Weight of Liquid*Fluid Jet Velocity)

Home

FREE PDFs

🔍 Search