Coefficient of Discharge given Area for Siphon Throat Calculator

✖Volume Flow Rate is the volume of fluid that passes per unit of time.ⓘ Volume Flow Rate [Q]			+10% -10%
✖Area for Siphon Throat is the area of the siphon from where the discharge is released.ⓘ Area for Siphon Throat [A_s]			+10% -10%
✖Acceleration due to Gravity is acceleration gained by an object because of gravitational force.ⓘ Acceleration due to Gravity [g]			+10% -10%
✖The Head of Liquid is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column from the base of its container.ⓘ Head of Liquid [H]			+10% -10%

✖The Coefficient of Discharge or efflux coefficient is the ratio of the actual discharge to the theoretical discharge.ⓘ Coefficient of Discharge given Area for Siphon Throat [C_d]

⎘ Copy

👎

Formula

✖

Coefficient of Discharge given Area for Siphon Throat

Formula

`"C"_{"d"} = "Q"/("A"_{"s"}*(2*"g"*"H")^(1/2))`

Example

`"0.729015"="1.5m³/s"/("0.12m²"*(2*"9.8m/s²"*"15m")^(1/2))`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF

Coefficient of Discharge given Area for Siphon Throat Solution

STEP 0: Pre-Calculation Summary

Formula Used

Coefficient of Discharge = Volume Flow Rate/(Area for Siphon Throat*(2*Acceleration due to Gravity*Head of Liquid)^(1/2))
C_d = Q/(A_s*(2*g*H)^(1/2))
This formula uses 5 Variables

Variables Used

Coefficient of Discharge - The Coefficient of Discharge or efflux coefficient is the ratio of the actual discharge to the theoretical discharge.
Volume Flow Rate - (Measured in Cubic Meter per Second) - Volume Flow Rate is the volume of fluid that passes per unit of time.
Area for Siphon Throat - (Measured in Square Meter) - Area for Siphon Throat is the area of the siphon from where the discharge is released.
Acceleration due to Gravity - (Measured in Meter per Square Second) - Acceleration due to Gravity is acceleration gained by an object because of gravitational force.
Head of Liquid - (Measured in Meter) - The Head of Liquid is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column from the base of its container.

STEP 1: Convert Input(s) to Base Unit

Volume Flow Rate: 1.5 Cubic Meter per Second --> 1.5 Cubic Meter per Second No Conversion Required
Area for Siphon Throat: 0.12 Square Meter --> 0.12 Square Meter No Conversion Required
Acceleration due to Gravity: 9.8 Meter per Square Second --> 9.8 Meter per Square Second No Conversion Required
Head of Liquid: 15 Meter --> 15 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

C_d = Q/(A_s*(2*g*H)^(1/2)) --> 1.5/(0.12*(2*9.8*15)^(1/2))

Evaluating ... ...

C_d = 0.729014804399755

STEP 3: Convert Result to Output's Unit

0.729014804399755 --> No Conversion Required

FINAL ANSWER

0.729014804399755 ≈ 0.729015 <-- Coefficient of Discharge

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Flow velocity in straight sewers » Controlling Sewer-Water Flow » Coefficient of Discharge given Area for Siphon Throat

Credits

Created by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has created this Calculator and 500+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 7 Controlling Sewer-Water Flow Calculators

Head given Area for Siphon Throat

Go Head of Liquid = (Volume Flow Rate/(Area for Siphon Throat*Coefficient of Discharge))^(2)*(1/(2*Acceleration due to Gravity))

Coefficient of Discharge given Area for Siphon Throat

Go Coefficient of Discharge = Volume Flow Rate/(Area for Siphon Throat*(2*Acceleration due to Gravity*Head of Liquid)^(1/2))

Area for Siphon Throat

Go Area for Siphon Throat = Volume Flow Rate/(Coefficient of Discharge*(2*Acceleration due to Gravity*Head of Liquid)^(1/2))

Discharge given Area for Siphon Throat

Go Volume Flow Rate = Area for Siphon Throat*Coefficient of Discharge*(2*Acceleration due to Gravity*Head of Liquid)^(1/2)

Depth of Flow over Weir given Flow Diversion

Go Depth of Flow Over Weir = (Volume Flow Rate/(3.32*(Length of Weir)^0.83))^(1/1.67)

Length of Weir given Flow Diversion

Go Length of Weir = (Volume Flow Rate/(3.32*Depth of Flow Over Weir^1.67))^(1/0.83)

Flow Diversion for Side Weir

Go Volume Flow Rate = 3.32*Length of Weir^(0.83)*Depth of Flow Over Weir^(1.67)

Coefficient of Discharge given Area for Siphon Throat Formula

Coefficient of Discharge = Volume Flow Rate/(Area for Siphon Throat*(2*Acceleration due to Gravity*Head of Liquid)^(1/2))
C_d = Q/(A_s*(2*g*H)^(1/2))

What is siphon?

A siphon is any of a wide variety of devices that involve the flow of liquids through tubes. Pipelines called inverted siphons are used to carry sewage or stormwater under streams, highway cuts, or other depressions in the ground.

How to Calculate Coefficient of Discharge given Area for Siphon Throat?

Coefficient of Discharge given Area for Siphon Throat calculator uses Coefficient of Discharge = Volume Flow Rate/(Area for Siphon Throat*(2*Acceleration due to Gravity*Head of Liquid)^(1/2)) to calculate the Coefficient of Discharge, The Coefficient of Discharge given Area for Siphon Throat formula is defined as the ratio of actual discharge to theoretical discharge. It varies from0.6 to 0.8. Coefficient of Discharge is denoted by C_d symbol.

How to calculate Coefficient of Discharge given Area for Siphon Throat using this online calculator? To use this online calculator for Coefficient of Discharge given Area for Siphon Throat, enter Volume Flow Rate (Q), Area for Siphon Throat (A_s), Acceleration due to Gravity (g) & Head of Liquid (H) and hit the calculate button. Here is how the Coefficient of Discharge given Area for Siphon Throat calculation can be explained with given input values -> 0.729015 = 1.5/(0.12*(2*9.8*15)^(1/2)).

FAQ

What is Coefficient of Discharge given Area for Siphon Throat?

The Coefficient of Discharge given Area for Siphon Throat formula is defined as the ratio of actual discharge to theoretical discharge. It varies from0.6 to 0.8 and is represented as C_d = Q/(A_s*(2*g*H)^(1/2)) or Coefficient of Discharge = Volume Flow Rate/(Area for Siphon Throat*(2*Acceleration due to Gravity*Head of Liquid)^(1/2)). Volume Flow Rate is the volume of fluid that passes per unit of time, Area for Siphon Throat is the area of the siphon from where the discharge is released, Acceleration due to Gravity is acceleration gained by an object because of gravitational force & The Head of Liquid is the height of a liquid column that corresponds to a particular pressure exerted by the liquid column from the base of its container.

How to calculate Coefficient of Discharge given Area for Siphon Throat?

The Coefficient of Discharge given Area for Siphon Throat formula is defined as the ratio of actual discharge to theoretical discharge. It varies from0.6 to 0.8 is calculated using Coefficient of Discharge = Volume Flow Rate/(Area for Siphon Throat*(2*Acceleration due to Gravity*Head of Liquid)^(1/2)). To calculate Coefficient of Discharge given Area for Siphon Throat, you need Volume Flow Rate (Q), Area for Siphon Throat (A_s), Acceleration due to Gravity (g) & Head of Liquid (H). With our tool, you need to enter the respective value for Volume Flow Rate, Area for Siphon Throat, Acceleration due to Gravity & Head of Liquid and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search