Density of Electrolyte from Heat Absorbed Electrolyte Calculator

✖Heat Absorption of Electrolyte is the Heat absorbed by the electrolyte.ⓘ Heat Absorption of Electrolyte [H_e]			+10% -10%
✖Volume Flow Rate is the volume of fluid that passes per unit of time.ⓘ Volume Flow Rate [q]			+10% -10%
✖Specific Heat Capacity of electrolyte is the heat required to raise the temperature of the unit mass of a given substance by a given amount.ⓘ Specific Heat Capacity of Electrolyte [c_e]			+10% -10%
✖Boiling Point of electrolyte is the temperature at which a liquid starts to boil and transforms to vapor.ⓘ Boiling Point of Electrolyte [θ_B]			+10% -10%
✖Ambient Air Temperature is the temperature where the ramming process starts.ⓘ Ambient Air Temperature [θ_o]			+10% -10%

✖The Density of Electrolyte shows the denseness of that electrolyte in a specific given area. This is taken as mass per unit volume of a given object.ⓘ Density of Electrolyte from Heat Absorbed Electrolyte [ρ_e]

⎘ Copy

👎

Formula

✖

Density of Electrolyte from Heat Absorbed Electrolyte

Formula

`"ρ"_{"e"} = "H"_{"e"}/("q"*"c"_{"e"}*("θ"_{"B"}-"θ"_{"o"}))`

Example

`"997.0001kg/m³"="12kW"/("47990.86mm³/s"*"4.18kJ/kg*K"*("368.15K"-"308.15K"))`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Density of Electrolyte from Heat Absorbed Electrolyte Solution

STEP 0: Pre-Calculation Summary

Formula Used

Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))
ρ_e = H_e/(q*c_e*(θ_B-θ_o))
This formula uses 6 Variables

Variables Used

Density of Electrolyte - (Measured in Kilogram per Cubic Meter) - The Density of Electrolyte shows the denseness of that electrolyte in a specific given area. This is taken as mass per unit volume of a given object.
Heat Absorption of Electrolyte - (Measured in Watt) - Heat Absorption of Electrolyte is the Heat absorbed by the electrolyte.
Volume Flow Rate - (Measured in Cubic Meter per Second) - Volume Flow Rate is the volume of fluid that passes per unit of time.
Specific Heat Capacity of Electrolyte - (Measured in Joule per Kilogram per K) - Specific Heat Capacity of electrolyte is the heat required to raise the temperature of the unit mass of a given substance by a given amount.
Boiling Point of Electrolyte - (Measured in Kelvin) - Boiling Point of electrolyte is the temperature at which a liquid starts to boil and transforms to vapor.
Ambient Air Temperature - (Measured in Kelvin) - Ambient Air Temperature is the temperature where the ramming process starts.

STEP 1: Convert Input(s) to Base Unit

Heat Absorption of Electrolyte: 12 Kilowatt --> 12000 Watt (Check conversion here)
Volume Flow Rate: 47990.86 Cubic Millimeter per Second --> 4.799086E-05 Cubic Meter per Second (Check conversion here)
Specific Heat Capacity of Electrolyte: 4.18 Kilojoule per Kilogram per K --> 4180 Joule per Kilogram per K (Check conversion here)
Boiling Point of Electrolyte: 368.15 Kelvin --> 368.15 Kelvin No Conversion Required
Ambient Air Temperature: 308.15 Kelvin --> 308.15 Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

ρ_e = H_e/(q*c_e*(θ_B-θ_o)) --> 12000/(4.799086E-05*4180*(368.15-308.15))

Evaluating ... ...

ρ_e = 997.000052763237

STEP 3: Convert Result to Output's Unit

997.000052763237 Kilogram per Cubic Meter --> No Conversion Required

FINAL ANSWER

997.000052763237 ≈ 997.0001 Kilogram per Cubic Meter <-- Density of Electrolyte

(Calculation completed in 00.035 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Electrochemical Machining » Heat in Electrolyte » Density of Electrolyte from Heat Absorbed Electrolyte

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has verified this Calculator and 200+ more calculators!

< 10+ Heat in Electrolyte Calculators

Ambient Temperature during ECM

Go Ambient Air Temperature = Boiling Point of Electrolyte-(Electric Current^2*Resistance of Gap Between Work and Tool)/(Density of Electrolyte*Specific Heat Capacity of Electrolyte*Maximum Volume Flow Rate)

Specific Heat of Electrolyte from Volume Flow Rate

Go Specific Heat Capacity of Electrolyte = (Electric Current^2*Resistance of Gap Between Work and Tool)/(Density of Electrolyte*Volume Flow Rate*(Boiling Point of Electrolyte-Ambient Air Temperature))

Boiling Point of Electrolyte during Electrochemical Machining of Metals

Go Boiling Point of Electrolyte = Ambient Air Temperature+(Electric Current^2*Resistance of Gap Between Work and Tool)/(Density of Electrolyte*Specific Heat Capacity of Electrolyte*Volume Flow Rate)

Ambient Temperature

Go Ambient Air Temperature = Boiling Point of Electrolyte-Heat Absorption of Electrolyte/(Maximum Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte)

Flow Rate of Electrolyte from Heat Absorbed Electrolyte

Go Volume Flow Rate = Heat Absorption of Electrolyte/(Density of Electrolyte*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))

Density of Electrolyte from Heat Absorbed Electrolyte

Go Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))

Specific Heat of Electrolyte

Go Specific Heat Capacity of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Density of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))

Heat Absorbed by Electrolyte

Go Heat Absorption of Electrolyte = Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature)

Boiling Point of Electrolyte

Go Boiling Point of Electrolyte = Ambient Air Temperature+Heat Absorption of Electrolyte/(Volume Flow Rate*Density of Electrolyte*Specific Heat Capacity of Electrolyte)

Supply Voltage given Specific Resistivity of Electrolyte

Go Supply Voltage = Specific Resistance of The Electrolyte*Gap Between Tool and Work Surface*Electric Current/Area of Penetration

Density of Electrolyte from Heat Absorbed Electrolyte Formula

Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature))
ρ_e = H_e/(q*c_e*(θ_B-θ_o))

What is Faraday's I law of electrolysis ?

The first law of Faraday’s electrolysis states that the chemical change produced during electrolysis is proportional to the current passed and the electrochemical equivalence of the anode material.

How to Calculate Density of Electrolyte from Heat Absorbed Electrolyte?

Density of Electrolyte from Heat Absorbed Electrolyte calculator uses Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature)) to calculate the Density of Electrolyte, The density of electrolyte from heat absorbed electrolyte formula is defined as the ratio of mass per unit volume of the given electrolyte. Density of Electrolyte is denoted by ρ_e symbol.

How to calculate Density of Electrolyte from Heat Absorbed Electrolyte using this online calculator? To use this online calculator for Density of Electrolyte from Heat Absorbed Electrolyte, enter Heat Absorption of Electrolyte (H_e), Volume Flow Rate (q), Specific Heat Capacity of Electrolyte (c_e), Boiling Point of Electrolyte (θ_B) & Ambient Air Temperature (θ_o) and hit the calculate button. Here is how the Density of Electrolyte from Heat Absorbed Electrolyte calculation can be explained with given input values -> 998891.2 = 12000/(4.799086E-05*4180*(368.15-308.15)).

FAQ

What is Density of Electrolyte from Heat Absorbed Electrolyte?

The density of electrolyte from heat absorbed electrolyte formula is defined as the ratio of mass per unit volume of the given electrolyte and is represented as ρ_e = H_e/(q*c_e*(θ_B-θ_o)) or Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature)). Heat Absorption of Electrolyte is the Heat absorbed by the electrolyte, Volume Flow Rate is the volume of fluid that passes per unit of time, Specific Heat Capacity of electrolyte is the heat required to raise the temperature of the unit mass of a given substance by a given amount, Boiling Point of electrolyte is the temperature at which a liquid starts to boil and transforms to vapor & Ambient Air Temperature is the temperature where the ramming process starts.

How to calculate Density of Electrolyte from Heat Absorbed Electrolyte?

The density of electrolyte from heat absorbed electrolyte formula is defined as the ratio of mass per unit volume of the given electrolyte is calculated using Density of Electrolyte = Heat Absorption of Electrolyte/(Volume Flow Rate*Specific Heat Capacity of Electrolyte*(Boiling Point of Electrolyte-Ambient Air Temperature)). To calculate Density of Electrolyte from Heat Absorbed Electrolyte, you need Heat Absorption of Electrolyte (H_e), Volume Flow Rate (q), Specific Heat Capacity of Electrolyte (c_e), Boiling Point of Electrolyte (θ_B) & Ambient Air Temperature (θ_o). With our tool, you need to enter the respective value for Heat Absorption of Electrolyte, Volume Flow Rate, Specific Heat Capacity of Electrolyte, Boiling Point of Electrolyte & Ambient Air Temperature and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search