Discharge when End Contractions is suppressed and Velocity is considered Solution

STEP 0: Pre-Calculation Summary
Formula Used
Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2))
QFr' = 1.84*Lw*(HStillwater^(3/2)-HV^(3/2))
This formula uses 4 Variables
Variables Used
Francis Discharge with Suppressed End - (Measured in Cubic Meter per Second) - Francis Discharge with Suppressed End is discharge of flow without the end contraction.
Length of Weir Crest - (Measured in Meter) - Length of Weir Crest is the measurement or extent of Weir Crest from end to end.
Still Water Head - (Measured in Meter) - Still Water Head is the head of water which is still over weir.
Velocity Head - (Measured in Meter) - Velocity Head is represented in the term of length unit, also referred to as kinetic head represents the kinetic energy of the fluid.
STEP 1: Convert Input(s) to Base Unit
Length of Weir Crest: 3 Meter --> 3 Meter No Conversion Required
Still Water Head: 6.6 Meter --> 6.6 Meter No Conversion Required
Velocity Head: 4.6 Meter --> 4.6 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
QFr' = 1.84*Lw*(HStillwater^(3/2)-HV^(3/2)) --> 1.84*3*(6.6^(3/2)-4.6^(3/2))
Evaluating ... ...
QFr' = 39.1357298522581
STEP 3: Convert Result to Output's Unit
39.1357298522581 Cubic Meter per Second --> No Conversion Required
FINAL ANSWER
39.1357298522581 39.13573 Cubic Meter per Second <-- Francis Discharge with Suppressed End
(Calculation completed in 00.004 seconds)

Credits

Created by M Naveen
National Institute of Technology (NIT), Warangal
M Naveen has created this Calculator and 500+ more calculators!
Verified by Mithila Muthamma PA
Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

7 Discharge Calculators

Discharge considering Approach Velocity
Go Francis Discharge = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*(Length of Weir Crest-0.1*Number of End Contraction*Still Water Head)*(Still Water Head^(3/2)-Velocity Head^(3/2))
Discharge Passing over Weir considering Velocity
Go Francis Discharge with Suppressed End = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest*((Height of Water above Crest of Weir+Velocity Head)^(3/2)-Velocity Head^(3/2))
Discharge over Weir without considering Velocity
Go Francis Discharge with Suppressed End = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest*Height of Water above Crest of Weir^(3/2)
Discharge for Notch which is to be Calibrated
Go Francis Discharge with Suppressed End = Constant of Flow*Height of Water above Crest of Weir^Number of End Contraction
Discharge when End Contractions is suppressed and Velocity is considered
Go Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2))
Discharge given Velocity Approach
Go Discharge by Approach Velocity = Velocity of Flow 1*(Width of Channel1*Depth of Flow)
Discharge when End Contractions is suppressed and Velocity is not considered
Go Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*Height of Water above Crest of Weir^(3/2)

Discharge when End Contractions is suppressed and Velocity is considered Formula

Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2))
QFr' = 1.84*Lw*(HStillwater^(3/2)-HV^(3/2))

What is meant by Discharge?

Discharge when End Contractions is Suppressed and Velocity is Considered is defined as a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass.

What is a weir?

A weir or low head dam is a barrier across the width of a river that alters the flow characteristics of water and usually results in a change in the height of the river level. They are also used to control the flow of water for outlets of lakes, ponds, and reservoirs.

How to Calculate Discharge when End Contractions is suppressed and Velocity is considered?

Discharge when End Contractions is suppressed and Velocity is considered calculator uses Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2)) to calculate the Francis Discharge with Suppressed End, Discharge when End Contractions is suppressed and Velocity is considered is defined as a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass. Francis Discharge with Suppressed End is denoted by QFr' symbol.

How to calculate Discharge when End Contractions is suppressed and Velocity is considered using this online calculator? To use this online calculator for Discharge when End Contractions is suppressed and Velocity is considered, enter Length of Weir Crest (Lw), Still Water Head (HStillwater) & Velocity Head (HV) and hit the calculate button. Here is how the Discharge when End Contractions is suppressed and Velocity is considered calculation can be explained with given input values -> 39.13573 = 1.84*3*(6.6^(3/2)-4.6^(3/2)).

FAQ

What is Discharge when End Contractions is suppressed and Velocity is considered?
Discharge when End Contractions is suppressed and Velocity is considered is defined as a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass and is represented as QFr' = 1.84*Lw*(HStillwater^(3/2)-HV^(3/2)) or Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2)). Length of Weir Crest is the measurement or extent of Weir Crest from end to end, Still Water Head is the head of water which is still over weir & Velocity Head is represented in the term of length unit, also referred to as kinetic head represents the kinetic energy of the fluid.
How to calculate Discharge when End Contractions is suppressed and Velocity is considered?
Discharge when End Contractions is suppressed and Velocity is considered is defined as a measure of the quantity of any fluid flow over unit time. The quantity may be either volume or mass is calculated using Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*(Still Water Head^(3/2)-Velocity Head^(3/2)). To calculate Discharge when End Contractions is suppressed and Velocity is considered, you need Length of Weir Crest (Lw), Still Water Head (HStillwater) & Velocity Head (HV). With our tool, you need to enter the respective value for Length of Weir Crest, Still Water Head & Velocity Head and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Francis Discharge with Suppressed End?
In this formula, Francis Discharge with Suppressed End uses Length of Weir Crest, Still Water Head & Velocity Head. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Francis Discharge with Suppressed End = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest*Height of Water above Crest of Weir^(3/2)
  • Francis Discharge with Suppressed End = (2/3)*Coefficient of Discharge*sqrt(2*Acceleration due to Gravity)*Length of Weir Crest*((Height of Water above Crest of Weir+Velocity Head)^(3/2)-Velocity Head^(3/2))
  • Francis Discharge with Suppressed End = Constant of Flow*Height of Water above Crest of Weir^Number of End Contraction
  • Francis Discharge with Suppressed End = 1.84*Length of Weir Crest*Height of Water above Crest of Weir^(3/2)
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!