Energy per Spark from Depth of Crater Calculator

✖Depth of machined surface energydel/spark, is the how deep a surface is machined from the un-machined surface.ⓘ Depth of Machined Surface Energydel/spark [d_m]			+10% -10%
✖Empirical Constant energydel/spark, influencing empirical relationships supported by confirmatory data irrespective of theoretical basis such as first principles.ⓘ Empirical Constant Energydel/spark [a]			+10% -10%

✖Energy delivered per spark in Energydel/spark, is the energy produced for EDM.ⓘ Energy per Spark from Depth of Crater [P_eds]

⎘ Copy

👎

Formula

✖

Energy per Spark from Depth of Crater

Formula

`"P"_{"eds"} = ("d"_{"m"}/"a")^(1/0.33)`

Example

`"11.99997W"=("1248.798mm"/"0.55")^(1/0.33)`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Energy per Spark from Depth of Crater Solution

STEP 0: Pre-Calculation Summary

Formula Used

Energy Delivered per Spark in Energydel/spark = (Depth of Machined Surface Energydel/spark/Empirical Constant Energydel/spark)^(1/0.33)
P_eds = (d_m/a)^(1/0.33)
This formula uses 3 Variables

Variables Used

Energy Delivered per Spark in Energydel/spark - (Measured in Watt) - Energy delivered per spark in Energydel/spark, is the energy produced for EDM.
Depth of Machined Surface Energydel/spark - (Measured in Meter) - Depth of machined surface energydel/spark, is the how deep a surface is machined from the un-machined surface.
Empirical Constant Energydel/spark - Empirical Constant energydel/spark, influencing empirical relationships supported by confirmatory data irrespective of theoretical basis such as first principles.

STEP 1: Convert Input(s) to Base Unit

Depth of Machined Surface Energydel/spark: 1248.798 Millimeter --> 1.248798 Meter (Check conversion here)
Empirical Constant Energydel/spark: 0.55 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

P_eds = (d_m/a)^(1/0.33) --> (1.248798/0.55)^(1/0.33)

Evaluating ... ...

P_eds = 11.9999743638786

STEP 3: Convert Result to Output's Unit

11.9999743638786 Watt --> No Conversion Required

FINAL ANSWER

11.9999743638786 ≈ 11.99997 Watt <-- Energy Delivered per Spark in Energydel/spark

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Unconventional machining processes » Electro Discharge Machining (EDM) » System Analysis in EDM » Relaxation Circuit used for Generating Pulses in EDM » Energy Delivered per Spark » Energy per Spark from Depth of Crater

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 5 Energy Delivered per Spark Calculators

Charging Voltage from Energy per Spark

Go Voltage at Any Time t Energydel/spark = sqrt((2*Energy Delivered per Spark in Energydel/spark)/Capacitance Energydel/Spark)

Energy per Spark from Depth of Crater

Go Energy Delivered per Spark in Energydel/spark = (Depth of Machined Surface Energydel/spark/Empirical Constant Energydel/spark)^(1/0.33)

Depth of Crater

Go Depth of Machined Surface Energydel/spark = Empirical Constant Energydel/spark*Energy Delivered per Spark in Energydel/spark^0.33

Capacitance of Circuit from Energy per Spark EDM

Go Capacitance Energydel/Spark = (2*Energy Delivered per Spark in Energydel/spark)/Voltage at Any Time t Energydel/spark^2

Energy Delivered per Spark

Go Energy Delivered per Spark in Energydel/spark = 0.5*Capacitance Energydel/Spark*Voltage at Any Time t Energydel/spark^2

Energy per Spark from Depth of Crater Formula

Energy Delivered per Spark in Energydel/spark = (Depth of Machined Surface Energydel/spark/Empirical Constant Energydel/spark)^(1/0.33)
P_eds = (d_m/a)^(1/0.33)

What factors affects surface finish during EDM ?

The amount of material removed and the surface finish produced is dependent upon the current in the spark. The material removed by the spark can be assumed to be a crater. The amount removed therefore will depend upon the crater depth, which is directly proportional to the current. Thus as the material removed increases and at the same time the surface finish also decreases. However, decreasing the current in the spark, but increasing its frequency will improve the surface finish in view of the small crater size, but at the same time the material removal rate can be maintained by increasing the frequency.

How to Calculate Energy per Spark from Depth of Crater?

Energy per Spark from Depth of Crater calculator uses Energy Delivered per Spark in Energydel/spark = (Depth of Machined Surface Energydel/spark/Empirical Constant Energydel/spark)^(1/0.33) to calculate the Energy Delivered per Spark in Energydel/spark, The Energy per spark from depth of crater formula is defined as the parameter which defines the amount of material removed and the surface finish produced. Energy Delivered per Spark in Energydel/spark is denoted by P_eds symbol.

How to calculate Energy per Spark from Depth of Crater using this online calculator? To use this online calculator for Energy per Spark from Depth of Crater, enter Depth of Machined Surface Energydel/spark (d_m) & Empirical Constant Energydel/spark (a) and hit the calculate button. Here is how the Energy per Spark from Depth of Crater calculation can be explained with given input values -> 11.99997 = (1.248798/0.55)^(1/0.33).

FAQ

What is Energy per Spark from Depth of Crater?

The Energy per spark from depth of crater formula is defined as the parameter which defines the amount of material removed and the surface finish produced and is represented as P_eds = (d_m/a)^(1/0.33) or Energy Delivered per Spark in Energydel/spark = (Depth of Machined Surface Energydel/spark/Empirical Constant Energydel/spark)^(1/0.33). Depth of machined surface energydel/spark, is the how deep a surface is machined from the un-machined surface & Empirical Constant energydel/spark, influencing empirical relationships supported by confirmatory data irrespective of theoretical basis such as first principles.

How to calculate Energy per Spark from Depth of Crater?

The Energy per spark from depth of crater formula is defined as the parameter which defines the amount of material removed and the surface finish produced is calculated using Energy Delivered per Spark in Energydel/spark = (Depth of Machined Surface Energydel/spark/Empirical Constant Energydel/spark)^(1/0.33). To calculate Energy per Spark from Depth of Crater, you need Depth of Machined Surface Energydel/spark (d_m) & Empirical Constant Energydel/spark (a). With our tool, you need to enter the respective value for Depth of Machined Surface Energydel/spark & Empirical Constant Energydel/spark and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Energy Delivered per Spark in Energydel/spark?

In this formula, Energy Delivered per Spark in Energydel/spark uses Depth of Machined Surface Energydel/spark & Empirical Constant Energydel/spark. We can use 1 other way(s) to calculate the same, which is/are as follows -

Energy Delivered per Spark in Energydel/spark = 0.5*Capacitance Energydel/Spark*Voltage at Any Time t Energydel/spark^2

Home

FREE PDFs

🔍 Search