🔍
🔍

## Credits

Coorg Institute of Technology (CIT), Coorg
Mithila Muthamma PA has created this Calculator and 1000+ more calculators!
NSS College of Engineering (NSSCE), Palakkad
Chandana P Dev has verified this Calculator and 1000+ more calculators!

## Force on the Fluid Element Solution

STEP 0: Pre-Calculation Summary
Formula Used
force = -Pressure*Area Element*Unit Vector Normal to the Surface
F = -P*δA*
This formula uses 3 Variables
Variables Used
Pressure - The pressure is defined as the physical force exerted on an object. It is symbolized by P. (Measured in Pascal)
Area Element - Area Element of fluid the force is being acted upon. (Measured in Square Millimeter)
Unit Vector Normal to the Surface- Unit Vector Normal to the Surface
STEP 1: Convert Input(s) to Base Unit
Pressure: 800 Pascal --> 800 Pascal No Conversion Required
Area Element: 10 Square Millimeter --> 1E-05 Square Meter (Check conversion here)
Unit Vector Normal to the Surface: 1 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
F = -P*δA* --> -800*1E-05*1
Evaluating ... ...
F = -0.008
STEP 3: Convert Result to Output's Unit
-0.008 Newton --> No Conversion Required
FINAL ANSWER
-0.008 Newton <-- Force
(Calculation completed in 00.016 seconds)

## < 11 Other formulas that you can solve using the same Inputs

exact normal shock-wave maximum coefficient of pressure
pressure_coefficient_max = (2/(Specific Heat Ratio*(Mach Number^2)))*((Total Pressure/Pressure)-1) Go
Maximum Pressure coefficient
pressure_coefficient_max = (Total Pressure-Pressure)/(0.5*Density*(Freestream Velocity)^2) Go
Cavitation Number
cavitation_number = (Pressure-Vapour Pressure)/(mass density*(Fluid Velocity^2)/2) Go
Compressibility Factor
compressibility_factor = Pressure*Specific Volume/([R]*Temperature) Go
Velocity of sound using dynamic pressure and density
speed_sound = sqrt((Specific Heat Ratio*Pressure)/Density) Go
Theoretical torque developed
theoretical_torque = (Pressure*Theoretical volumetric displacement*60)/(2*pi) Go
Non-dimensional pressure
non_dimensionalized_pressure = Pressure/(Density*(Freestream Velocity)^2) Go
Ideal Gas Law for Calculating Volume
ideal_gas_law_for_calculating_volume = [R]*Temperature/Pressure Go
Work Done in Isobaric Process
w_isobaric = Pressure*(Volume of gas 2-Volume of gas 1) Go
Reduced Pressure
reduced_pressure = Pressure/Critical Pressure Go
Buoyant Force
buoyant_force = Pressure*Area Go

## < 11 Other formulas that calculate the same Output

Force required to lower the load by a screw jack when weight of load, helix angle and coefficient of friction is known
force = Weight of Load*((Coefficient of Friction*cos(Helix Angle))-sin(Helix Angle))/(cos(Helix Angle)+(Coefficient of Friction*sin(Helix Angle))) Go
Force at circumference of the screw when weight of load, helix angle and coefficient of friction is known
force = Weight*((sin(Helix Angle)+(Coefficient of Friction*cos(Helix Angle)))/(cos(Helix Angle)-(Coefficient of Friction*sin(Helix Angle)))) Go
Frictional force in V belt drive
force = Coefficient of friction between the belt and sides of the groove*Total reaction in the plane of the groove*cosec(Angle of the groove/2) Go
Force of Friction between the cylinder and the surface of inclined plane if cylinder is rolling without slipping down a ramp
force = (Mass*Acceleration Due To Gravity*sin(Angle of Inclination))/3 Go
Force required to lower the load by a screw jack when weight of load, helix angle and limiting angle is known
force = Weight of Load*tan(Limiting angle of friction-Helix Angle) Go
Force at circumference of the screw when weight of load, helix angle and limiting angle is known
force = Weight of Load*tan(Helix Angle+Limiting angle of friction) Go
Universal Law of Gravitation
force = (2*[G.]*Mass 1*Mass 2)/Radius^2 Go
Force between parallel plate capacitors
force = Charge^2/(2*parallel plate capacitance*radius) Go
Restoring force due to spring
force = Stiffness of spring*Displacement of load below equilibrium position Go
Force By A Linear Induction Motor
force = Power/Linear Synchronous Speed Go
Force
force = Mass*Acceleration Go

### Force on the Fluid Element Formula

force = -Pressure*Area Element*Unit Vector Normal to the Surface
F = -P*δA*

## What are Tides?

Tides are very long-period waves that move through the oceans in response to the forces exerted by the moon and sun. Tides originate in the oceans and progress toward the coastlines where they appear as the regular rise and fall of the sea surface.

## How to Calculate Force on the Fluid Element?

Force on the Fluid Element calculator uses force = -Pressure*Area Element*Unit Vector Normal to the Surface to calculate the Force, The Force on the Fluid Element is defined as the force per unit area normal to the surface of a fluid element from unit vector normal to the surface. Force and is denoted by F symbol.

How to calculate Force on the Fluid Element using this online calculator? To use this online calculator for Force on the Fluid Element, enter Pressure (P), Area Element (δA) and Unit Vector Normal to the Surface (nˆ) and hit the calculate button. Here is how the Force on the Fluid Element calculation can be explained with given input values -> -0.008 = -800*1E-05*1.

### FAQ

What is Force on the Fluid Element?
The Force on the Fluid Element is defined as the force per unit area normal to the surface of a fluid element from unit vector normal to the surface and is represented as F = -P*δA* or force = -Pressure*Area Element*Unit Vector Normal to the Surface. The pressure is defined as the physical force exerted on an object. It is symbolized by P, Area Element of fluid the force is being acted upon and Unit Vector Normal to the Surface.
How to calculate Force on the Fluid Element?
The Force on the Fluid Element is defined as the force per unit area normal to the surface of a fluid element from unit vector normal to the surface is calculated using force = -Pressure*Area Element*Unit Vector Normal to the Surface. To calculate Force on the Fluid Element, you need Pressure (P), Area Element (δA) and Unit Vector Normal to the Surface (nˆ). With our tool, you need to enter the respective value for Pressure, Area Element and Unit Vector Normal to the Surface and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Force?
In this formula, Force uses Pressure, Area Element and Unit Vector Normal to the Surface. We can use 11 other way(s) to calculate the same, which is/are as follows -
• force = Mass*Acceleration
• force = (2*[G.]*Mass 1*Mass 2)/Radius^2
• force = (Mass*Acceleration Due To Gravity*sin(Angle of Inclination))/3
• force = Charge^2/(2*parallel plate capacitance*radius)
• force = Stiffness of spring*Displacement of load below equilibrium position
• force = Power/Linear Synchronous Speed
• force = Weight*((sin(Helix Angle)+(Coefficient of Friction*cos(Helix Angle)))/(cos(Helix Angle)-(Coefficient of Friction*sin(Helix Angle))))
• force = Weight of Load*tan(Helix Angle+Limiting angle of friction)
• force = Weight of Load*((Coefficient of Friction*cos(Helix Angle))-sin(Helix Angle))/(cos(Helix Angle)+(Coefficient of Friction*sin(Helix Angle)))
• force = Weight of Load*tan(Limiting angle of friction-Helix Angle)
• force = Coefficient of friction between the belt and sides of the groove*Total reaction in the plane of the groove*cosec(Angle of the groove/2) Let Others Know
LinkedIn
Email
WhatsApp
Copied!