Henry Law Constant using Mole Fraction and Partial Pressure of Gas Calculator

✖Partial Pressure is the notional pressure of that constituent gas if it alone occupied the entire volume of the original mixture at the same temperature.ⓘ Partial Pressure [p_partial]			+10% -10%
✖The Mole Fraction of Component in Liquid Phase can be defined as the ratio of the number of moles a component to the total number of moles of components present in the liquid phase.ⓘ Mole Fraction of Component in Liquid Phase [x_Liquid]			+10% -10%

✖Henry Law Constant is a measure of the concentration of a chemical in air over its concentration in water.ⓘ Henry Law Constant using Mole Fraction and Partial Pressure of Gas [K_H]

⎘ Copy

👎

Formula

✖

Henry Law Constant using Mole Fraction and Partial Pressure of Gas

Formula

`"K"_{"H"} = "p"_{"partial"}/"x"_{"Liquid"}`

Example

`"0.392157Pa/mol/m³"="0.2Pa"/"0.51"`

Calculator

LaTeX

Reset

👍

Download Chemical Engineering Formula PDF

Henry Law Constant using Mole Fraction and Partial Pressure of Gas Solution

STEP 0: Pre-Calculation Summary

Formula Used

Henry Law Constant = Partial Pressure/Mole Fraction of Component in Liquid Phase
K_H = p_partial/x_Liquid
This formula uses 3 Variables

Variables Used

Henry Law Constant - (Measured in Pascal Cubic Meter per Mole) - Henry Law Constant is a measure of the concentration of a chemical in air over its concentration in water.
Partial Pressure - (Measured in Pascal) - Partial Pressure is the notional pressure of that constituent gas if it alone occupied the entire volume of the original mixture at the same temperature.
Mole Fraction of Component in Liquid Phase - The Mole Fraction of Component in Liquid Phase can be defined as the ratio of the number of moles a component to the total number of moles of components present in the liquid phase.

STEP 1: Convert Input(s) to Base Unit

Partial Pressure: 0.2 Pascal --> 0.2 Pascal No Conversion Required
Mole Fraction of Component in Liquid Phase: 0.51 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

K_H = p_partial/x_Liquid --> 0.2/0.51

Evaluating ... ...

K_H = 0.392156862745098

STEP 3: Convert Result to Output's Unit

0.392156862745098 Pascal Cubic Meter per Mole --> No Conversion Required

FINAL ANSWER

0.392156862745098 ≈ 0.392157 Pascal Cubic Meter per Mole <-- Henry Law Constant

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Chemical Engineering » Thermodynamics » Ideal Gas » Henry Law Constant using Mole Fraction and Partial Pressure of Gas

Credits

Created by Shivam Sinha

National Institute Of Technology (NIT), Surathkal

Shivam Sinha has created this Calculator and 300+ more calculators!

Verified by Akshada Kulkarni

National Institute of Information Technology (NIIT), Neemrana

Akshada Kulkarni has verified this Calculator and 900+ more calculators!

< 20 Ideal Gas Calculators

Work Done in Adiabatic Process using Specific Heat Capacity at Constant Pressure and Volume

Go Work done in Thermodynamic Process = (Initial Pressure of System*Initial Volume of System-Final Pressure of System*Final Volume of System)/((Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume)-1)

Final Temperature in Adiabatic Process (using pressure)

Go Final Temperature in Adiabatic Process = Initial temperature of Gas*(Final Pressure of System/Initial Pressure of System)^(1-1/(Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume))

Final Temperature in Adiabatic Process (using volume)

Go Final Temperature in Adiabatic Process = Initial temperature of Gas*(Initial Volume of System/Final Volume of System)^((Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume)-1)

Work Done in Isothermal Process (using volume)

Go Work done in Thermodynamic Process = Number of Moles of Ideal Gas*[R]*Temperature of Gas*ln(Final Volume of System/Initial Volume of System)

Heat Transferred in Isothermal Process (using Pressure)

Go Heat Transferred in Thermodynamic Process = [R]*Initial temperature of Gas*ln(Initial Pressure of System/Final Pressure of System)

Heat Transferred in Isothermal Process (using Volume)

Go Heat Transferred in Thermodynamic Process = [R]*Initial temperature of Gas*ln(Final Volume of System/Initial Volume of System)

Work done in Isothermal Process (using Pressure)

Go Work done in Thermodynamic Process = [R]*Temperature of Gas*ln(Initial Pressure of System/Final Pressure of System)

Relative Humidity

Go Relative Humidity = Specific Humidity*Partial Pressure/((0.622+Specific Humidity)*Vapor Pressure of Pure Component A)

Heat Transfer in Isobaric Process

Go Heat Transferred in Thermodynamic Process = Number of Moles of Ideal Gas*Molar Specific Heat Capacity at Constant Pressure*Temperature Difference

Heat Transfer in Isochoric Process

Go Heat Transferred in Thermodynamic Process = Number of Moles of Ideal Gas*Molar Specific Heat Capacity at Constant Volume*Temperature Difference

Change in Internal Energy of System

Go Change in Internal Energy = Number of Moles of Ideal Gas*Molar Specific Heat Capacity at Constant Volume*Temperature Difference

Enthalpy of System

Go System Enthalpy = Number of Moles of Ideal Gas*Molar Specific Heat Capacity at Constant Pressure*Temperature Difference

Ideal Gas Law for Calculating Volume

Go Ideal Gas Law for Calculating Volume = [R]*Temperature of Gas/Total Pressure of Ideal Gas

Ideal Gas Law for Calculating Pressure

Go Ideal Gas Law for calculating Pressure = [R]*(Temperature of Gas)/Total Volume of System

Adiabatic Index

Go Heat Capacity Ratio = Molar Specific Heat Capacity at Constant Pressure/Molar Specific Heat Capacity at Constant Volume

Specific Heat Capacity at Constant Pressure

Go Molar Specific Heat Capacity at Constant Pressure = [R]+Molar Specific Heat Capacity at Constant Volume

Specific Heat Capacity at Constant Volume

Go Molar Specific Heat Capacity at Constant Volume = Molar Specific Heat Capacity at Constant Pressure-[R]

Henry Law Constant using Mole Fraction and Partial Pressure of Gas

Go Henry Law Constant = Partial Pressure/Mole Fraction of Component in Liquid Phase

Mole Fraction of Dissolved Gas using Henry Law

Go Mole Fraction of Component in Liquid Phase = Partial Pressure/Henry Law Constant

Partial Pressure using Henry Law

Go Partial Pressure = Henry Law Constant*Mole Fraction of Component in Liquid Phase

Henry Law Constant using Mole Fraction and Partial Pressure of Gas Formula

Henry Law Constant = Partial Pressure/Mole Fraction of Component in Liquid Phase
K_H = p_partial/x_Liquid

What is Henry’s Law?

Henry’s law is a gas law that states that the amount of gas that is dissolved in a liquid is directly proportional to the partial pressure of that gas above the liquid when the temperature is kept constant. The constant of proportionality for this relationship is called Henry’s law constant.

What is Quasi Static Process?

It is Infinitely slow process. It's Path can be defined. There is no dissipation effects like friction etc. Both System and surroundings can be restored to
their initial state. System follows the same path if we reverse the
process. Quasi static process are also called reversible
process.

How to Calculate Henry Law Constant using Mole Fraction and Partial Pressure of Gas?

Henry Law Constant using Mole Fraction and Partial Pressure of Gas calculator uses Henry Law Constant = Partial Pressure/Mole Fraction of Component in Liquid Phase to calculate the Henry Law Constant, The Henry Law Constant using Mole Fraction and Partial Pressure of Gas in Henry Law formula is defined as the ratio of the partial pressure of the gas to the mole fraction of dissolved gas. Henry Law Constant is denoted by K_H symbol.

How to calculate Henry Law Constant using Mole Fraction and Partial Pressure of Gas using this online calculator? To use this online calculator for Henry Law Constant using Mole Fraction and Partial Pressure of Gas, enter Partial Pressure (p_partial) & Mole Fraction of Component in Liquid Phase (x_Liquid) and hit the calculate button. Here is how the Henry Law Constant using Mole Fraction and Partial Pressure of Gas calculation can be explained with given input values -> 14.70588 = 0.2/0.51.

FAQ

What is Henry Law Constant using Mole Fraction and Partial Pressure of Gas?

The Henry Law Constant using Mole Fraction and Partial Pressure of Gas in Henry Law formula is defined as the ratio of the partial pressure of the gas to the mole fraction of dissolved gas and is represented as K_H = p_partial/x_Liquid or Henry Law Constant = Partial Pressure/Mole Fraction of Component in Liquid Phase. Partial Pressure is the notional pressure of that constituent gas if it alone occupied the entire volume of the original mixture at the same temperature & The Mole Fraction of Component in Liquid Phase can be defined as the ratio of the number of moles a component to the total number of moles of components present in the liquid phase.

How to calculate Henry Law Constant using Mole Fraction and Partial Pressure of Gas?

The Henry Law Constant using Mole Fraction and Partial Pressure of Gas in Henry Law formula is defined as the ratio of the partial pressure of the gas to the mole fraction of dissolved gas is calculated using Henry Law Constant = Partial Pressure/Mole Fraction of Component in Liquid Phase. To calculate Henry Law Constant using Mole Fraction and Partial Pressure of Gas, you need Partial Pressure (p_partial) & Mole Fraction of Component in Liquid Phase (x_Liquid). With our tool, you need to enter the respective value for Partial Pressure & Mole Fraction of Component in Liquid Phase and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search