How the spark is produced in Electric Discharge Machining ?
A typical circuit used for supplying the power to an EDM machine is named as the relaxation circuit. The circuit consists of a DC power source, which charges the capacitor ‘C’ across a resistance ‘Rc’. Initially when the capacitor is in the uncharged condition, when the power supply is on with a voltage of Vo, a heavy current, ic, will flow in the circuit as shown to charge the capacitor. The relaxation circuit as explained above was used in the early EDM machines. They are limited to the low material removal rates for fine finish, which limits its application. This can be explained from the fact that the time spent on charging the capacitor is quite large during which time, no machining can actually take place. Thus the material removal rates are low.
How to Calculate Inductance of Circuit from Sparking Time?
Inductance of Circuit from Sparking Time calculator uses Inductance of Spark Time = ((Sparking Time/pi)^2)/Capacitance to calculate the Inductance of Spark Time, Inductance of circuit from sparking time formula is defined as the equivalent inductance of the inductors associated with the sparking circuit of the EDM. Inductance of Spark Time is denoted by Lt symbol.
How to calculate Inductance of Circuit from Sparking Time using this online calculator? To use this online calculator for Inductance of Circuit from Sparking Time, enter Sparking Time (ts) & Capacitance (Ct) and hit the calculate button. Here is how the Inductance of Circuit from Sparking Time calculation can be explained with given input values -> 5.710391 = ((16.77/pi)^2)/4.99.