Initial weight of workpiece given Loading and Unloading time Solution

STEP 0: Pre-Calculation Summary
Formula Used
Initial Work Piece Weight = (Loading and Unloading Time-Constant for Tool Type(c))/Constant for Tool Type(d)
W = (tln-c)/d
This formula uses 4 Variables
Variables Used
Initial Work Piece Weight - (Measured in Kilogram) - The Initial work piece weight is defined as the weight of the work piece before undergoing machining operation.
Loading and Unloading Time - (Measured in Second) - Loading and Unloading time is the time required to load/unload the workpiece before the start of machine operation.
Constant for Tool Type(c) - (Measured in Radian) - Constant for tool type(c) is defined as the constant for the type of material used in the tool.
Constant for Tool Type(d) - Constant for tool type(d) is defined as the constant for the type of material used in the tool.
STEP 1: Convert Input(s) to Base Unit
Loading and Unloading Time: 0.5 Minute --> 30 Second (Check conversion here)
Constant for Tool Type(c): 0.4 Radian --> 0.4 Radian No Conversion Required
Constant for Tool Type(d): 1.1 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
W = (tln-c)/d --> (30-0.4)/1.1
Evaluating ... ...
W = 26.9090909090909
STEP 3: Convert Result to Output's Unit
26.9090909090909 Kilogram --> No Conversion Required
FINAL ANSWER
26.9090909090909 26.90909 Kilogram <-- Initial Work Piece Weight
(Calculation completed in 00.004 seconds)

Credits

Created by Parul Keshav
National Institute of Technology (NIT), Srinagar
Parul Keshav has created this Calculator and 300+ more calculators!
Verified by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

7 Initial Weight of Workpiece Calculators

Initial weight of workpiece given Total rate for Machining and Operator
Go Initial Work Piece Weight = ((Total Rate of Machining and Operator-(Factor to allow for Operator*Direct Labor Rate))*(2*Amortized Years*Number of Shifts)/(Constant for Tool Type(e)*Factor to allow for Machining))^(1/Constant for Tool Type(f))
Initial weight of workpiece given Machining time for maximum power
Go Initial Work Piece Weight = ((Density of work piece*Constant for Tool Type(a)*Machining Time for Maximum Power)/(Proportion of Initial Volume*Specific Cutting Energy in Machining))^(1/(1-Constant for Tool Type(b)))
Initial weight of workpiece given Power available for Machining
Go Initial Work Piece Weight = (Power Available for Machining/Constant for Tool Type(a))^(1/Constant for Tool Type(b))
Initial weight of workpiece given Loading and Unloading time
Go Initial Work Piece Weight = (Loading and Unloading Time-Constant for Tool Type(c))/Constant for Tool Type(d)
Initial weight of workpiece given Cost of Machine tool
Go Initial Work Piece Weight = (Cost of a Tool/Constant for Tool Type(e))^(1/Constant for Tool Type(f))
Initial weight of workpiece given Machining time under Max power for free machining
Go Initial Work Piece Weight = (Machining Time for Maximum Power/49.9)^(1/0.47)
Initial weight of workpiece given Length-to-diameter Ratio
Go Initial Work Piece Weight = (1.26/Length to Diameter Ratio)^(1/0.29)

Initial weight of workpiece given Loading and Unloading time Formula

Initial Work Piece Weight = (Loading and Unloading Time-Constant for Tool Type(c))/Constant for Tool Type(d)
W = (tln-c)/d

What is hard turning process?

Hard turning is typically defined as the turning of a part or bar stock of harder than 45HRC on a lathe or turning center. Since surface roughness of Rmax/Rz=1.6s can be achieved, hard turning is often considered a replacement for grinding operations or as a pre-grinding process.

How to Calculate Initial weight of workpiece given Loading and Unloading time?

Initial weight of workpiece given Loading and Unloading time calculator uses Initial Work Piece Weight = (Loading and Unloading Time-Constant for Tool Type(c))/Constant for Tool Type(d) to calculate the Initial Work Piece Weight, The Initial weight of workpiece given Loading and Unloading time is defined as the weight of the workpiece before undergoing machining operation. Initial Work Piece Weight is denoted by W symbol.

How to calculate Initial weight of workpiece given Loading and Unloading time using this online calculator? To use this online calculator for Initial weight of workpiece given Loading and Unloading time, enter Loading and Unloading Time (tln), Constant for Tool Type(c) (c) & Constant for Tool Type(d) (d) and hit the calculate button. Here is how the Initial weight of workpiece given Loading and Unloading time calculation can be explained with given input values -> 26.90909 = (30-0.4)/1.1.

FAQ

What is Initial weight of workpiece given Loading and Unloading time?
The Initial weight of workpiece given Loading and Unloading time is defined as the weight of the workpiece before undergoing machining operation and is represented as W = (tln-c)/d or Initial Work Piece Weight = (Loading and Unloading Time-Constant for Tool Type(c))/Constant for Tool Type(d). Loading and Unloading time is the time required to load/unload the workpiece before the start of machine operation, Constant for tool type(c) is defined as the constant for the type of material used in the tool & Constant for tool type(d) is defined as the constant for the type of material used in the tool.
How to calculate Initial weight of workpiece given Loading and Unloading time?
The Initial weight of workpiece given Loading and Unloading time is defined as the weight of the workpiece before undergoing machining operation is calculated using Initial Work Piece Weight = (Loading and Unloading Time-Constant for Tool Type(c))/Constant for Tool Type(d). To calculate Initial weight of workpiece given Loading and Unloading time, you need Loading and Unloading Time (tln), Constant for Tool Type(c) (c) & Constant for Tool Type(d) (d). With our tool, you need to enter the respective value for Loading and Unloading Time, Constant for Tool Type(c) & Constant for Tool Type(d) and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Initial Work Piece Weight?
In this formula, Initial Work Piece Weight uses Loading and Unloading Time, Constant for Tool Type(c) & Constant for Tool Type(d). We can use 6 other way(s) to calculate the same, which is/are as follows -
  • Initial Work Piece Weight = (Cost of a Tool/Constant for Tool Type(e))^(1/Constant for Tool Type(f))
  • Initial Work Piece Weight = (1.26/Length to Diameter Ratio)^(1/0.29)
  • Initial Work Piece Weight = ((Density of work piece*Constant for Tool Type(a)*Machining Time for Maximum Power)/(Proportion of Initial Volume*Specific Cutting Energy in Machining))^(1/(1-Constant for Tool Type(b)))
  • Initial Work Piece Weight = ((Total Rate of Machining and Operator-(Factor to allow for Operator*Direct Labor Rate))*(2*Amortized Years*Number of Shifts)/(Constant for Tool Type(e)*Factor to allow for Machining))^(1/Constant for Tool Type(f))
  • Initial Work Piece Weight = (Machining Time for Maximum Power/49.9)^(1/0.47)
  • Initial Work Piece Weight = (Power Available for Machining/Constant for Tool Type(a))^(1/Constant for Tool Type(b))
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!