Length of fillet leg from transverse shrinkage in T-joints Calculator

✖Transverse Shrinkage of T-Joint is a shrinkage of the metal result of contraction of the base metal.ⓘ Transverse Shrinkage of T-Joint [s_t]			+10% -10%
✖Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.ⓘ Thickness of Bottom Plate [t_b]			+10% -10%

✖Length of fillet leg in T-Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other.ⓘ Length of fillet leg from transverse shrinkage in T-joints [h_t]

⎘ Copy

👎

Formula

✖

Length of fillet leg from transverse shrinkage in T-joints

Formula

`"h"_{"t"} = ("s"_{"t"}*"t"_{"b"})/1.02`

Example

`"0.01mm"=("3.4mm"*"3mm")/1.02`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Length of fillet leg from transverse shrinkage in T-joints Solution

STEP 0: Pre-Calculation Summary

Formula Used

Length of Fillet Leg in T-Joint = (Transverse Shrinkage of T-Joint*Thickness of Bottom Plate)/1.02
h_t = (s_t*t_b)/1.02
This formula uses 3 Variables

Variables Used

Length of Fillet Leg in T-Joint - (Measured in Meter) - Length of fillet leg in T-Joint is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other.
Transverse Shrinkage of T-Joint - (Measured in Meter) - Transverse Shrinkage of T-Joint is a shrinkage of the metal result of contraction of the base metal.
Thickness of Bottom Plate - (Measured in Meter) - Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.

STEP 1: Convert Input(s) to Base Unit

Transverse Shrinkage of T-Joint: 3.4 Millimeter --> 0.0034 Meter (Check conversion here)
Thickness of Bottom Plate: 3 Millimeter --> 0.003 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

h_t = (s_t*t_b)/1.02 --> (0.0034*0.003)/1.02

Evaluating ... ...

h_t = 1E-05

STEP 3: Convert Result to Output's Unit

1E-05 Meter -->0.01 Millimeter (Check conversion here)

FINAL ANSWER

0.01 Millimeter <-- Length of Fillet Leg in T-Joint

(Calculation completed in 00.020 seconds)

You are here -

Home » Engineering » Production Engineering » Welding » Distortion in Weldments » Transverse Shrinkage in Joints » T-Joint with Two Fillets » Length of fillet leg from transverse shrinkage in T-joints

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Chilvera Bhanu Teja

Institute of Aeronautical Engineering (IARE), Hyderabad

Chilvera Bhanu Teja has verified this Calculator and 200+ more calculators!

< 3 T-Joint with Two Fillets Calculators

Length of fillet leg from transverse shrinkage in T-joints

Go Length of Fillet Leg in T-Joint = (Transverse Shrinkage of T-Joint*Thickness of Bottom Plate)/1.02

Transverse shrinkage in T-joint with Two Fillets

Go Transverse Shrinkage of T-Joint = (1.02*Length of Fillet Leg in T-Joint)/Thickness of Bottom Plate

Thickness of bottom plate in T-joints

Go Thickness of Bottom Plate = (1.02*Length of Fillet Leg in T-Joint)/Transverse Shrinkage of T-Joint

Length of fillet leg from transverse shrinkage in T-joints Formula

Length of Fillet Leg in T-Joint = (Transverse Shrinkage of T-Joint*Thickness of Bottom Plate)/1.02
h_t = (s_t*t_b)/1.02

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Length of fillet leg from transverse shrinkage in T-joints?

Length of fillet leg from transverse shrinkage in T-joints calculator uses Length of Fillet Leg in T-Joint = (Transverse Shrinkage of T-Joint*Thickness of Bottom Plate)/1.02 to calculate the Length of Fillet Leg in T-Joint, The Length of fillet leg from transverse shrinkage in T-joints formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. . Length of Fillet Leg in T-Joint is denoted by h_t symbol.

How to calculate Length of fillet leg from transverse shrinkage in T-joints using this online calculator? To use this online calculator for Length of fillet leg from transverse shrinkage in T-joints, enter Transverse Shrinkage of T-Joint (s_t) & Thickness of Bottom Plate (t_b) and hit the calculate button. Here is how the Length of fillet leg from transverse shrinkage in T-joints calculation can be explained with given input values -> 13.16765 = (0.0034*0.003)/1.02.

FAQ

What is Length of fillet leg from transverse shrinkage in T-joints?

The Length of fillet leg from transverse shrinkage in T-joints formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. and is represented as h_t = (s_t*t_b)/1.02 or Length of Fillet Leg in T-Joint = (Transverse Shrinkage of T-Joint*Thickness of Bottom Plate)/1.02. Transverse Shrinkage of T-Joint is a shrinkage of the metal result of contraction of the base metal & Thickness of Bottom Plate is the thickness of the plate that is being welded and placed flat on ground.

How to calculate Length of fillet leg from transverse shrinkage in T-joints?

The Length of fillet leg from transverse shrinkage in T-joints formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. is calculated using Length of Fillet Leg in T-Joint = (Transverse Shrinkage of T-Joint*Thickness of Bottom Plate)/1.02. To calculate Length of fillet leg from transverse shrinkage in T-joints, you need Transverse Shrinkage of T-Joint (s_t) & Thickness of Bottom Plate (t_b). With our tool, you need to enter the respective value for Transverse Shrinkage of T-Joint & Thickness of Bottom Plate and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search