Length of fillet leg in Lap joints from shrinkage Solution

STEP 0: Pre-Calculation Summary
Formula Used
Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness)/1.52
h = (s*pt)/1.52
This formula uses 3 Variables
Variables Used
Length of Fillet Leg - (Measured in Meter) - Length of fillet leg is the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other.
Transverse Shrinkage - (Measured in Meter) - Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.
Plate Thickness - (Measured in Meter) - Plate Thickness is the distance through the bearing plate.
STEP 1: Convert Input(s) to Base Unit
Transverse Shrinkage: 4.54 Millimeter --> 0.00454 Meter (Check conversion here)
Plate Thickness: 802 Millimeter --> 0.802 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
h = (s*pt)/1.52 --> (0.00454*0.802)/1.52
Evaluating ... ...
h = 0.00239544736842105
STEP 3: Convert Result to Output's Unit
0.00239544736842105 Meter -->2.39544736842105 Millimeter (Check conversion here)
FINAL ANSWER
2.39544736842105 2.395447 Millimeter <-- Length of Fillet Leg
(Calculation completed in 00.020 seconds)

Credits

Created by Rajat Vishwakarma
University Institute of Technology RGPV (UIT - RGPV), Bhopal
Rajat Vishwakarma has created this Calculator and 400+ more calculators!
Verified by Nishan Poojary
Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi
Nishan Poojary has verified this Calculator and 400+ more calculators!

3 Lap Joint with Fillets Calculators

Length of fillet leg in Lap joints from shrinkage
Go Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness)/1.52
Transverse shrinkage in Lap Joint with Fillets
Go Transverse Shrinkage = (1.52*Length of Fillet Leg)/Plate Thickness
Thickness of plates in Lap joints
Go Plate Thickness = (1.52*Length of Fillet Leg)/Transverse Shrinkage

Length of fillet leg in Lap joints from shrinkage Formula

Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness)/1.52
h = (s*pt)/1.52

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Length of fillet leg in Lap joints from shrinkage?

Length of fillet leg in Lap joints from shrinkage calculator uses Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness)/1.52 to calculate the Length of Fillet Leg, The Length of fillet leg in Lap joints from shrinkage formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. . Length of Fillet Leg is denoted by h symbol.

How to calculate Length of fillet leg in Lap joints from shrinkage using this online calculator? To use this online calculator for Length of fillet leg in Lap joints from shrinkage, enter Transverse Shrinkage (s) & Plate Thickness (pt) and hit the calculate button. Here is how the Length of fillet leg in Lap joints from shrinkage calculation can be explained with given input values -> 2395.447 = (0.00454*0.802)/1.52.

FAQ

What is Length of fillet leg in Lap joints from shrinkage?
The Length of fillet leg in Lap joints from shrinkage formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. and is represented as h = (s*pt)/1.52 or Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness)/1.52. Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal & Plate Thickness is the distance through the bearing plate.
How to calculate Length of fillet leg in Lap joints from shrinkage?
The Length of fillet leg in Lap joints from shrinkage formula is defined as the length of corner of a joint made of two pieces placed at approximately 90 degrees to each other. is calculated using Length of Fillet Leg = (Transverse Shrinkage*Plate Thickness)/1.52. To calculate Length of fillet leg in Lap joints from shrinkage, you need Transverse Shrinkage (s) & Plate Thickness (pt). With our tool, you need to enter the respective value for Transverse Shrinkage & Plate Thickness and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!