Maximum Angular Distortion of Fillet Welds Calculator

✖Angular change in restrained joints is the angles introduced by wavy distortions due to restrictions on fillet welds.ⓘ Angular Change in Restrained Joints [φ]			+10% -10%
✖Length of span of the fillet welds is the distance between two consecutive fillet welds.ⓘ Length of Span of the Fillet Welds [L]			+10% -10%

✖Maximum distortion is the maximum deformation of fillet weld possible in restricted position.ⓘ Maximum Angular Distortion of Fillet Welds [δ_max]

⎘ Copy

👎

Formula

✖

Maximum Angular Distortion of Fillet Welds

Formula

`"δ"_{"max"} = 0.25*"φ"*"L"`

Example

`"1.5mm"=0.25*"1.2rad"*"5mm"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Maximum Angular Distortion of Fillet Welds Solution

STEP 0: Pre-Calculation Summary

Formula Used

Maximum Distortion = 0.25*Angular Change in Restrained Joints*Length of Span of the Fillet Welds
δ_max = 0.25*φ*L
This formula uses 3 Variables

Variables Used

Maximum Distortion - (Measured in Meter) - Maximum distortion is the maximum deformation of fillet weld possible in restricted position.
Angular Change in Restrained Joints - (Measured in Radian) - Angular change in restrained joints is the angles introduced by wavy distortions due to restrictions on fillet welds.
Length of Span of the Fillet Welds - (Measured in Meter) - Length of span of the fillet welds is the distance between two consecutive fillet welds.

STEP 1: Convert Input(s) to Base Unit

Angular Change in Restrained Joints: 1.2 Radian --> 1.2 Radian No Conversion Required
Length of Span of the Fillet Welds: 5 Millimeter --> 0.005 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

δ_max = 0.25*φ*L --> 0.25*1.2*0.005

Evaluating ... ...

δ_max = 0.0015

STEP 3: Convert Result to Output's Unit

0.0015 Meter -->1.5 Millimeter (Check conversion here)

FINAL ANSWER

1.5 Millimeter <-- Maximum Distortion

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Welding » Distortion in Weldments » Angular Distortion » Maximum Angular Distortion of Fillet Welds

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< 5 Angular Distortion Calculators

Angular Distortion at x of Fillet Welds

Go Distortion at x Distance = Length of Span of the Fillet Welds*(0.25*Angular Change in Restrained Joints-Angular Change in Restrained Joints*((Distance from the Center Line of the Frame/Length of Span of the Fillet Welds)-0.5)^2)

Rigidity of fillet welds

Go Rigidity of Fillet Weld = (Young's Modulus*Plate Thickness^3)/(12+(1-Poisson's Ratio^2))

Angular change when there is maximum distortion of fillet welds

Go Angular Change in Restrained Joints = Maximum Distortion/(0.25*Length of Span of the Fillet Welds)

Length of span for maximum angular distortion of fillet welds

Go Length of Span of the Fillet Welds = Maximum Distortion/(0.25*Angular Change in Restrained Joints)

Maximum Angular Distortion of Fillet Welds

Go Maximum Distortion = 0.25*Angular Change in Restrained Joints*Length of Span of the Fillet Welds

Maximum Angular Distortion of Fillet Welds Formula

Maximum Distortion = 0.25*Angular Change in Restrained Joints*Length of Span of the Fillet Welds
δ_max = 0.25*φ*L

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.
(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Maximum Angular Distortion of Fillet Welds?

Maximum Angular Distortion of Fillet Welds calculator uses Maximum Distortion = 0.25*Angular Change in Restrained Joints*Length of Span of the Fillet Welds to calculate the Maximum Distortion, The Maximum Angular Distortion of Fillet Welds formula is defined as the maximum deformation of fillet weld possible in restricted position. Maximum Distortion is denoted by δ_max symbol.

How to calculate Maximum Angular Distortion of Fillet Welds using this online calculator? To use this online calculator for Maximum Angular Distortion of Fillet Welds, enter Angular Change in Restrained Joints (φ) & Length of Span of the Fillet Welds (L) and hit the calculate button. Here is how the Maximum Angular Distortion of Fillet Welds calculation can be explained with given input values -> 31250 = 0.25*1.2*0.005.

FAQ

What is Maximum Angular Distortion of Fillet Welds?

The Maximum Angular Distortion of Fillet Welds formula is defined as the maximum deformation of fillet weld possible in restricted position and is represented as δ_max = 0.25*φ*L or Maximum Distortion = 0.25*Angular Change in Restrained Joints*Length of Span of the Fillet Welds. Angular change in restrained joints is the angles introduced by wavy distortions due to restrictions on fillet welds & Length of span of the fillet welds is the distance between two consecutive fillet welds.

How to calculate Maximum Angular Distortion of Fillet Welds?

The Maximum Angular Distortion of Fillet Welds formula is defined as the maximum deformation of fillet weld possible in restricted position is calculated using Maximum Distortion = 0.25*Angular Change in Restrained Joints*Length of Span of the Fillet Welds. To calculate Maximum Angular Distortion of Fillet Welds, you need Angular Change in Restrained Joints (φ) & Length of Span of the Fillet Welds (L). With our tool, you need to enter the respective value for Angular Change in Restrained Joints & Length of Span of the Fillet Welds and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search