Output Torque or Resisting or Load Torque on Driven Member Solution

STEP 0: Pre-Calculation Summary
Formula Used
Output Torque or Load Torque on Driven Member = -Input Torque on Driving Member*Angular Speed of Driving Member/Angular Speed of Driven Member
T2 = -T1*ω1/ω2
This formula uses 4 Variables
Variables Used
Output Torque or Load Torque on Driven Member - (Measured in Newton Meter) - Output Torque or Load Torque on Driven Member is the measure of the force that can cause an object to rotate about an axis.
Input Torque on Driving Member - (Measured in Newton Meter) - Input Torque on Driving Member is the measure of the force that can cause an object to rotate about an axis.
Angular Speed of Driving Member - (Measured in Radian per Second) - Angular Speed of Driving Member is the speed of the object in rotational motion.
Angular Speed of Driven Member - (Measured in Radian per Second) - Angular Speed of Driven Member is the rate at which it rotates, determined by the speed of the driving member and the gear ratio between the two.
STEP 1: Convert Input(s) to Base Unit
Input Torque on Driving Member: 17 Newton Meter --> 17 Newton Meter No Conversion Required
Angular Speed of Driving Member: 95.492966 Revolution per Minute --> 10.0000000146608 Radian per Second (Check conversion ​here)
Angular Speed of Driven Member: 54.1 Revolution per Minute --> 5.6653387516851 Radian per Second (Check conversion ​here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
T2 = -T112 --> -17*10.0000000146608/5.6653387516851
Evaluating ... ...
T2 = -30.0070318299446
STEP 3: Convert Result to Output's Unit
-30.0070318299446 Newton Meter --> No Conversion Required
FINAL ANSWER
-30.0070318299446 -30.007032 Newton Meter <-- Output Torque or Load Torque on Driven Member
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

Gear Trains Calculators

Speed Ratio of Compound Gear Train
​ Go Velocity Ratio = Product of Number of Teeth on Driven/Product of Number of Teeth on Drivers
Train Value given Number of Teeth
​ Go Train Value = Number of Teeth on Driver/Number of Teeth on Driven
Train Value of Compound Gear Train given Speed of Driven and Driver Gear
​ Go Train Value = Speed of Last Driven Pulley/Speed of First Driver
Train Value given Speed of Follower and Driver
​ Go Train Value = Speed of Follower/Speed of Driver

Output Torque or Resisting or Load Torque on Driven Member Formula

Output Torque or Load Torque on Driven Member = -Input Torque on Driving Member*Angular Speed of Driving Member/Angular Speed of Driven Member
T2 = -T1*ω1/ω2

What is output torque?

Torque forms part of the basic specification of an engine. For output torque, the power output of an engine is expressed as its torque multiplied by its rotational speed of the axis. Internal-combustion engines produce useful torque only over a limited range of rotational speeds (typically from around 1,000–6,000 rpm for a small car).

How to Calculate Output Torque or Resisting or Load Torque on Driven Member?

Output Torque or Resisting or Load Torque on Driven Member calculator uses Output Torque or Load Torque on Driven Member = -Input Torque on Driving Member*Angular Speed of Driving Member/Angular Speed of Driven Member to calculate the Output Torque or Load Torque on Driven Member, Output Torque or Resisting or Load Torque on Driven Member is the torque that the driven gear exerts in response to the input torque applied to the driving gear. It can be calculated by multiplying the input torque by the speed ratio of the gear train, reflecting how the input power is transformed through the gearing system. This torque is essential in determining the performance of the driven member under load conditions. Output Torque or Load Torque on Driven Member is denoted by T2 symbol.

How to calculate Output Torque or Resisting or Load Torque on Driven Member using this online calculator? To use this online calculator for Output Torque or Resisting or Load Torque on Driven Member, enter Input Torque on Driving Member (T1), Angular Speed of Driving Member 1) & Angular Speed of Driven Member 2) and hit the calculate button. Here is how the Output Torque or Resisting or Load Torque on Driven Member calculation can be explained with given input values -> -30.007032 = -17*10.0000000146608/5.6653387516851.

FAQ

What is Output Torque or Resisting or Load Torque on Driven Member?
Output Torque or Resisting or Load Torque on Driven Member is the torque that the driven gear exerts in response to the input torque applied to the driving gear. It can be calculated by multiplying the input torque by the speed ratio of the gear train, reflecting how the input power is transformed through the gearing system. This torque is essential in determining the performance of the driven member under load conditions and is represented as T2 = -T112 or Output Torque or Load Torque on Driven Member = -Input Torque on Driving Member*Angular Speed of Driving Member/Angular Speed of Driven Member. Input Torque on Driving Member is the measure of the force that can cause an object to rotate about an axis, Angular Speed of Driving Member is the speed of the object in rotational motion & Angular Speed of Driven Member is the rate at which it rotates, determined by the speed of the driving member and the gear ratio between the two.
How to calculate Output Torque or Resisting or Load Torque on Driven Member?
Output Torque or Resisting or Load Torque on Driven Member is the torque that the driven gear exerts in response to the input torque applied to the driving gear. It can be calculated by multiplying the input torque by the speed ratio of the gear train, reflecting how the input power is transformed through the gearing system. This torque is essential in determining the performance of the driven member under load conditions is calculated using Output Torque or Load Torque on Driven Member = -Input Torque on Driving Member*Angular Speed of Driving Member/Angular Speed of Driven Member. To calculate Output Torque or Resisting or Load Torque on Driven Member, you need Input Torque on Driving Member (T1), Angular Speed of Driving Member 1) & Angular Speed of Driven Member 2). With our tool, you need to enter the respective value for Input Torque on Driving Member, Angular Speed of Driving Member & Angular Speed of Driven Member and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Output Torque or Load Torque on Driven Member?
In this formula, Output Torque or Load Torque on Driven Member uses Input Torque on Driving Member, Angular Speed of Driving Member & Angular Speed of Driven Member. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Output Torque or Load Torque on Driven Member = Input Torque on Driving Member*Angular Speed of Driving Member in RPM/Angular Speed of Driven Member in RPM
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!