Credits

Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 500+ more calculators!
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1000+ more calculators!

Pitch When Tooth Side Radius is Given Solution

STEP 0: Pre-Calculation Summary
Formula Used
pitch = 1*Tooth Side Radius
P = 1*rx
This formula uses 1 Variables
Variables Used
Tooth Side Radius - Tooth Side Radius is simply the radius of the tooth or numerically equivalent to pitch. (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
Tooth Side Radius: 10 Millimeter --> 0.01 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
P = 1*rx --> 1*0.01
Evaluating ... ...
P = 0.01
STEP 3: Convert Result to Output's Unit
0.01 Meter --> No Conversion Required
FINAL ANSWER
0.01 Meter <-- Pitch
(Calculation completed in 00.007 seconds)

10+ Design of Chain Drives Calculators

Number of Teeth on the Sprocket When Pitch Circle Diameter is Given
number_of_teeth = 180*(pi/180)*asin(Pitch Circle Diameter/Pitch) Go
Velocity Ratio of the Chain Drives
velocity_ratio = Angular speed of the driving member in rpm/Angular speed of the driven member in rpm Go
Number of Teeth on the Driven Sprocket When Velocity of the Chain Drives is Given
number_of_teeth_on_driven_sprocket = Number of Teeth on Driving Sprocket*Velocity ratio Go
Number of Teeth on Driving Sprocket When Velocity of the Chain Drives is Given
number_of_teeth_on_driving_sprocket = Number of Teeth on Driven Sprocket/Velocity ratio Go
Speed of Rotation of the Driving Shaft When Velocity Ratio of the Chain Drives is Given
angular_speed_driving_rpm = Velocity ratio*Angular speed of the driven member in rpm Go
Speed of Rotation of the Driven Shaft When Velocity Ratio of the Chain Drives is Given
angular_speed_driven_rpm = Angular speed of the driving member in rpm/Velocity ratio Go
Length of the Pitch When Pitch Circle Diameter is Given
pitch = Pitch Circle Diameter*sin(180/Number of teeth) Go
Pitch Circle Diameter in terms of Pitch
pitch_circle_diameter = Pitch/sin(180/Number of teeth) Go
Pitch Angle of the Sprocket
pitch_angle = 2*3.14/Number of teeth Go
Number of Teeth on the Sprocket When Pitch Angle of the Sprocket is Given
number_of_teeth = 360/Pitch Angle Go

Pitch When Tooth Side Radius is Given Formula

pitch = 1*Tooth Side Radius
P = 1*rx

Define a Sprocket?

A sprocket, sprocket-wheel, or chainwheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track, or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which radial projections engage a chain passing over it.

How to Calculate Pitch When Tooth Side Radius is Given?

Pitch When Tooth Side Radius is Given calculator uses pitch = 1*Tooth Side Radius to calculate the Pitch, The Pitch When Tooth Side Radius is Given formula is defined as the distance between links, as measured from the center of the roller pin on one link to the center of the roller pin on the next link. Pitch and is denoted by P symbol.

How to calculate Pitch When Tooth Side Radius is Given using this online calculator? To use this online calculator for Pitch When Tooth Side Radius is Given, enter Tooth Side Radius (rx) and hit the calculate button. Here is how the Pitch When Tooth Side Radius is Given calculation can be explained with given input values -> 0.01 = 1*0.01.

FAQ

What is Pitch When Tooth Side Radius is Given?
The Pitch When Tooth Side Radius is Given formula is defined as the distance between links, as measured from the center of the roller pin on one link to the center of the roller pin on the next link and is represented as P = 1*rx or pitch = 1*Tooth Side Radius. Tooth Side Radius is simply the radius of the tooth or numerically equivalent to pitch.
How to calculate Pitch When Tooth Side Radius is Given?
The Pitch When Tooth Side Radius is Given formula is defined as the distance between links, as measured from the center of the roller pin on one link to the center of the roller pin on the next link is calculated using pitch = 1*Tooth Side Radius. To calculate Pitch When Tooth Side Radius is Given, you need Tooth Side Radius (rx). With our tool, you need to enter the respective value for Tooth Side Radius and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Pitch?
In this formula, Pitch uses Tooth Side Radius. We can use 10 other way(s) to calculate the same, which is/are as follows -
  • pitch_angle = 2*3.14/Number of teeth
  • number_of_teeth = 360/Pitch Angle
  • pitch_circle_diameter = Pitch/sin(180/Number of teeth)
  • pitch = Pitch Circle Diameter*sin(180/Number of teeth)
  • number_of_teeth = 180*(pi/180)*asin(Pitch Circle Diameter/Pitch)
  • velocity_ratio = Angular speed of the driving member in rpm/Angular speed of the driven member in rpm
  • angular_speed_driving_rpm = Velocity ratio*Angular speed of the driven member in rpm
  • angular_speed_driven_rpm = Angular speed of the driving member in rpm/Velocity ratio
  • number_of_teeth_on_driving_sprocket = Number of Teeth on Driven Sprocket/Velocity ratio
  • number_of_teeth_on_driven_sprocket = Number of Teeth on Driving Sprocket*Velocity ratio
Where is the Pitch When Tooth Side Radius is Given calculator used?
Among many, Pitch When Tooth Side Radius is Given calculator is widely used in real life applications like {FormulaUses}. Here are few more real life examples -
{FormulaExamplesList}
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!