Plate thickness for given transverse shrinkage in butt joints Calculator

✖Cross‑sectional Area of Weld is the area of region where welding is being done.ⓘ Cross‑Sectional Area of Weld [A_w]			+10% -10%
✖Transverse Shrinkage of Butt Joint is a shrinkage of the metal result of contraction of the base metal.ⓘ Transverse Shrinkage of Butt Joint [S_b]			+10% -10%
✖Root Opening is defined as the point at which the two pieces to be joined by welding is nearest.ⓘ Root Opening [d]			+10% -10%

✖Plate Thickness in butt joint is the distance through the bearing plate.ⓘ Plate thickness for given transverse shrinkage in butt joints [p_tb]

⎘ Copy

👎

Formula

✖

Plate thickness for given transverse shrinkage in butt joints

Formula

`"p"_{"tb"} = (5.08*"A"_{"w"})/("S"_{"b"}-(1.27*"d"))`

Example

`"802.8736mm"=(5.08*"5.5mm²")/("0.365mm"-(1.27*"0.26mm"))`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Plate thickness for given transverse shrinkage in butt joints Solution

STEP 0: Pre-Calculation Summary

Formula Used

Plate Thickness in Butt joint = (5.08*Cross‑Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening))
p_tb = (5.08*A_w)/(S_b-(1.27*d))
This formula uses 4 Variables

Variables Used

Plate Thickness in Butt joint - (Measured in Meter) - Plate Thickness in butt joint is the distance through the bearing plate.
Cross‑Sectional Area of Weld - (Measured in Square Meter) - Cross‑sectional Area of Weld is the area of region where welding is being done.
Transverse Shrinkage of Butt Joint - (Measured in Meter) - Transverse Shrinkage of Butt Joint is a shrinkage of the metal result of contraction of the base metal.
Root Opening - (Measured in Meter) - Root Opening is defined as the point at which the two pieces to be joined by welding is nearest.

STEP 1: Convert Input(s) to Base Unit

Cross‑Sectional Area of Weld: 5.5 Square Millimeter --> 5.5E-06 Square Meter (Check conversion here)
Transverse Shrinkage of Butt Joint: 0.365 Millimeter --> 0.000365 Meter (Check conversion here)
Root Opening: 0.26 Millimeter --> 0.00026 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

p_tb = (5.08*A_w)/(S_b-(1.27*d)) --> (5.08*5.5E-06)/(0.000365-(1.27*0.00026))

Evaluating ... ...

p_tb = 0.80287356321839

STEP 3: Convert Result to Output's Unit

0.80287356321839 Meter -->802.87356321839 Millimeter (Check conversion here)

FINAL ANSWER

802.87356321839 ≈ 802.8736 Millimeter <-- Plate Thickness in Butt joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Welding » Distortion in Weldments » Transverse Shrinkage in Joints » Butt Joints » Plate thickness for given transverse shrinkage in butt joints

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Nishan Poojary

Shri Madhwa Vadiraja Institute of Technology and Management (SMVITM), Udupi

Nishan Poojary has verified this Calculator and 400+ more calculators!

< 14 Butt Joints Calculators

Total transverse shrinkage during multi-pass welding of butt joint

Go Total Transverse Shrinkage = Transverse Shrinkage in First Pass+Constant for Multi-Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass))

Transverse Shrinkage in First Pass given Total Shrinkage

Go Transverse Shrinkage in First Pass = Total Transverse Shrinkage-Constant for Multi-Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass))

Metal Deposited in First Pass of Welding given Transverse Shrinkage

Go Weld Metal Deposited in First Pass = Total Weight of Weld Metal Deposited/(10^((Total Transverse Shrinkage-Transverse Shrinkage in First Pass)/Constant for Multi-Pass Shrinkage))

Total Metal Deposited in Weld given Total Transverse Shrinkage

Go Total Weight of Weld Metal Deposited = Weld Metal Deposited in First Pass*(10^((Total Transverse Shrinkage-Transverse Shrinkage in First Pass)/Constant for Multi-Pass Shrinkage))

Plate thickness for given transverse shrinkage in butt joints

Go Plate Thickness in Butt joint = (5.08*Cross‑Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening))

Transverse Shrinkage in Butt Joints

Go Transverse Shrinkage of Butt Joint = (5.08*(Cross‑Sectional Area of Weld/Plate Thickness in Butt joint))+(1.27*Root Opening)

Cross-sectional area of weld for given transverse shrinkage in butt joints

Go Cross‑Sectional Area of Weld = (Plate Thickness in Butt joint*(Transverse Shrinkage of Butt Joint-1.27*Root Opening))/5.08

Root Opening given Transverse Shrinkage

Go Root Opening = (Transverse Shrinkage of Butt Joint-5.08*(Cross‑Sectional Area of Weld/Plate Thickness in Butt joint))/1.27

Degree of restraint (Butt joints)

Go Degree of Restraint = ((1000/86)*((Transverse Shrinkage of Unrestrained Joint/Transverse Shrinkage of Restrained Joint)-1))^(1/0.87)

Shrinkage of unrestrained joint from given shrinkage of restrained Butt joint

Go Transverse Shrinkage of Unrestrained Joint = Transverse Shrinkage of Restrained Joint*(1+0.086*Degree of Restraint^0.87)

Transverse shrinkage of restrained joint

Go Transverse Shrinkage of Restrained Joint = Transverse Shrinkage of Unrestrained Joint/(1+0.086*Degree of Restraint^0.87)

Depth of first V-groove for minimum distortion of Butt joint

Go Depth of the First V‑Groove = (0.62*Depth of the Last V‑groove+0.12*Depth of Root Face)/0.38

Depth of last V-groove for minimum distortion of Butt joint

Go Depth of the Last V‑groove = (0.38*Depth of the First V‑Groove-0.12*Depth of Root Face)/0.62

Depth of root face for minimum distortion of Butt joint

Go Depth of Root Face = (0.38*Depth of the First V‑Groove-0.62*Depth of the Last V‑groove)/0.12

Plate thickness for given transverse shrinkage in butt joints Formula

Plate Thickness in Butt joint = (5.08*Cross‑Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening))
p_tb = (5.08*A_w)/(S_b-(1.27*d))

What is called Distortion in welding terms ?

One of the major problems found with weldments is the distortion. Distortion is caused mainly because of the shrinkage that take place in weldments. The shrinkage taking place in a weldment depends upon the geometry and type of the weld. There are three types of distortions possible in weldments.

(a) Transverse shrinkage occurring perpendicular to the weld line.
(b) Longitudinal shrinkage occurring parallel to the weld line, which is very small of the order of about 0.1% of the weld length and hence can be neglected.
(c) Angular change as a rotation about the weld line.

How to Calculate Plate thickness for given transverse shrinkage in butt joints?

Plate thickness for given transverse shrinkage in butt joints calculator uses Plate Thickness in Butt joint = (5.08*Cross‑Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening)) to calculate the Plate Thickness in Butt joint, The Plate thickness for given transverse shrinkage in butt joints formula is defined as that plate thickness which results in given shrinkage of butt joint. Plate Thickness in Butt joint is denoted by p_tb symbol.

How to calculate Plate thickness for given transverse shrinkage in butt joints using this online calculator? To use this online calculator for Plate thickness for given transverse shrinkage in butt joints, enter Cross‑Sectional Area of Weld (A_w), Transverse Shrinkage of Butt Joint (S_b) & Root Opening (d) and hit the calculate button. Here is how the Plate thickness for given transverse shrinkage in butt joints calculation can be explained with given input values -> 802873.6 = (5.08*5.5E-06)/(0.000365-(1.27*0.00026)).

FAQ

What is Plate thickness for given transverse shrinkage in butt joints?

The Plate thickness for given transverse shrinkage in butt joints formula is defined as that plate thickness which results in given shrinkage of butt joint and is represented as p_tb = (5.08*A_w)/(S_b-(1.27*d)) or Plate Thickness in Butt joint = (5.08*Cross‑Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening)). Cross‑sectional Area of Weld is the area of region where welding is being done, Transverse Shrinkage of Butt Joint is a shrinkage of the metal result of contraction of the base metal & Root Opening is defined as the point at which the two pieces to be joined by welding is nearest.

How to calculate Plate thickness for given transverse shrinkage in butt joints?

The Plate thickness for given transverse shrinkage in butt joints formula is defined as that plate thickness which results in given shrinkage of butt joint is calculated using Plate Thickness in Butt joint = (5.08*Cross‑Sectional Area of Weld)/(Transverse Shrinkage of Butt Joint-(1.27*Root Opening)). To calculate Plate thickness for given transverse shrinkage in butt joints, you need Cross‑Sectional Area of Weld (A_w), Transverse Shrinkage of Butt Joint (S_b) & Root Opening (d). With our tool, you need to enter the respective value for Cross‑Sectional Area of Weld, Transverse Shrinkage of Butt Joint & Root Opening and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search