Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickess of Eye of Knuckle Joint [b]			+10% -10%
✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint [d_o]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.ⓘ Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness [τ_eye]

⎘ Copy

👎

Formula

✖

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Formula

`"τ"_{"eye"} = "L"/("b"*("d"_{"o"}-"d"))`

Example

`"29.06977N/mm²"="50000N"/("40mm"*("80mm"-"37mm"))`

Calculator

LaTeX

Reset

👍

Download Eye Formulas PDF

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness Solution

STEP 0: Pre-Calculation Summary

Formula Used

Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
τ_eye = L/(b*(d_o-d))
This formula uses 5 Variables

Variables Used

Shear Stress in Eye of Knuckle Joint - (Measured in Pascal) - Shear Stress in Eye of Knuckle Joint is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

τ_eye = L/(b*(d_o-d)) --> 50000/(0.04*(0.08-0.037))

Evaluating ... ...

τ_eye = 29069767.4418605

STEP 3: Convert Result to Output's Unit

29069767.4418605 Pascal -->29.0697674418605 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

29.0697674418605 ≈ 29.06977 Newton per Square Millimeter <-- Shear Stress in Eye of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Eye » Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Ravi Khiyani

Shri Govindram Seksaria Institute of Technology and Science (SGSITS), Indore

Ravi Khiyani has verified this Calculator and 300+ more calculators!

< 16 Eye Calculators

Bending Stress in Knuckle Pin given Load, Thickness of Eyes and Pin Diameter

Go Bending Stress in Knuckle Pin = (32*Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3))/(pi*Diameter of Knuckle Pin^3)

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin

Go Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Go Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Shear Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Go Shear Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Go Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye

Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Go Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Eye End of Knuckle Joint given Shear Stress in Eye

Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork

Go Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)

Thickness of Eye End of Knuckle Joint given Bending Moment in Pin

Go Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Bending Stress in Knuckle Pin given Bending Moment in Pin

Go Bending Stress in Knuckle Pin = (32*Bending Moment in Knuckle Pin)/(pi*Diameter of Knuckle Pin^3)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Thickness of Eye of Knuckle Joint given Rod Diameter

Go Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness Formula

Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
τ_eye = L/(b*(d_o-d))

Parts of the knuckle joint

A knuckle joint always has a fork end, an eye end, and a pin. Typically, these are all specially made parts although standard rod ends are sometimes used for the eye end. This has the advantage that a rod end allows some additional rotational movement perpendicular to the pin axis, providing further protection against bending stress.
Various types of pins can also be used. The most common is a special pin with a shoulder at one end and a cross hole at the other to accept a collar and split pint. For large structures, such as bridges, cold rivets were historically used. The pivot may also be bolted.

How to Calculate Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness?

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness calculator uses Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Shear Stress in Eye of Knuckle Joint, The Shear stress in eye of knuckle joint given load, outer diameter of eye and its thickness is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area. Shear Stress in Eye of Knuckle Joint is denoted by τ_eye symbol.

How to calculate Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness using this online calculator? To use this online calculator for Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness, enter Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness calculation can be explained with given input values -> 2.9E-5 = 50000/(0.04*(0.08-0.037)).

FAQ

What is Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness?

The Shear stress in eye of knuckle joint given load, outer diameter of eye and its thickness is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area and is represented as τ_eye = L/(b*(d_o-d)) or Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness?

The Shear stress in eye of knuckle joint given load, outer diameter of eye and its thickness is the amount of shear stress induced into the eye of the knuckle joint which tends to fail the eye in shearing parallel to the force acting area is calculated using Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness, you need Load on Knuckle Joint (L), Thickess of Eye of Knuckle Joint (b), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Thickess of Eye of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search