Sludge Volume-out given Percent Reduction in Sludge Volume Solution

STEP 0: Pre-Calculation Summary
Formula Used
Sludge Volume Out = Sludge Volume in*(1-Volume Reduction)
Vo = Vi*(1-%V)
This formula uses 3 Variables
Variables Used
Sludge Volume Out - (Measured in Cubic Meter) - Sludge Volume Out is the volume of sludge leaving the filter unit.
Sludge Volume in - (Measured in Cubic Meter) - Sludge Volume in means the volume of sludge entering the filter unit.
Volume Reduction - Volume Reduction is defined as the change in the volume from initial to final. Volume reduction percent is expressed in decimal.
STEP 1: Convert Input(s) to Base Unit
Sludge Volume in: 28 Cubic Meter --> 28 Cubic Meter No Conversion Required
Volume Reduction: 0.214 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
Vo = Vi*(1-%V) --> 28*(1-0.214)
Evaluating ... ...
Vo = 22.008
STEP 3: Convert Result to Output's Unit
22.008 Cubic Meter --> No Conversion Required
FINAL ANSWER
22.008 Cubic Meter <-- Sludge Volume Out
(Calculation completed in 00.004 seconds)

Credits

Created by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has created this Calculator and 2200+ more calculators!
Verified by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has verified this Calculator and 2600+ more calculators!

9 Sludge Volume and Feed Rate Calculators

Percent Reduction in Sludge Volume
Go Volume Reduction = (Sludge Volume in-Sludge Volume Out)/Sludge Volume in
Solids Recovery given Dewatered Sludge Discharge Rate
Go Solid Recovery in Decimal = (Cake Discharge Rate/Sludge Feed Rate)
Dewatered Sludge or Cake Discharge Rate
Go Cake Discharge Rate = (Sludge Feed Rate*Solid Recovery in Decimal)
Sludge Feed Rate using Dewatered Sludge Discharge Rate
Go Sludge Feed Rate = Cake Discharge Rate/Solid Recovery in Decimal
Digested Sludge using Sludge Feed Rate for Dewatering Facility
Go Digested Sludge = (Volumetric Sludge Feed Rate*Operation Time)
Operation Time given Sludge Feed Rate for Dewatering Facility
Go Operation Time = (Digested Sludge/Volumetric Sludge Feed Rate)
Sludge Feed Rate for Dewatering Facility
Go Volumetric Sludge Feed Rate = (Digested Sludge/Operation Time)
Sludge Volume-in given Percent Reduction in Sludge Volume
Go Sludge Volume in = (Sludge Volume Out/(1-Volume Reduction))
Sludge Volume-out given Percent Reduction in Sludge Volume
Go Sludge Volume Out = Sludge Volume in*(1-Volume Reduction)

Sludge Volume-out given Percent Reduction in Sludge Volume Formula

Sludge Volume Out = Sludge Volume in*(1-Volume Reduction)
Vo = Vi*(1-%V)

What is sludge ?

Sludge is a semi-solid slurry that can be produced from a range of industrial processes, from water treatment, wastewater treatment or on-site sanitation systems.Industrial wastewater treatment plants produce solids that are also referred to as sludge.

How to Calculate Sludge Volume-out given Percent Reduction in Sludge Volume?

Sludge Volume-out given Percent Reduction in Sludge Volume calculator uses Sludge Volume Out = Sludge Volume in*(1-Volume Reduction) to calculate the Sludge Volume Out, The Sludge Volume-out given Percent Reduction in Sludge Volume calculates the sludge volume out when we have prior information of sludge volume in and volume reduction. Sludge Volume Out is denoted by Vo symbol.

How to calculate Sludge Volume-out given Percent Reduction in Sludge Volume using this online calculator? To use this online calculator for Sludge Volume-out given Percent Reduction in Sludge Volume, enter Sludge Volume in (Vi) & Volume Reduction (%V) and hit the calculate button. Here is how the Sludge Volume-out given Percent Reduction in Sludge Volume calculation can be explained with given input values -> 12.32 = 28*(1-0.214).

FAQ

What is Sludge Volume-out given Percent Reduction in Sludge Volume?
The Sludge Volume-out given Percent Reduction in Sludge Volume calculates the sludge volume out when we have prior information of sludge volume in and volume reduction and is represented as Vo = Vi*(1-%V) or Sludge Volume Out = Sludge Volume in*(1-Volume Reduction). Sludge Volume in means the volume of sludge entering the filter unit & Volume Reduction is defined as the change in the volume from initial to final. Volume reduction percent is expressed in decimal.
How to calculate Sludge Volume-out given Percent Reduction in Sludge Volume?
The Sludge Volume-out given Percent Reduction in Sludge Volume calculates the sludge volume out when we have prior information of sludge volume in and volume reduction is calculated using Sludge Volume Out = Sludge Volume in*(1-Volume Reduction). To calculate Sludge Volume-out given Percent Reduction in Sludge Volume, you need Sludge Volume in (Vi) & Volume Reduction (%V). With our tool, you need to enter the respective value for Sludge Volume in & Volume Reduction and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!