Smallest diameter of hole given empirical constant Calculator

✖Taper produced in EDM is the taper produced due to side sparks during EDM.ⓘ Taper Produced in EDM [T_sd]			+10% -10%
✖Empirical constant is defined as the constant used to calculate the Taper produced during EDM due to side sparks.ⓘ Empirical Constant [K_T]			+10% -10%

✖The smaller diameter is the smaller of all diameters of a given object.ⓘ Smallest diameter of hole given empirical constant [d]

⎘ Copy

👎

Formula

✖

Smallest diameter of hole given empirical constant

Formula

`"d" = sqrt("T"_{"sd"}/"K"_{"T"})`

Example

`"1.200384m"=sqrt("0.2"/"0.1388")`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF

Smallest diameter of hole given empirical constant Solution

STEP 0: Pre-Calculation Summary

Formula Used

Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant)
d = sqrt(T_sd/K_T)
This formula uses 1 Functions, 3 Variables

Functions Used

sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)

Variables Used

Smaller Diameter - (Measured in Meter) - The smaller diameter is the smaller of all diameters of a given object.
Taper Produced in EDM - Taper produced in EDM is the taper produced due to side sparks during EDM.
Empirical Constant - Empirical constant is defined as the constant used to calculate the Taper produced during EDM due to side sparks.

STEP 1: Convert Input(s) to Base Unit

Taper Produced in EDM: 0.2 --> No Conversion Required
Empirical Constant: 0.1388 --> No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

d = sqrt(T_sd/K_T) --> sqrt(0.2/0.1388)

Evaluating ... ...

d = 1.20038418441836

STEP 3: Convert Result to Output's Unit

1.20038418441836 Meter --> No Conversion Required

FINAL ANSWER

1.20038418441836 ≈ 1.200384 Meter <-- Smaller Diameter

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Unconventional machining processes » Electro Discharge Machining (EDM) » Possible surface defects in EDM » Taper Formation » Smallest diameter of hole given empirical constant

Credits

Created by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has created this Calculator and 400+ more calculators!

Verified by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has verified this Calculator and 200+ more calculators!

< 9 Taper Formation Calculators

Volume of crater made by electric spark

Go Volume of Crater = (pi/12)*Depth of Machined Surface*((Smaller Diameter^2)+(Larger Diameter^2)+(Larger Diameter*Smaller Diameter))

Empirical constant for taper

Go Empirical Constant = (Larger Diameter-Smaller Diameter)/(2*Depth of Machined Surface*Smaller Diameter^2)

Depth of machined surface

Go Depth of Machined Surface = (Larger Diameter-Smaller Diameter)/(2*Empirical Constant*Smaller Diameter^2)

Upper diameter of hole

Go Larger Diameter = 2*Depth of Machined Surface*Empirical Constant*Smaller Diameter^2+Smaller Diameter

Depth of machined surface given taper

Go Depth of Machined Surface = (Larger Diameter-Smaller Diameter)/(2*Taper Produced in EDM)

Smaller diameter of crater given Taper

Go Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM

Largest size of hole given taper

Go Larger Diameter = 2*Depth of Machined Surface*Taper Produced in EDM+Smaller Diameter

Smallest diameter of hole given empirical constant

Go Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant)

Taper produced due to side sparks

Go Taper Produced in EDM = Empirical Constant*Smaller Diameter^2

Smallest diameter of hole given empirical constant Formula

Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant)
d = sqrt(T_sd/K_T)

What factors affects surface finish during EDM?

The amount of material removed and the surface finish produced is dependent upon the current in the spark. The material removed by the spark can be assumed to be a crater. The amount removed therefore will depend upon the crater depth, which is directly proportional to the current. Thus as the material removed increases and at the same time, the surface finish also decreases. However, decreasing the current in the spark, but increasing its frequency will improve the surface finish in view of the small crater size, but at the same time, the material removal rate can be maintained by increasing the frequency.

How to Calculate Smallest diameter of hole given empirical constant?

Smallest diameter of hole given empirical constant calculator uses Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant) to calculate the Smaller Diameter, Smallest diameter of hole given empirical constant formula is defined as smallest diameter at depth of crater produced during EDM. Smaller Diameter is denoted by d symbol.

How to calculate Smallest diameter of hole given empirical constant using this online calculator? To use this online calculator for Smallest diameter of hole given empirical constant, enter Taper Produced in EDM (T_sd) & Empirical Constant (K_T) and hit the calculate button. Here is how the Smallest diameter of hole given empirical constant calculation can be explained with given input values -> 0.4 = sqrt(0.2/0.1388).

FAQ

What is Smallest diameter of hole given empirical constant?

Smallest diameter of hole given empirical constant formula is defined as smallest diameter at depth of crater produced during EDM and is represented as d = sqrt(T_sd/K_T) or Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant). Taper produced in EDM is the taper produced due to side sparks during EDM & Empirical constant is defined as the constant used to calculate the Taper produced during EDM due to side sparks.

How to calculate Smallest diameter of hole given empirical constant?

Smallest diameter of hole given empirical constant formula is defined as smallest diameter at depth of crater produced during EDM is calculated using Smaller Diameter = sqrt(Taper Produced in EDM/Empirical Constant). To calculate Smallest diameter of hole given empirical constant, you need Taper Produced in EDM (T_sd) & Empirical Constant (K_T). With our tool, you need to enter the respective value for Taper Produced in EDM & Empirical Constant and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Smaller Diameter?

In this formula, Smaller Diameter uses Taper Produced in EDM & Empirical Constant. We can use 1 other way(s) to calculate the same, which is/are as follows -

Smaller Diameter = Larger Diameter-2*Depth of Machined Surface*Taper Produced in EDM

Home

FREE PDFs

🔍 Search