Surface Area of Sedimentation Tank Solution

STEP 0: Pre-Calculation Summary
Formula Used
Area = Width*Length of sedimentation tank
A = w*LS
This formula uses 3 Variables
Variables Used
Area - (Measured in Square Meter) - The area is the amount of two-dimensional space taken up by an object.
Width - (Measured in Meter) - Width is the measurement or extent of something from side to side.
Length of sedimentation tank - (Measured in Meter) - Length of sedimentation tank is the bottom is slightly sloped to facilitate sludge scraping. The general dimension of a sedimentation tank are as follows: Length = 4 × Width.
STEP 1: Convert Input(s) to Base Unit
Width: 2.29 Meter --> 2.29 Meter No Conversion Required
Length of sedimentation tank: 45 Meter --> 45 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
A = w*LS --> 2.29*45
Evaluating ... ...
A = 103.05
STEP 3: Convert Result to Output's Unit
103.05 Square Meter --> No Conversion Required
FINAL ANSWER
103.05 Square Meter <-- Area
(Calculation completed in 00.020 seconds)

Credits

Created by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has created this Calculator and 500+ more calculators!
Verified by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has verified this Calculator and 600+ more calculators!

5 Surface Area of Tank Calculators

Surface Area given Length of Sedimentation Tank with respect to Surface Area
Go Area = Length of sedimentation tank*Cross-Sectional Area/Height of Crack
Surface Area with respect to Settling Velocity
Go Area = Cross-Sectional Area*Falling Speed/Settling Velocity
Surface Area with respect to Darcy Weishbach Friction Factor
Go Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor)
Surface Area of Sedimentation Tank
Go Area = Width*Length of sedimentation tank
Surface Area with respect to Cross-section Area for Practical Purpose
Go Area = 10*Cross-Sectional Area

Surface Area of Sedimentation Tank Formula

Area = Width*Length of sedimentation tank
A = w*LS

What is Sedimentation?

Sedimentation is the tendency for particles in suspension to settle out of the fluid in which they are entrained and come to rest against a barrier. This is due to their motion through the fluid in response to the forces acting on them: these forces can be due to gravity, centrifugal acceleration, or electromagnetism.

How to Calculate Surface Area of Sedimentation Tank?

Surface Area of Sedimentation Tank calculator uses Area = Width*Length of sedimentation tank to calculate the Area, The Surface Area of Sedimentation Tank is defined as a measure of the total area that the surface of the object occupies. Area is denoted by A symbol.

How to calculate Surface Area of Sedimentation Tank using this online calculator? To use this online calculator for Surface Area of Sedimentation Tank, enter Width (w) & Length of sedimentation tank (LS) and hit the calculate button. Here is how the Surface Area of Sedimentation Tank calculation can be explained with given input values -> 103.05 = 2.29*45.

FAQ

What is Surface Area of Sedimentation Tank?
The Surface Area of Sedimentation Tank is defined as a measure of the total area that the surface of the object occupies and is represented as A = w*LS or Area = Width*Length of sedimentation tank. Width is the measurement or extent of something from side to side & Length of sedimentation tank is the bottom is slightly sloped to facilitate sludge scraping. The general dimension of a sedimentation tank are as follows: Length = 4 × Width.
How to calculate Surface Area of Sedimentation Tank?
The Surface Area of Sedimentation Tank is defined as a measure of the total area that the surface of the object occupies is calculated using Area = Width*Length of sedimentation tank. To calculate Surface Area of Sedimentation Tank, you need Width (w) & Length of sedimentation tank (LS). With our tool, you need to enter the respective value for Width & Length of sedimentation tank and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Area?
In this formula, Area uses Width & Length of sedimentation tank. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Area = Length of sedimentation tank*Cross-Sectional Area/Height of Crack
  • Area = Cross-Sectional Area*Falling Speed/Settling Velocity
  • Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor)
  • Area = 10*Cross-Sectional Area
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!