Surface Area with respect to Darcy Weishbach Friction Factor Solution

STEP 0: Pre-Calculation Summary
Formula Used
Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor)
A = Acs*sqrt(8/f)
This formula uses 1 Functions, 3 Variables
Functions Used
sqrt - A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number., sqrt(Number)
Variables Used
Area - (Measured in Square Meter) - The area is the amount of two-dimensional space taken up by an object.
Cross-Sectional Area - (Measured in Square Meter) - Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.
Darcy Friction Factor - Darcy Friction Factor is denoted by f. Its value depends on the flow's Reynolds number Re and on the pipe's relative roughness ε / D. It can be obtained from Moody's chart.
STEP 1: Convert Input(s) to Base Unit
Cross-Sectional Area: 13 Square Meter --> 13 Square Meter No Conversion Required
Darcy Friction Factor: 0.5 --> No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
A = Acs*sqrt(8/f) --> 13*sqrt(8/0.5)
Evaluating ... ...
A = 52
STEP 3: Convert Result to Output's Unit
52 Square Meter --> No Conversion Required
FINAL ANSWER
52 Square Meter <-- Area
(Calculation completed in 00.004 seconds)

Credits

Created by Ishita Goyal
Meerut Institute of Engineering and Technology (MIET), Meerut
Ishita Goyal has created this Calculator and 500+ more calculators!
Verified by Suraj Kumar
Birsa Institute of Technology (BIT), Sindri
Suraj Kumar has verified this Calculator and 600+ more calculators!

5 Surface Area of Tank Calculators

Surface Area given Length of Sedimentation Tank with respect to Surface Area
Go Area = Length of sedimentation tank*Cross-Sectional Area/Height of Crack
Surface Area with respect to Settling Velocity
Go Area = Cross-Sectional Area*Falling Speed/Settling Velocity
Surface Area with respect to Darcy Weishbach Friction Factor
Go Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor)
Surface Area of Sedimentation Tank
Go Area = Width*Length of sedimentation tank
Surface Area with respect to Cross-section Area for Practical Purpose
Go Area = 10*Cross-Sectional Area

Surface Area with respect to Darcy Weishbach Friction Factor Formula

Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor)
A = Acs*sqrt(8/f)

What is Sedimentation ?

Sedimentation is the tendency for particles in suspension to settle out of the fluid in which they are entrained and come to rest against a barrier. This is due to their motion through the fluid in response to the forces acting on them.

How to Calculate Surface Area with respect to Darcy Weishbach Friction Factor?

Surface Area with respect to Darcy Weishbach Friction Factor calculator uses Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor) to calculate the Area, The Surface Area with respect to Darcy Weishbach Friction Factor is defined as the total area of the object. Area is denoted by A symbol.

How to calculate Surface Area with respect to Darcy Weishbach Friction Factor using this online calculator? To use this online calculator for Surface Area with respect to Darcy Weishbach Friction Factor, enter Cross-Sectional Area (Acs) & Darcy Friction Factor (f) and hit the calculate button. Here is how the Surface Area with respect to Darcy Weishbach Friction Factor calculation can be explained with given input values -> 52 = 13*sqrt(8/0.5).

FAQ

What is Surface Area with respect to Darcy Weishbach Friction Factor?
The Surface Area with respect to Darcy Weishbach Friction Factor is defined as the total area of the object and is represented as A = Acs*sqrt(8/f) or Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor). Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point & Darcy Friction Factor is denoted by f. Its value depends on the flow's Reynolds number Re and on the pipe's relative roughness ε / D. It can be obtained from Moody's chart.
How to calculate Surface Area with respect to Darcy Weishbach Friction Factor?
The Surface Area with respect to Darcy Weishbach Friction Factor is defined as the total area of the object is calculated using Area = Cross-Sectional Area*sqrt(8/Darcy Friction Factor). To calculate Surface Area with respect to Darcy Weishbach Friction Factor, you need Cross-Sectional Area (Acs) & Darcy Friction Factor (f). With our tool, you need to enter the respective value for Cross-Sectional Area & Darcy Friction Factor and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Area?
In this formula, Area uses Cross-Sectional Area & Darcy Friction Factor. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Area = Width*Length of sedimentation tank
  • Area = Length of sedimentation tank*Cross-Sectional Area/Height of Crack
  • Area = Cross-Sectional Area*Falling Speed/Settling Velocity
  • Area = 10*Cross-Sectional Area
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!