Temperature given Helmholtz free energy and Helmholtz free entropy Calculator

↳

⤿

✖The Helmholtz free energy of system is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature and volume.ⓘ Helmholtz Free Energy of System [A]			+10% -10%
✖The Helmholtz Free Entropy is used to express the effect of electrostatic forces in an electrolyte on its thermodynamic state.ⓘ Helmholtz Free Entropy [Φ]			+10% -10%

✖The temperature of liquid is the degree or intensity of heat present in a liquid.ⓘ Temperature given Helmholtz free energy and Helmholtz free entropy [T]

⎘ Copy

👎

Formula

✖

Temperature given Helmholtz free energy and Helmholtz free entropy

Formula

`"T" = -("A"/"Φ")`

Example

`"-0.15K"=-("10.5J"/"70J/K")`

Calculator

LaTeX

Reset

👍

Download Electrochemistry Formula PDF

Temperature given Helmholtz free energy and Helmholtz free entropy Solution

STEP 0: Pre-Calculation Summary

Formula Used

Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy)
T = -(A/Φ)
This formula uses 3 Variables

Variables Used

Temperature of Liquid - (Measured in Kelvin) - The temperature of liquid is the degree or intensity of heat present in a liquid.
Helmholtz Free Energy of System - (Measured in Joule) - The Helmholtz free energy of system is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature and volume.
Helmholtz Free Entropy - (Measured in Joule per Kelvin) - The Helmholtz Free Entropy is used to express the effect of electrostatic forces in an electrolyte on its thermodynamic state.

STEP 1: Convert Input(s) to Base Unit

Helmholtz Free Energy of System: 10.5 Joule --> 10.5 Joule No Conversion Required
Helmholtz Free Entropy: 70 Joule per Kelvin --> 70 Joule per Kelvin No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T = -(A/Φ) --> -(10.5/70)

Evaluating ... ...

T = -0.15

STEP 3: Convert Result to Output's Unit

-0.15 Kelvin --> No Conversion Required

FINAL ANSWER

-0.15 Kelvin <-- Temperature of Liquid

(Calculation completed in 00.004 seconds)

You are here -

Home » Chemistry » Electrochemistry » Temperature of Concentration Cell » Temperature given Helmholtz free energy and Helmholtz free entropy

Credits

Created by Prashant Singh

K J Somaiya College of science (K J Somaiya), Mumbai

Prashant Singh has created this Calculator and 700+ more calculators!

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Calculator and 1600+ more calculators!

< 14 Temperature of Concentration Cell Calculators

Temperature of concentration cell with transference given valencies

Go Temperature of Liquid = ((EMF of Cell*Number of Positive and Negative Ions*Valencies of Positive and Negative Ions*[Faraday])/(Transport Number of Anion*Total number of Ions*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)

Temperature of Concentration Cell with Transference given Transport Number of Anion

Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*Transport Number of Anion*[R]))/(ln(Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient))

Temperature of Concentration Cell without Transference given Molalities

Go Temperature of Liquid = (EMF of Cell*([Faraday]/2*[R]))/(ln((Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient)))

Temperature of concentration cell without transference given concentration and fugacity

Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/ln((Cathodic Concentration*Cathodic Fugacity)/(Anodic Concentration*Anodic Fugacity))

Temperature of Concentration Cell with Transference given Activities

Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(Transport Number of Anion*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)

Temperature of concentration cell without transference for dilute solution given concentration

Go Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/(ln(Cathodic Concentration/Anodic Concentration))

Temperature of Concentration Cell without Transference given Activities

Go Temperature of Liquid = (EMF of Cell*([Faraday]/[R]))/(ln(Cathodic Ionic Activity/Anodic Ionic Activity))

Temperature given Tafel Slope

Go Temperature of Liquid = (Tafel Slope*Charge transfer coefficient*Elementary Charge)/(ln(10)*[BoltZ])

Temperature given Gibbs free entropy

Go Temperature of Liquid = ((Internal Energy+(Pressure*Volume))/(Entropy-Gibbs Free Entropy))

Temperature given Gibbs and Helmholtz free entropy

Go Temperature of Liquid = (Pressure*Volume)/(Helmholtz Free Entropy-Gibbs Free Entropy)

Temperature given internal energy and Helmholtz free entropy

Go Temperature of Liquid = Internal Energy/(Entropy-Helmholtz Free Entropy)

Temperature given Thermal Voltage and Electric Elementary Charge

Go Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ])

Temperature given Helmholtz free energy and Helmholtz free entropy

Go Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy)

Temperature given Gibbs free energy and Gibbs free entropy

Go Temperature of Liquid = -(Gibbs Free Energy/Gibbs Free Entropy)

Temperature given Helmholtz free energy and Helmholtz free entropy Formula

Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy)
T = -(A/Φ)

What is Debye–Huckel limiting law?

The chemists Peter Debye and Erich Hückel noticed that solutions that contain ionic solutes do not behave ideally even at very low concentrations. So, while the concentration of the solutes is fundamental to the calculation of the dynamics of a solution, they theorized that an extra factor that they termed gamma is necessary to the calculation of the activity coefficients of the solution. Hence they developed the Debye–Hückel equation and Debye–Hückel limiting law. The activity is only proportional to the concentration and is altered by a factor known as the activity coefficient. This factor takes into account the interaction energy of ions in the solution.

How to Calculate Temperature given Helmholtz free energy and Helmholtz free entropy?

Temperature given Helmholtz free energy and Helmholtz free entropy calculator uses Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy) to calculate the Temperature of Liquid, The Temperature given Helmholtz free energy and Helmholtz free entropy formula is defined as the negative ratio of Helmholtz free energy to the entropy of the system. Temperature of Liquid is denoted by T symbol.

How to calculate Temperature given Helmholtz free energy and Helmholtz free entropy using this online calculator? To use this online calculator for Temperature given Helmholtz free energy and Helmholtz free entropy, enter Helmholtz Free Energy of System (A) & Helmholtz Free Entropy (Φ) and hit the calculate button. Here is how the Temperature given Helmholtz free energy and Helmholtz free entropy calculation can be explained with given input values -> -0.15 = -(10.5/70).

FAQ

What is Temperature given Helmholtz free energy and Helmholtz free entropy?

The Temperature given Helmholtz free energy and Helmholtz free entropy formula is defined as the negative ratio of Helmholtz free energy to the entropy of the system and is represented as T = -(A/Φ) or Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy). The Helmholtz free energy of system is a thermodynamic potential that measures the useful work obtainable from a closed thermodynamic system at a constant temperature and volume & The Helmholtz Free Entropy is used to express the effect of electrostatic forces in an electrolyte on its thermodynamic state.

How to calculate Temperature given Helmholtz free energy and Helmholtz free entropy?

The Temperature given Helmholtz free energy and Helmholtz free entropy formula is defined as the negative ratio of Helmholtz free energy to the entropy of the system is calculated using Temperature of Liquid = -(Helmholtz Free Energy of System/Helmholtz Free Entropy). To calculate Temperature given Helmholtz free energy and Helmholtz free entropy, you need Helmholtz Free Energy of System (A) & Helmholtz Free Entropy (Φ). With our tool, you need to enter the respective value for Helmholtz Free Energy of System & Helmholtz Free Entropy and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Temperature of Liquid?

In this formula, Temperature of Liquid uses Helmholtz Free Energy of System & Helmholtz Free Entropy. We can use 13 other way(s) to calculate the same, which is/are as follows -

Temperature of Liquid = Internal Energy/(Entropy-Helmholtz Free Entropy)
Temperature of Liquid = ((Internal Energy+(Pressure*Volume))/(Entropy-Gibbs Free Entropy))
Temperature of Liquid = (Pressure*Volume)/(Helmholtz Free Entropy-Gibbs Free Entropy)
Temperature of Liquid = -(Gibbs Free Energy/Gibbs Free Entropy)
Temperature of Liquid = (Tafel Slope*Charge transfer coefficient*Elementary Charge)/(ln(10)*[BoltZ])
Temperature of Liquid = (Thermal Voltage*Elementary Charge)/([BoltZ])
Temperature of Liquid = (EMF of Cell*([Faraday]/[R]))/(ln(Cathodic Ionic Activity/Anodic Ionic Activity))
Temperature of Liquid = (EMF of Cell*([Faraday]/2*[R]))/(ln((Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient)))
Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/ln((Cathodic Concentration*Cathodic Fugacity)/(Anodic Concentration*Anodic Fugacity))
Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*[R]))/(ln(Cathodic Concentration/Anodic Concentration))
Temperature of Liquid = ((EMF of Cell*[Faraday])/(2*Transport Number of Anion*[R]))/(ln(Cathodic Electrolyte Molality*Cathodic Activity Coefficient)/(Anodic Electrolyte Molality*Anodic Activity Coefficient))
Temperature of Liquid = ((EMF of Cell*[Faraday])/(Transport Number of Anion*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)
Temperature of Liquid = ((EMF of Cell*Number of Positive and Negative Ions*Valencies of Positive and Negative Ions*[Faraday])/(Transport Number of Anion*Total number of Ions*[R]))/ln(Cathodic Ionic Activity/Anodic Ionic Activity)

Home

FREE PDFs

🔍 Search