Tensile Yield Strength of Bolt Calculator

✖Factor of Safety for Bolt expresses how much stronger a bolt or bolted joint system is than it needs to be for an intended load.ⓘ Factor of Safety for Bolt [f_s]			+10% -10%
✖Tensile stress in bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.ⓘ Tensile stress in bolt [σ_t]			+10% -10%

✖Tensile yield strength of bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.ⓘ Tensile Yield Strength of Bolt [σ_yt]

⎘ Copy

👎

Formula

✖

Tensile Yield Strength of Bolt

Formula

`"σ"_{"yt"} = "f"_{"s"}*"σ"_{"t"}`

Example

`"377N/mm²"="2.6"*"145N/mm²"`

Calculator

LaTeX

Reset

👍

Download Structural Response and Force Analysis Formulas PDF PDF Image

Tensile Yield Strength of Bolt Solution

STEP 0: Pre-Calculation Summary

Formula Used

Tensile yield strength of bolt = Factor of Safety for Bolt*Tensile stress in bolt
σ_yt = f_s*σ_t
This formula uses 3 Variables

Variables Used

Tensile yield strength of bolt - (Measured in Pascal) - Tensile yield strength of bolt is the stress the bolt can withstand without permanent deformation or a point at which it will no longer return to its original dimensions.
Factor of Safety for Bolt - Factor of Safety for Bolt expresses how much stronger a bolt or bolted joint system is than it needs to be for an intended load.
Tensile stress in bolt - (Measured in Pascal) - Tensile stress in bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

STEP 1: Convert Input(s) to Base Unit

Factor of Safety for Bolt: 2.6 --> No Conversion Required
Tensile stress in bolt: 145 Newton per Square Millimeter --> 145000000 Pascal (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

σ_yt = f_s*σ_t --> 2.6*145000000

Evaluating ... ...

σ_yt = 377000000

STEP 3: Convert Result to Output's Unit

377000000 Pascal -->377 Newton per Square Millimeter (Check conversion here)

FINAL ANSWER

377 Newton per Square Millimeter <-- Tensile yield strength of bolt

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Threaded Fastener » Structural Response and Force Analysis » Tensile Yield Strength of Bolt

Credits

Created by Vaibhav Malani

National Institute of Technology (NIT), Tiruchirapalli

Vaibhav Malani has created this Calculator and 600+ more calculators!

Verified by Rajat Vishwakarma

University Institute of Technology RGPV (UIT - RGPV), Bhopal

Rajat Vishwakarma has verified this Calculator and 400+ more calculators!

< 17 Structural Response and Force Analysis Calculators

Change in external load on bolt given external load and stiffness of boad

Go Change in External Load = External Force on Bolt*(Stiffness of Threaded Bolt/(Stiffness of Threaded Bolt+Combined Stiffness of Gasket and Parts))

Tensile Stress Area of Threaded fastener

Go Tensile stress area of threaded fastener = (pi/4)*(((Pitch Diameter of External Thread+Minor Diameter of External Thread)/2)^2)

Shear Stress at Core Diameter of Threaded Fastener given Tensile Force

Go Shear stress in bolt = Tensile Force on Bolt/(pi*Core Diameter of Threaded Bolt*Height of nut)

Tensile Force acting on Bolt given Shear Stress

Go Tensile Force on Bolt = (pi*Shear stress in bolt*Core Diameter of Threaded Bolt*Height of nut)

Tensile Force acting on Bolt

Go Tensile Force on Bolt = (pi*Shear stress in bolt*Core Diameter of Threaded Bolt*Height of nut)

Tensile Stress in Core Cross-Section of Bolt given Tensile Force and Core Diameter

Go Tensile stress in bolt = Tensile Force on Bolt/((pi/4)*(Core Diameter of Threaded Bolt^2))

Tensile Force acting on Bolt given Tensile Stress

Go Tensile Force on Bolt = Tensile stress in bolt*pi*(Core Diameter of Threaded Bolt^2)/4

Change in Load on Bolt given Resultant Load and Initial Preload in Bolt

Go Change in External Load = Resultant load on bolt-Initial preload in bolt due to tightening of nut

Initial Preload in Bolt due to Tightening

Go Initial preload in bolt due to tightening of nut = Resultant load on bolt-Change in External Load

Resultant Load on Bolt

Go Resultant load on bolt = Initial preload in bolt due to tightening of nut+Change in External Load

Shear Stress at Core Diameter of Threaded Fasteners given Tensile Yield Strength

Go Shear stress in bolt = Tensile yield strength of bolt/(2*Factor of Safety for Bolt)

Tensile Stress in Core Cross-Section of Bolt given Tensile Yield Strength

Go Tensile stress in bolt = Tensile yield strength of bolt/Factor of Safety for Bolt

Tensile Yield Strength of Bolt

Go Tensile yield strength of bolt = Factor of Safety for Bolt*Tensile stress in bolt

Shear Stress at Core Diameter given Shear Yield Strength of Threaded Fastener

Go Shear stress in bolt = Shear yield strength of bolt/Factor of Safety for Bolt

Primary Shear Force on each Bolt

Go Primary shear load on bolt = External Force on Bolt/Number of Bolts in Joint

External Force on Bolt

Go External Force on Bolt = Number of Bolts in Joint*Primary shear load on bolt

Ultimate Tensile Strength of Bolt

Go Ultimate tensile strength of bolt = 2*Endurance limit of rotating beam bolt specimen

Tensile Yield Strength of Bolt Formula

Tensile yield strength of bolt = Factor of Safety for Bolt*Tensile stress in bolt
σ_yt = f_s*σ_t

What is a fastener?

A fastener or fastening is a hardware device that mechanically joins or affixes two or more objects together. In general, fasteners are used to create non-permanent joints; that is, joints that can be removed or dismantled without damaging the joining components.

How to Calculate Tensile Yield Strength of Bolt?

Tensile Yield Strength of Bolt calculator uses Tensile yield strength of bolt = Factor of Safety for Bolt*Tensile stress in bolt to calculate the Tensile yield strength of bolt, Tensile Yield Strength of Bolt formula is the maximum stress that the bolt can endure beyond which it begins to permanently deform, not able to return to its original dimensions. Tensile yield strength of bolt is denoted by σ_yt symbol.

How to calculate Tensile Yield Strength of Bolt using this online calculator? To use this online calculator for Tensile Yield Strength of Bolt, enter Factor of Safety for Bolt (f_s) & Tensile stress in bolt (σ_t) and hit the calculate button. Here is how the Tensile Yield Strength of Bolt calculation can be explained with given input values -> 0.000377 = 2.6*145000000.

FAQ

What is Tensile Yield Strength of Bolt?

Tensile Yield Strength of Bolt formula is the maximum stress that the bolt can endure beyond which it begins to permanently deform, not able to return to its original dimensions and is represented as σ_yt = f_s*σ_t or Tensile yield strength of bolt = Factor of Safety for Bolt*Tensile stress in bolt. Factor of Safety for Bolt expresses how much stronger a bolt or bolted joint system is than it needs to be for an intended load & Tensile stress in bolt can be defined as the magnitude of force applied along a bolt, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

How to calculate Tensile Yield Strength of Bolt?

Tensile Yield Strength of Bolt formula is the maximum stress that the bolt can endure beyond which it begins to permanently deform, not able to return to its original dimensions is calculated using Tensile yield strength of bolt = Factor of Safety for Bolt*Tensile stress in bolt. To calculate Tensile Yield Strength of Bolt, you need Factor of Safety for Bolt (f_s) & Tensile stress in bolt (σ_t). With our tool, you need to enter the respective value for Factor of Safety for Bolt & Tensile stress in bolt and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search