Thickness of Eye End of Knuckle Joint given Bending Moment in Pin Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
b = 4*(2*Mb/L-a/3)
This formula uses 4 Variables
Variables Used
Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Bending Moment in Knuckle Pin - (Measured in Newton Meter) - Bending Moment in Knuckle Pin is the amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
STEP 1: Convert Input(s) to Base Unit
Bending Moment in Knuckle Pin: 450000 Newton Millimeter --> 450 Newton Meter (Check conversion here)
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Fork Eye of Knuckle Joint: 26 Millimeter --> 0.026 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
b = 4*(2*Mb/L-a/3) --> 4*(2*450/50000-0.026/3)
Evaluating ... ...
b = 0.0373333333333333
STEP 3: Convert Result to Output's Unit
0.0373333333333333 Meter -->37.3333333333333 Millimeter (Check conversion here)
FINAL ANSWER
37.3333333333333 โ‰ˆ 37.33333 Millimeter <-- Thickess of Eye of Knuckle Joint
(Calculation completed in 00.020 seconds)

Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2500+ more calculators!

16 Eye Calculators

Bending Stress in Knuckle Pin given Load, Thickness of Eyes and Pin Diameter
Go Bending Stress in Knuckle Pin = (32*Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3))/(pi*Diameter of Knuckle Pin^3)
Thickness of Eye End of Knuckle Joint given Bending Stress in Pin
Go Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter
Go Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Shear Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter
Go Shear Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness
Go Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye
Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness
Go Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickness of Eye End of Knuckle Joint given Shear Stress in Eye
Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork
Go Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)
Thickness of Eye End of Knuckle Joint given Bending Moment in Pin
Go Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions
Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)
Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions
Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)
Tensile Stress in Rod of Knuckle Joint
Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)
Bending Stress in Knuckle Pin given Bending Moment in Pin
Go Bending Stress in Knuckle Pin = (32*Bending Moment in Knuckle Pin)/(pi*Diameter of Knuckle Pin^3)
Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter
Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)
Thickness of Eye of Knuckle Joint given Rod Diameter
Go Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint

Thickness of Eye End of Knuckle Joint given Bending Moment in Pin Formula

Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
b = 4*(2*Mb/L-a/3)

What is a knuckle joint?

A knuckle joint is used to connect the two rods which are under the tensile load when there is a requirement for a small amount of flexibility or when angular movement is necessary. There is always an axial or linear line of action of load.
The knuckle joint assembly consists of the following major components:
Single eye.
Double-eye or fork
Knuckle pin.

How to Calculate Thickness of Eye End of Knuckle Joint given Bending Moment in Pin?

Thickness of Eye End of Knuckle Joint given Bending Moment in Pin calculator uses Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3) to calculate the Thickess of Eye of Knuckle Joint, The Thickness of eye end of knuckle joint given bending moment in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to calculate Thickness of Eye End of Knuckle Joint given Bending Moment in Pin using this online calculator? To use this online calculator for Thickness of Eye End of Knuckle Joint given Bending Moment in Pin, enter Bending Moment in Knuckle Pin (Mb), Load on Knuckle Joint (L) & Thickess of Fork Eye of Knuckle Joint (a) and hit the calculate button. Here is how the Thickness of Eye End of Knuckle Joint given Bending Moment in Pin calculation can be explained with given input values -> 37333.33 = 4*(2*450/50000-0.026/3).

FAQ

What is Thickness of Eye End of Knuckle Joint given Bending Moment in Pin?
The Thickness of eye end of knuckle joint given bending moment in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis and is represented as b = 4*(2*Mb/L-a/3) or Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3). Bending Moment in Knuckle Pin is the amount of bending moment acting onto the knuckle pin when the knuckle joint is subjected to axial loading, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts & Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
How to calculate Thickness of Eye End of Knuckle Joint given Bending Moment in Pin?
The Thickness of eye end of knuckle joint given bending moment in pin is the thickness of the eye of the nonforked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3). To calculate Thickness of Eye End of Knuckle Joint given Bending Moment in Pin, you need Bending Moment in Knuckle Pin (Mb), Load on Knuckle Joint (L) & Thickess of Fork Eye of Knuckle Joint (a). With our tool, you need to enter the respective value for Bending Moment in Knuckle Pin, Load on Knuckle Joint & Thickess of Fork Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickess of Eye of Knuckle Joint?
In this formula, Thickess of Eye of Knuckle Joint uses Bending Moment in Knuckle Pin, Load on Knuckle Joint & Thickess of Fork Eye of Knuckle Joint. We can use 4 other way(s) to calculate the same, which is/are as follows -
  • Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
  • Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint
Let Others Know
โœ–
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!