## Credits

Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2600+ more calculators!

## Thickness of fork eye of knuckle joint given bending stress in pin Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4))
a = 3*(((pi*(d^3)*σb)/(16*L))-(b/4))
This formula uses 1 Constants, 4 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Diameter of Knuckle Pin - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint. (Measured in Millimeter)
Bending Stress in Knuckle Pin - Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment. (Measured in Newton per Square Millimeter)
Load on Knuckle Joint - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts. (Measured in Newton)
Thickess of Eye of Knuckle Joint - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius. (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
Diameter of Knuckle Pin: 38 Millimeter --> 0.038 Meter (Check conversion here)
Bending Stress in Knuckle Pin: 82 Newton per Square Millimeter --> 82000000 Pascal (Check conversion here)
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Thickess of Eye of Knuckle Joint: 40 Millimeter --> 0.04 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = 3*(((pi*(d^3)*σb)/(16*L))-(b/4)) --> 3*(((pi*(0.038^3)*82000000)/(16*50000))-(0.04/4))
Evaluating ... ...
a = 0.0230085326669921
STEP 3: Convert Result to Output's Unit
0.0230085326669921 Meter -->23.0085326669921 Millimeter (Check conversion here)
23.0085326669921 Millimeter <-- Thickess of Fork Eye of Knuckle Joint
(Calculation completed in 00.015 seconds)

## < 10+ Design of Knuckle Joint Calculators

Compressive stress in pin inside fork of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(2*(Thickess of Fork Eye of Knuckle Joint)*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given load and shear stress in pin
Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*(Shear Stress in Pin))) Go
Diameter of rod of knuckle joint given tensile stress in rod
Diameter of rod = sqrt((4*Load on Knuckle Joint)/(pi*(Tensile Stress In Rod))) Go
Compressive stress in pin inside eye of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given compressive stress in eye end portion of pin
Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Pin*Thickess of Eye of Knuckle Joint) Go
Length of pin of knuckle joint in contact with the eye end
Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin) Go
Shear stress in pin of knuckle joint given load and pin diameter
Shear Stress in Pin = (2*Load on Knuckle Joint)/(pi*(Diameter of Knuckle Pin^2)) Go
Tensile stress in rod of knuckle joint
Tensile Stress In Rod = (4*Load on Knuckle Joint)/(pi*(Diameter of rod^2)) Go
Diameter of rod of knuckle joint given its enlarged diameter near the joint
Diameter of rod = Enlarged Diameter of Rod/1.1 Go
Enlarged Diameter of rod of knuckle joint near the joint
Enlarged Diameter of Rod = 1.1*Diameter of rod Go

### Thickness of fork eye of knuckle joint given bending stress in pin Formula

Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4))
a = 3*(((pi*(d^3)*σb)/(16*L))-(b/4))

1.Knuckle joint can withstand large tensile loads.
2.It has good mechanical rigidity.
3.Also, it is simple to manufacture and set up.
4.It can be easily assembled and dismantled.
5.Design is simple and easy.
6.Fewer parts are less costly and more reliable.
7.It can permit angular movement between rods.
8.High repeating accuracy even with varying material thickness and tensile strengths.
9.Reduced impact shock and high system rigidity.
10.Long tool life.

## How to Calculate Thickness of fork eye of knuckle joint given bending stress in pin?

Thickness of fork eye of knuckle joint given bending stress in pin calculator uses Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4)) to calculate the Thickess of Fork Eye of Knuckle Joint, Thickness of fork eye of knuckle joint given bending stress in pin is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis. Thickess of Fork Eye of Knuckle Joint is denoted by a symbol.

How to calculate Thickness of fork eye of knuckle joint given bending stress in pin using this online calculator? To use this online calculator for Thickness of fork eye of knuckle joint given bending stress in pin, enter Diameter of Knuckle Pin (d), Bending Stress in Knuckle Pin b), Load on Knuckle Joint (L) & Thickess of Eye of Knuckle Joint (b) and hit the calculate button. Here is how the Thickness of fork eye of knuckle joint given bending stress in pin calculation can be explained with given input values -> 23.00853 = 3*(((pi*(0.038^3)*82000000)/(16*50000))-(0.04/4)).

### FAQ

What is Thickness of fork eye of knuckle joint given bending stress in pin?
Thickness of fork eye of knuckle joint given bending stress in pin is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis and is represented as a = 3*(((pi*(d^3)*σb)/(16*L))-(b/4)) or Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4)). Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint, Bending Stress in Knuckle Pin is the amount of bending stress induced into the knuckle pin when the knuckle joint is subjected to axial loading resulting in a bending moment, Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts & Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
How to calculate Thickness of fork eye of knuckle joint given bending stress in pin?
Thickness of fork eye of knuckle joint given bending stress in pin is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4)). To calculate Thickness of fork eye of knuckle joint given bending stress in pin, you need Diameter of Knuckle Pin (d), Bending Stress in Knuckle Pin b), Load on Knuckle Joint (L) & Thickess of Eye of Knuckle Joint (b). With our tool, you need to enter the respective value for Diameter of Knuckle Pin, Bending Stress in Knuckle Pin, Load on Knuckle Joint & Thickess of Eye of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickess of Fork Eye of Knuckle Joint?
In this formula, Thickess of Fork Eye of Knuckle Joint uses Diameter of Knuckle Pin, Bending Stress in Knuckle Pin, Load on Knuckle Joint & Thickess of Eye of Knuckle Joint. We can use 5 other way(s) to calculate the same, which is/are as follows -
• Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin)
• Thickess of Fork Eye of Knuckle Joint = 3*((2*Bending Moment in Knuckle Pin/Load on Knuckle Joint)-(Thickess of Eye of Knuckle Joint/4))
• Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
• Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
• Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of rod
Let Others Know