Thickness of Eye of Knuckle Joint given Rod Diameter Calculator

✖Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickness of Eye of Knuckle Joint given Rod Diameter [b]

⎘ Copy

👎

Formula

✖

Thickness of Eye of Knuckle Joint given Rod Diameter

Formula

`"b" = 1.25*"d"_{"rk"}`

Example

`"38.75mm"=1.25*"31mm"`

Calculator

LaTeX

Reset

👍

Download Eye Formulas PDF PDF Image

Thickness of Eye of Knuckle Joint given Rod Diameter Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint
b = 1.25*d_rk
This formula uses 2 Variables

Variables Used

Thickess of Eye of Knuckle Joint - (Measured in Meter) - Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.
Diameter of Rod of Knuckle Joint - (Measured in Meter) - Diameter of Rod of Knuckle Joint is defined as the diameter of the end rods of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Diameter of Rod of Knuckle Joint: 31 Millimeter --> 0.031 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

b = 1.25*d_rk --> 1.25*0.031

Evaluating ... ...

b = 0.03875

STEP 3: Convert Result to Output's Unit

0.03875 Meter -->38.75 Millimeter (Check conversion here)

FINAL ANSWER

38.75 Millimeter <-- Thickess of Eye of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Eye » Thickness of Eye of Knuckle Joint given Rod Diameter

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 16 Eye Calculators

Bending Stress in Knuckle Pin given Load, Thickness of Eyes and Pin Diameter

Go Bending Stress in Knuckle Pin = (32*Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3))/(pi*Diameter of Knuckle Pin^3)

Thickness of Eye End of Knuckle Joint given Bending Stress in Pin

Go Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Go Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Shear Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Go Shear Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Tensile Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Go Tensile Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye

Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Shear Stress in Eye of Knuckle Joint given Load, Outer Diameter of Eye and its Thickness

Go Shear Stress in Eye of Knuckle Joint = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Thickness of Eye End of Knuckle Joint given Shear Stress in Eye

Go Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Max Bending Moment in Knuckle Pin given Load, Thickness of Eye and Fork

Go Bending Moment in Knuckle Pin = Load on Knuckle Joint/2*(Thickess of Eye of Knuckle Joint/4+Thickess of Fork Eye of Knuckle Joint/3)

Thickness of Eye End of Knuckle Joint given Bending Moment in Pin

Go Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)

Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*Diameter of Knuckle Pin)

Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

Go Compressive Stress in Knuckle Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin)

Tensile Stress in Rod of Knuckle Joint

Go Tensile Stress in Knuckle Joint Rod = (4*Load on Knuckle Joint)/(pi*Diameter of Rod of Knuckle Joint^2)

Bending Stress in Knuckle Pin given Bending Moment in Pin

Go Bending Stress in Knuckle Pin = (32*Bending Moment in Knuckle Pin)/(pi*Diameter of Knuckle Pin^3)

Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

Go Shear Stress in Knuckle Pin = (2*Load on Knuckle Joint)/(pi*Diameter of Knuckle Pin^2)

Thickness of Eye of Knuckle Joint given Rod Diameter

Go Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint

Thickness of Eye of Knuckle Joint given Rod Diameter Formula

Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint
b = 1.25*d_rk

What is difference between crushing and buckling?

Crushing means breaking and failure of short column structure when subjected to high compressive stress and Buckling is failure of long column structure when subjected to high buckling stress.

How to Calculate Thickness of Eye of Knuckle Joint given Rod Diameter?

Thickness of Eye of Knuckle Joint given Rod Diameter calculator uses Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint to calculate the Thickess of Eye of Knuckle Joint, The Thickness of eye of knuckle joint given Rod diameter is the thickness of the non-forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to calculate Thickness of Eye of Knuckle Joint given Rod Diameter using this online calculator? To use this online calculator for Thickness of Eye of Knuckle Joint given Rod Diameter, enter Diameter of Rod of Knuckle Joint (d_rk) and hit the calculate button. Here is how the Thickness of Eye of Knuckle Joint given Rod Diameter calculation can be explained with given input values -> 38750 = 1.25*0.031.

FAQ

What is Thickness of Eye of Knuckle Joint given Rod Diameter?

The Thickness of eye of knuckle joint given Rod diameter is the thickness of the non-forked part of a knuckle joint and is measured along the eye hole axis and is represented as b = 1.25*d_rk or Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint. Diameter of Rod of Knuckle Joint is defined as the diameter of the end rods of a knuckle joint.

How to calculate Thickness of Eye of Knuckle Joint given Rod Diameter?

The Thickness of eye of knuckle joint given Rod diameter is the thickness of the non-forked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint. To calculate Thickness of Eye of Knuckle Joint given Rod Diameter, you need Diameter of Rod of Knuckle Joint (d_rk). With our tool, you need to enter the respective value for Diameter of Rod of Knuckle Joint and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickess of Eye of Knuckle Joint?

In this formula, Thickess of Eye of Knuckle Joint uses Diameter of Rod of Knuckle Joint. We can use 4 other way(s) to calculate the same, which is/are as follows -

Thickess of Eye of Knuckle Joint = 4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = 4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickess of Eye of Knuckle Joint = Load on Knuckle Joint/(Shear Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Home

FREE PDFs

🔍 Search