Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork Calculator

✖Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.ⓘ Load on Knuckle Joint [L]			+10% -10%
✖Shear Stress in Fork of Knuckle Joint is the amount of shear stress induced into the forked part of a knuckle joint and may lead to failure parallel to the force application area.ⓘ Shear Stress in Fork of Knuckle Joint [τ_fork]			+10% -10%
✖Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.ⓘ Outer Diameter of Eye of Knuckle Joint [d_o]			+10% -10%
✖Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.ⓘ Diameter of Knuckle Pin [d]			+10% -10%

✖Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.ⓘ Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork [a]

⎘ Copy

👎

Formula

✖

Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork

Formula

`"a" = "L"/(2*"τ"_{"fork"}*("d"_{"o"}-"d"))`

Example

`"23.25581mm"="50000N"/(2*"25N/mm²"*("80mm"-"37mm"))`

Calculator

LaTeX

Reset

👍

Download Design of Knuckle Joint Formulas PDF PDF Image

Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork Solution

STEP 0: Pre-Calculation Summary

Formula Used

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
a = L/(2*τ_fork*(d_o-d))
This formula uses 5 Variables

Variables Used

Thickess of Fork Eye of Knuckle Joint - (Measured in Meter) - Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.
Load on Knuckle Joint - (Measured in Newton) - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.
Shear Stress in Fork of Knuckle Joint - (Measured in Pascal) - Shear Stress in Fork of Knuckle Joint is the amount of shear stress induced into the forked part of a knuckle joint and may lead to failure parallel to the force application area.
Outer Diameter of Eye of Knuckle Joint - (Measured in Meter) - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.
Diameter of Knuckle Pin - (Measured in Meter) - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

STEP 1: Convert Input(s) to Base Unit

Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Shear Stress in Fork of Knuckle Joint: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 37 Millimeter --> 0.037 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

a = L/(2*τ_fork*(d_o-d)) --> 50000/(2*25000000*(0.08-0.037))

Evaluating ... ...

a = 0.0232558139534884

STEP 3: Convert Result to Output's Unit

0.0232558139534884 Meter -->23.2558139534884 Millimeter (Check conversion here)

FINAL ANSWER

23.2558139534884 ≈ 23.25581 Millimeter <-- Thickess of Fork Eye of Knuckle Joint

(Calculation completed in 00.004 seconds)

You are here -

Home » Physics » Design of Machine Elements » Design of Coupling » Design of Knuckle Joint » Fork » Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork

Credits

Created by Saurabh Patil

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore

Saurabh Patil has created this Calculator and 700+ more calculators!

Verified by Anshika Arya

National Institute Of Technology (NIT), Hamirpur

Anshika Arya has verified this Calculator and 2500+ more calculators!

< 11 Fork Calculators

Thickness of Fork Eye of Knuckle Joint given Bending Stress in Pin

Go Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)

Thickness of Fork Eye of Knuckle Joint given Tensile Stress in Fork

Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Fork

Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin

Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork

Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Fork

Go Outer Diameter of Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*Thickess of Fork Eye of Knuckle Joint)+Diameter of Knuckle Pin

Outer Diameter of Eye of Knuckle Joint given Tensile Stress in Eye

Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Tensile Stress in Eye of Knuckle Joint)

Outer Diameter of Eye of Knuckle Joint given Shear Stress in Eye

Go Outer Diameter of Eye of Knuckle Joint = Diameter of Knuckle Pin+Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Shear Stress in Eye of Knuckle Joint)

Thickness of Fork Eye of Knuckle Joint given Bending Moment in Pin

Go Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)

Thickness of Fork Eye of Knuckle Joint given Compressive Stress in Pin Inside Fork End

Go Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)

Thickness of Fork Eye of Knuckle Joint given Rod Diameter

Go Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of Rod of Knuckle Joint

Outer Diameter of Eye of Knuckle Joint given Diameter of Pin

Go Outer Diameter of Eye of Knuckle Joint = 2*Diameter of Knuckle Pin

Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork Formula

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
a = L/(2*τ_fork*(d_o-d))

What is difference between crushing and buckling?

Crushing means breaking and failure of short column structure when subjected to high compressive stress and Buckling is failure of long column structure when subjected to high buckling stress.

How to Calculate Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork?

Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork calculator uses Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Thickess of Fork Eye of Knuckle Joint, The Thickness of fork eye of knuckle joint given shear stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Fork Eye of Knuckle Joint is denoted by a symbol.

How to calculate Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork using this online calculator? To use this online calculator for Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork, enter Load on Knuckle Joint (L), Shear Stress in Fork of Knuckle Joint (τ_fork), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork calculation can be explained with given input values -> 23255.81 = 50000/(2*25000000*(0.08-0.037)).

FAQ

What is Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork?

The Thickness of fork eye of knuckle joint given shear stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis and is represented as a = L/(2*τ_fork*(d_o-d)) or Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Shear Stress in Fork of Knuckle Joint is the amount of shear stress induced into the forked part of a knuckle joint and may lead to failure parallel to the force application area, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

How to calculate Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork?

The Thickness of fork eye of knuckle joint given shear stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). To calculate Thickness of Fork Eye of Knuckle Joint given Shear Stress in Fork, you need Load on Knuckle Joint (L), Shear Stress in Fork of Knuckle Joint (τ_fork), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Shear Stress in Fork of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Thickess of Fork Eye of Knuckle Joint?

In this formula, Thickess of Fork Eye of Knuckle Joint uses Load on Knuckle Joint, Shear Stress in Fork of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 5 other way(s) to calculate the same, which is/are as follows -

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Compressive Stress in Knuckle Pin*Diameter of Knuckle Pin)
Thickess of Fork Eye of Knuckle Joint = 3*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Eye of Knuckle Joint/4)
Thickess of Fork Eye of Knuckle Joint = 3*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Eye of Knuckle Joint/4)
Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of Rod of Knuckle Joint

Home

FREE PDFs

🔍 Search