Created by Saurabh Patil
Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
Verified by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2600+ more calculators!

Thickness of fork eye of knuckle joint given tensile stress in fork Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
a = L/(2*σt*(do-d))
This formula uses 4 Variables
Variables Used
Load on Knuckle Joint - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts. (Measured in Newton)
Tensile Stress in Fork of Knuckle Joint - Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure. (Measured in Newton per Square Millimeter)
Outer Diameter of Eye of Knuckle Joint - Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted. (Measured in Millimeter)
Diameter of Knuckle Pin - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint. (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Tensile Stress in Fork of Knuckle Joint: 25 Newton per Square Millimeter --> 25000000 Pascal (Check conversion here)
Outer Diameter of Eye of Knuckle Joint: 80 Millimeter --> 0.08 Meter (Check conversion here)
Diameter of Knuckle Pin: 38 Millimeter --> 0.038 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = L/(2*σt*(do-d)) --> 50000/(2*25000000*(0.08-0.038))
Evaluating ... ...
a = 0.0238095238095238
STEP 3: Convert Result to Output's Unit
0.0238095238095238 Meter -->23.8095238095238 Millimeter (Check conversion here)
FINAL ANSWER
23.8095238095238 Millimeter <-- Thickess of Fork Eye of Knuckle Joint
(Calculation completed in 00.016 seconds)

10+ Design of Knuckle Joint Calculators

Compressive stress in pin inside fork of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(2*(Thickess of Fork Eye of Knuckle Joint)*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given load and shear stress in pin
Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*(Shear Stress in Pin))) Go
Diameter of rod of knuckle joint given tensile stress in rod
Diameter of rod = sqrt((4*Load on Knuckle Joint)/(pi*(Tensile Stress In Rod))) Go
Compressive stress in pin inside eye of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given compressive stress in eye end portion of pin
Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Pin*Thickess of Eye of Knuckle Joint) Go
Length of pin of knuckle joint in contact with the eye end
Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin) Go
Shear stress in pin of knuckle joint given load and pin diameter
Shear Stress in Pin = (2*Load on Knuckle Joint)/(pi*(Diameter of Knuckle Pin^2)) Go
Tensile stress in rod of knuckle joint
Tensile Stress In Rod = (4*Load on Knuckle Joint)/(pi*(Diameter of rod^2)) Go
Diameter of rod of knuckle joint given its enlarged diameter near the joint
Diameter of rod = Enlarged Diameter of Rod/1.1 Go
Enlarged Diameter of rod of knuckle joint near the joint
Enlarged Diameter of Rod = 1.1*Diameter of rod Go

Thickness of fork eye of knuckle joint given tensile stress in fork Formula

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
a = L/(2*σt*(do-d))

Shear failure in beams

Shear failure occurs when the beam has shear resistance lower than flexural strength and the shear force exceeds the shear capacity of different materials of the beam. A shear load is a force that tends to produce a sliding failure on a material along a plane that is parallel to the direction of the force.
This type of failure is sudden and provides no warning i.e. brittle failure. The effective span to depth ratio of the beams and their size are important parameters in determining the type of shear failure. Shear failure is an undesired type of failure and commonly stirrups are placed in the beam to prevent the shear failure.

How to Calculate Thickness of fork eye of knuckle joint given tensile stress in fork?

Thickness of fork eye of knuckle joint given tensile stress in fork calculator uses Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to calculate the Thickess of Fork Eye of Knuckle Joint, The Thickness of fork eye of knuckle joint given tensile stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Fork Eye of Knuckle Joint is denoted by a symbol.

How to calculate Thickness of fork eye of knuckle joint given tensile stress in fork using this online calculator? To use this online calculator for Thickness of fork eye of knuckle joint given tensile stress in fork, enter Load on Knuckle Joint (L), Tensile Stress in Fork of Knuckle Joint t), Outer Diameter of Eye of Knuckle Joint (do) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of fork eye of knuckle joint given tensile stress in fork calculation can be explained with given input values -> 23.80952 = 50000/(2*25000000*(0.08-0.038)) .

FAQ

What is Thickness of fork eye of knuckle joint given tensile stress in fork?
The Thickness of fork eye of knuckle joint given tensile stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis and is represented as a = L/(2*σt*(do-d)) or Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) . Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure, Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
How to calculate Thickness of fork eye of knuckle joint given tensile stress in fork?
The Thickness of fork eye of knuckle joint given tensile stress in fork is the thickness of the forked part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) . To calculate Thickness of fork eye of knuckle joint given tensile stress in fork, you need Load on Knuckle Joint (L), Tensile Stress in Fork of Knuckle Joint t), Outer Diameter of Eye of Knuckle Joint (do) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Tensile Stress in Fork of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickess of Fork Eye of Knuckle Joint?
In this formula, Thickess of Fork Eye of Knuckle Joint uses Load on Knuckle Joint, Tensile Stress in Fork of Knuckle Joint, Outer Diameter of Eye of Knuckle Joint & Diameter of Knuckle Pin. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin)
  • Thickess of Fork Eye of Knuckle Joint = 3*((2*Bending Moment in Knuckle Pin/Load on Knuckle Joint)-(Thickess of Eye of Knuckle Joint/4))
  • Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4))
  • Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of rod
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!