🔍
🔍

## Credits

Kethavath Srinath has created this Calculator and 500+ more calculators!
Vishwakarma Government Engineering College (VGEC), Ahmedabad
Urvi Rathod has verified this Calculator and 1000+ more calculators!

STEP 0: Pre-Calculation Summary
Formula Used
rx = 1*P
This formula uses 1 Variables
Variables Used
Pitch - Pitch is the distance between screw threads and is commonly used with inch sized products and specified as threads per inch. (Measured in Meter)
STEP 1: Convert Input(s) to Base Unit
Pitch: 0.01 Meter --> 0.01 Meter No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
rx = 1*P --> 1*0.01
Evaluating ... ...
rx = 0.01
STEP 3: Convert Result to Output's Unit
0.01 Meter -->10 Millimeter (Check conversion here)
10 Millimeter <-- Tooth Side Radius
(Calculation completed in 00.005 seconds)

## < 10+ Design of Chain Drives Calculators

Number of Teeth on the Sprocket When Pitch Circle Diameter is Given
number_of_teeth = 180*(pi/180)*asin(Pitch Circle Diameter/Pitch) Go
Velocity Ratio of the Chain Drives
velocity_ratio = Angular speed of the driving member in rpm/Angular speed of the driven member in rpm Go
Number of Teeth on the Driven Sprocket When Velocity of the Chain Drives is Given
number_of_teeth_on_driven_sprocket = Number of Teeth on Driving Sprocket*Velocity ratio Go
Number of Teeth on Driving Sprocket When Velocity of the Chain Drives is Given
number_of_teeth_on_driving_sprocket = Number of Teeth on Driven Sprocket/Velocity ratio Go
Speed of Rotation of the Driving Shaft When Velocity Ratio of the Chain Drives is Given
angular_speed_driving_rpm = Velocity ratio*Angular speed of the driven member in rpm Go
Speed of Rotation of the Driven Shaft When Velocity Ratio of the Chain Drives is Given
angular_speed_driven_rpm = Angular speed of the driving member in rpm/Velocity ratio Go
Length of the Pitch When Pitch Circle Diameter is Given
pitch = Pitch Circle Diameter*sin(180/Number of teeth) Go
Pitch Circle Diameter in terms of Pitch
pitch_circle_diameter = Pitch/sin(180/Number of teeth) Go
Pitch Angle of the Sprocket
pitch_angle = 2*3.14/Number of teeth Go
Number of Teeth on the Sprocket When Pitch Angle of the Sprocket is Given
number_of_teeth = 360/Pitch Angle Go

rx = 1*P

## Define a Sprocket?

A sprocket, sprocket-wheel, or chainwheel is a profiled wheel with teeth, or cogs, that mesh with a chain, track, or other perforated or indented material. The name 'sprocket' applies generally to any wheel upon which radial projections engage a chain passing over it.

## How to Calculate Tooth Side Radius?

Tooth Side Radius calculator uses tooth_side_radius = 1*Pitch to calculate the Tooth Side Radius, The Tooth Side Radius formula is defined as the radius of the tooth or numerically equivalent to pitch. Tooth Side Radius and is denoted by rx symbol.

How to calculate Tooth Side Radius using this online calculator? To use this online calculator for Tooth Side Radius, enter Pitch (P) and hit the calculate button. Here is how the Tooth Side Radius calculation can be explained with given input values -> 10 = 1*0.01.

### FAQ

The Tooth Side Radius formula is defined as the radius of the tooth or numerically equivalent to pitch and is represented as rx = 1*P or tooth_side_radius = 1*Pitch. Pitch is the distance between screw threads and is commonly used with inch sized products and specified as threads per inch.
How to calculate Tooth Side Radius?
The Tooth Side Radius formula is defined as the radius of the tooth or numerically equivalent to pitch is calculated using tooth_side_radius = 1*Pitch. To calculate Tooth Side Radius, you need Pitch (P). With our tool, you need to enter the respective value for Pitch and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Tooth Side Radius?
In this formula, Tooth Side Radius uses Pitch. We can use 10 other way(s) to calculate the same, which is/are as follows -
• pitch_angle = 2*3.14/Number of teeth
• number_of_teeth = 360/Pitch Angle
• pitch_circle_diameter = Pitch/sin(180/Number of teeth)
• pitch = Pitch Circle Diameter*sin(180/Number of teeth)
• number_of_teeth = 180*(pi/180)*asin(Pitch Circle Diameter/Pitch)
• velocity_ratio = Angular speed of the driving member in rpm/Angular speed of the driven member in rpm
• angular_speed_driving_rpm = Velocity ratio*Angular speed of the driven member in rpm
• angular_speed_driven_rpm = Angular speed of the driving member in rpm/Velocity ratio
• number_of_teeth_on_driving_sprocket = Number of Teeth on Driven Sprocket/Velocity ratio
• number_of_teeth_on_driven_sprocket = Number of Teeth on Driving Sprocket*Velocity ratio
Where is the Tooth Side Radius calculator used?
Among many, Tooth Side Radius calculator is widely used in real life applications like {FormulaUses}. Here are few more real life examples -
{FormulaExamplesList}
Let Others Know