Weight of Fluid given Work Done if Jet leaves in Motion of Wheel Calculator

✖Work done by/on a system is energy transferred by/to the system to/from its surroundings.ⓘ Work Done [w]			+10% -10%
✖Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.ⓘ Specific Gravity of Fluid [G]			+10% -10%
✖The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.ⓘ Final Velocity [v_f]			+10% -10%
✖Initial Velocity is the velocity at which motion starts.ⓘ Initial Velocity [u]			+10% -10%
✖Velocity of Jet can be described as the movement of the plate in meters per second.ⓘ Velocity of Jet [v]			+10% -10%

✖Weight of Fluid is the weight of fluid in Newtons or Kilo newton.ⓘ Weight of Fluid given Work Done if Jet leaves in Motion of Wheel [w_f]

⎘ Copy

👎

Formula

✖

Weight of Fluid given Work Done if Jet leaves in Motion of Wheel

Formula

`"w"_{"f"} = ("w"*"G")/("v"_{"f"}*"u"-"v"*"v"_{"f"})`

Example

`"38.52232N"=("3.9KJ"*"10")/("40m/s"*"35m/s"-"9.69m/s"*"40m/s")`

Calculator

LaTeX

Reset

👍

Download Torque Exerted on a Wheel with Radial Curved Vanes Formulas PDF PDF Image

Weight of Fluid given Work Done if Jet leaves in Motion of Wheel Solution

STEP 0: Pre-Calculation Summary

Formula Used

Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity-Velocity of Jet*Final Velocity)
w_f = (w*G)/(v_f*u-v*v_f)
This formula uses 6 Variables

Variables Used

Weight of Fluid - (Measured in Newton) - Weight of Fluid is the weight of fluid in Newtons or Kilo newton.
Work Done - (Measured in Joule) - Work done by/on a system is energy transferred by/to the system to/from its surroundings.
Specific Gravity of Fluid - Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid.
Final Velocity - (Measured in Meter per Second) - The Final Velocity is the speed of a moving body after it has reached its maximum acceleration.
Initial Velocity - (Measured in Meter per Second) - Initial Velocity is the velocity at which motion starts.
Velocity of Jet - (Measured in Meter per Second) - Velocity of Jet can be described as the movement of the plate in meters per second.

STEP 1: Convert Input(s) to Base Unit

Work Done: 3.9 Kilojoule --> 3900 Joule (Check conversion here)
Specific Gravity of Fluid: 10 --> No Conversion Required
Final Velocity: 40 Meter per Second --> 40 Meter per Second No Conversion Required
Initial Velocity: 35 Meter per Second --> 35 Meter per Second No Conversion Required
Velocity of Jet: 9.69 Meter per Second --> 9.69 Meter per Second No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

w_f = (w*G)/(v_f*u-v*v_f) --> (3900*10)/(40*35-9.69*40)

Evaluating ... ...

w_f = 38.5223231924141

STEP 3: Convert Result to Output's Unit

38.5223231924141 Newton --> No Conversion Required

FINAL ANSWER

38.5223231924141 ≈ 38.52232 Newton <-- Weight of Fluid

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Hydraulics and Waterworks » Fundamentals of Fluid Flow » Torque Exerted on a Wheel with Radial Curved Vanes » Weight of the Fluid » Weight of Fluid given Work Done if Jet leaves in Motion of Wheel

Credits

Created by M Naveen

National Institute of Technology (NIT), Warangal

M Naveen has created this Calculator and 500+ more calculators!

Verified by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has verified this Calculator and 700+ more calculators!

< 9 Weight of the Fluid Calculators

Weight of Fluid for Work Done on Wheel per Second

Go Weight of Fluid = (Work Done*Specific Gravity of Fluid)/((Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet)*Angular Velocity)

Weight of Fluid given Power Delivered to Wheel

Go Weight of Fluid = (Power Delivered*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity+Velocity of Jet*Final Velocity)

Weight of Fluid given Work Done if Jet leaves in Motion of Wheel

Go Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity-Velocity of Jet*Final Velocity)

Weight of Fluid given Angular Momentum at Outlet

Go Weight of Fluid = (Tangential Momentum*Specific Gravity of Fluid)/(Velocity of Jet*Radius of Outlet)

Weight of Fluid given Angular Momentum at Inlet

Go Weight of Fluid = (Angular Momentum*Specific Gravity of Fluid)/(Final Velocity*Radius of wheel)

Weight of Fluid for Work Done if there is no loss of Energy

Go Weight of Fluid = (Work Done*2*Specific Gravity of Fluid)/(Final Velocity^2-Velocity of Jet^2)

Weight of Fluid when Work Done at Vane Angle is 90 and Velocity is Zero

Go Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity)

Weight of Fluid given Tangential Momentum of Fluid Striking Vanes at Inlet

Go Weight of Fluid = (Tangential Momentum*Specific Gravity of Fluid)/Final Velocity

Weight of Fluid given Mass of Fluid Striking Vane per Second

Go Weight of Fluid = Fluid Mass*Specific Gravity of Fluid

Weight of Fluid given Work Done if Jet leaves in Motion of Wheel Formula

Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity-Velocity of Jet*Final Velocity)
w_f = (w*G)/(v_f*u-v*v_f)

What is weight of fluid per unit volume?

The specific weight, also known as the unit weight, is the weight per unit volume of a material. A commonly used value is the specific weight of water on Earth at 4 °C (39 °F), which is 9.807 kilo newton per cubic meter or 62.43 pounds-force per cubic foot.

How to Calculate Weight of Fluid given Work Done if Jet leaves in Motion of Wheel?

Weight of Fluid given Work Done if Jet leaves in Motion of Wheel calculator uses Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity-Velocity of Jet*Final Velocity) to calculate the Weight of Fluid, The Weight of fluid given work done if jet leaves in motion of wheel is the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity. Weight of Fluid is denoted by w_f symbol.

How to calculate Weight of Fluid given Work Done if Jet leaves in Motion of Wheel using this online calculator? To use this online calculator for Weight of Fluid given Work Done if Jet leaves in Motion of Wheel, enter Work Done (w), Specific Gravity of Fluid (G), Final Velocity (v_f), Initial Velocity (u) & Velocity of Jet (v) and hit the calculate button. Here is how the Weight of Fluid given Work Done if Jet leaves in Motion of Wheel calculation can be explained with given input values -> 38.52232 = (3900*10)/(40*35-9.69*40).

FAQ

What is Weight of Fluid given Work Done if Jet leaves in Motion of Wheel?

The Weight of fluid given work done if jet leaves in motion of wheel is the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity and is represented as w_f = (w*G)/(v_f*u-v*v_f) or Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity-Velocity of Jet*Final Velocity). Work done by/on a system is energy transferred by/to the system to/from its surroundings, Specific Gravity of Fluid is the ratio of the specific weight of a substance to the specific weight of a standard fluid, The Final Velocity is the speed of a moving body after it has reached its maximum acceleration, Initial Velocity is the velocity at which motion starts & Velocity of Jet can be described as the movement of the plate in meters per second.

How to calculate Weight of Fluid given Work Done if Jet leaves in Motion of Wheel?

The Weight of fluid given work done if jet leaves in motion of wheel is the weight of a substance per unit volume in absolute units equal to the density multiplied by the acceleration of gravity is calculated using Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity-Velocity of Jet*Final Velocity). To calculate Weight of Fluid given Work Done if Jet leaves in Motion of Wheel, you need Work Done (w), Specific Gravity of Fluid (G), Final Velocity (v_f), Initial Velocity (u) & Velocity of Jet (v). With our tool, you need to enter the respective value for Work Done, Specific Gravity of Fluid, Final Velocity, Initial Velocity & Velocity of Jet and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Weight of Fluid?

In this formula, Weight of Fluid uses Work Done, Specific Gravity of Fluid, Final Velocity, Initial Velocity & Velocity of Jet. We can use 8 other way(s) to calculate the same, which is/are as follows -

Weight of Fluid = Fluid Mass*Specific Gravity of Fluid
Weight of Fluid = (Tangential Momentum*Specific Gravity of Fluid)/Final Velocity
Weight of Fluid = (Angular Momentum*Specific Gravity of Fluid)/(Final Velocity*Radius of wheel)
Weight of Fluid = (Tangential Momentum*Specific Gravity of Fluid)/(Velocity of Jet*Radius of Outlet)
Weight of Fluid = (Work Done*Specific Gravity of Fluid)/((Final Velocity*Radius of wheel+Velocity of Jet*Radius of Outlet)*Angular Velocity)
Weight of Fluid = (Power Delivered*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity+Velocity of Jet*Final Velocity)
Weight of Fluid = (Work Done*Specific Gravity of Fluid)/(Final Velocity*Initial Velocity)
Weight of Fluid = (Work Done*2*Specific Gravity of Fluid)/(Final Velocity^2-Velocity of Jet^2)

Home

FREE PDFs

🔍 Search