Angle of Contact for Open Belt Drive Solution

STEP 0: Pre-Calculation Summary
Formula Used
Angle of Contact = 180*pi/180-2*Angle Made By Belt With Vertical Axis
θc = 180*pi/180-2*α
This formula uses 1 Constants, 2 Variables
Constants Used
pi - Archimedes' constant Value Taken As 3.14159265358979323846264338327950288
Variables Used
Angle of Contact - (Measured in Radian) - The angle of contact is the angle subtended by the belt on the pulley.
Angle Made By Belt With Vertical Axis - (Measured in Radian) - Angle Made By Belt With Vertical Axis is the angle made by a line joining the center of the pulley to the belt with vertical axis.
STEP 1: Convert Input(s) to Base Unit
Angle Made By Belt With Vertical Axis: 0.523 Radian --> 0.523 Radian No Conversion Required
STEP 2: Evaluate Formula
Substituting Input Values in Formula
θc = 180*pi/180-2*α --> 180*pi/180-2*0.523
Evaluating ... ...
θc = 2.09559265358979
STEP 3: Convert Result to Output's Unit
2.09559265358979 Radian --> No Conversion Required
FINAL ANSWER
2.09559265358979 2.095593 Radian <-- Angle of Contact
(Calculation completed in 00.004 seconds)

Credits

Creator Image
Created by Anshika Arya
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has created this Calculator and 2000+ more calculators!
Verifier Image
Verified by Team Softusvista
Softusvista Office (Pune), India
Team Softusvista has verified this Calculator and 1100+ more calculators!

Belt Drive Calculators

Relation between Pitch and Pitch Circle Diameter of Chain Drive
​ Go Pitch Circle Diameter of Gear = Pitch of Chain Drive*cosec((180*pi/180)/Number of Teeth on Sprocket)
Torque Exerted on Driven Pulley
​ Go Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Follower/2
Torque Exerted on Driving Pulley
​ Go Torque Exerted on Pulley = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Diameter of Driver/2
Power Transmitted by Belt
​ Go Power Transmitted = (Tension in Tight Side of Belt-Tension in Slack Side of Belt)*Velocity of Belt

Angle of Contact for Open Belt Drive Formula

Angle of Contact = 180*pi/180-2*Angle Made By Belt With Vertical Axis
θc = 180*pi/180-2*α

What is the angle of contact?

The angle of contact is the angle subtended by the belt on the pulley is known as the angle of contact or arc of contact.

How to Calculate Angle of Contact for Open Belt Drive?

Angle of Contact for Open Belt Drive calculator uses Angle of Contact = 180*pi/180-2*Angle Made By Belt With Vertical Axis to calculate the Angle of Contact, Angle of Contact for Open Belt Drive formula is defined as the angle at which the belt leaves the pulley in an open belt drive system, playing a crucial role in determining the efficiency and performance of the system. Angle of Contact is denoted by θc symbol.

How to calculate Angle of Contact for Open Belt Drive using this online calculator? To use this online calculator for Angle of Contact for Open Belt Drive, enter Angle Made By Belt With Vertical Axis (α) and hit the calculate button. Here is how the Angle of Contact for Open Belt Drive calculation can be explained with given input values -> 2.095593 = 180*pi/180-2*0.523.

FAQ

What is Angle of Contact for Open Belt Drive?
Angle of Contact for Open Belt Drive formula is defined as the angle at which the belt leaves the pulley in an open belt drive system, playing a crucial role in determining the efficiency and performance of the system and is represented as θc = 180*pi/180-2*α or Angle of Contact = 180*pi/180-2*Angle Made By Belt With Vertical Axis. Angle Made By Belt With Vertical Axis is the angle made by a line joining the center of the pulley to the belt with vertical axis.
How to calculate Angle of Contact for Open Belt Drive?
Angle of Contact for Open Belt Drive formula is defined as the angle at which the belt leaves the pulley in an open belt drive system, playing a crucial role in determining the efficiency and performance of the system is calculated using Angle of Contact = 180*pi/180-2*Angle Made By Belt With Vertical Axis. To calculate Angle of Contact for Open Belt Drive, you need Angle Made By Belt With Vertical Axis (α). With our tool, you need to enter the respective value for Angle Made By Belt With Vertical Axis and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Angle of Contact?
In this formula, Angle of Contact uses Angle Made By Belt With Vertical Axis. We can use 1 other way(s) to calculate the same, which is/are as follows -
  • Angle of Contact = 180*pi/180+2*Angle Made By Belt With Vertical Axis
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!