Kethavath Srinath
Osmania University (OU), Hyderabad
Kethavath Srinath has created this Calculator and 400+ more calculators!
Mridul Sharma
Indian Institute of Information Technology (IIIT), Bhopal
Mridul Sharma has verified this Calculator and 200+ more calculators!

11 Other formulas that you can solve using the same Inputs

Shear Force in End Members at First Interior Support
moment=1.15*(Force*Length of Span^2)/2 GO
Negative Moment at Interior Faces of Exterior Supports where Support is a Spandrel Beam
moment=(Force*Length of Span^2)/24 GO
Negative Moment at Exterior Face of First Interior Support for More Than Two Spans
moment=(Force*Length of Span^2)/10 GO
Negative Moment at Interior Faces of Exterior Support where Support is a Column
moment=(Force*Length of Span^2)/12 GO
Positive Moment for End Spans if Discontinuous End is Integral with Support
moment=(Force*Length of Span^2)/14 GO
Positive Moment for End Spans if Discontinuous End is Unrestrained
moment=(Force*Length of Span^2)/11 GO
Negative Moment at Other Faces of Interior Supports
moment=(Force*Length of Span^2)/11 GO
Positive Moment for Interior Spans
moment=(Force*Length of Span^2)/16 GO
Negative Moment at Exterior Face of First Interior Support for Two Spans
moment=(Force*Length of Span^2)/9 GO
Shear Force at All Other Supports
moment=(Force*Length of Span^2)/2 GO
Depth of Roof and Floor Slabs
Depth=Length of Span/25 GO

6 Other formulas that calculate the same Output

Depth of Filter when Treatability Constant is Given
Depth=(ln(effluent bod/influent BOD)/(-1*Treatability constant*(Volumetric flow per unit area)^(-1*Empirical constant))) GO
Depth when the Neutral Axis Lies in the Flange
Depth=distance from surface to n-axis*constant beta one/(1.18*value of omega) GO
Depth of Penetration of eddy current into the charge
Depth=0.159*sqrt((Resistivity*1000000000)/(Relative Permeability*frequency)) GO
Depth of flow when inlet capacity for flow depth more than 1ft 5in is given
Depth=((inlet capacity/(0.6*Area))^2)*(1/(2*Acceleration Due To Gravity)) GO
Depth of Heavy Beams and Girders
Depth=(Length of Span/12)-(Length of Span/10) GO
Depth of Roof and Floor Slabs
Depth=Length of Span/25 GO

Depth of Light Beams Formula

Depth=Length of Span/15
d=I<sub>n/15
More formulas
Stress in Concrete GO
Bending Moment when Stress in Concrete is Given GO
Width of Beam when Stress in Concrete is Given GO
Depth of Beam when Stress in Concrete is Given GO
Stress in Steel When Cross-Sectional Reinforcing Tensile Area to Beam Area Ratio is Given GO
Stress in Steel GO
Depth of Roof and Floor Slabs GO
Depth of Heavy Beams and Girders GO

Define Beam?

A beam is a structural element that primarily resists loads applied laterally to the beam's axis. Its mode of deflection is primarily by bending. The loads applied to the beam result in reaction forces at the beam's support points. The total effect of all the forces acting on the beam is to produce shear forces and bending moments within the beams, that in turn induce internal stresses, strains and deflections of the beam.

How to Calculate Depth of Light Beams?

Depth of Light Beams calculator uses Depth=Length of Span/15 to calculate the Depth, The Depth of Light Beams formula is defined as the distance from the top or surface to the bottom of Light beams. Depth and is denoted by d symbol.

How to calculate Depth of Light Beams using this online calculator? To use this online calculator for Depth of Light Beams, enter Length of Span (In) and hit the calculate button. Here is how the Depth of Light Beams calculation can be explained with given input values -> 0.066667 = 0.01/15.

FAQ

What is Depth of Light Beams?
The Depth of Light Beams formula is defined as the distance from the top or surface to the bottom of Light beams and is represented as d=In/15 or Depth=Length of Span/15. Length of Span refers to the length of the opening above which the beam is spanning.
How to calculate Depth of Light Beams?
The Depth of Light Beams formula is defined as the distance from the top or surface to the bottom of Light beams is calculated using Depth=Length of Span/15. To calculate Depth of Light Beams, you need Length of Span (In). With our tool, you need to enter the respective value for Length of Span and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Depth?
In this formula, Depth uses Length of Span. We can use 6 other way(s) to calculate the same, which is/are as follows -
  • Depth=Length of Span/25
  • Depth=(Length of Span/12)-(Length of Span/10)
  • Depth=distance from surface to n-axis*constant beta one/(1.18*value of omega)
  • Depth=((inlet capacity/(0.6*Area))^2)*(1/(2*Acceleration Due To Gravity))
  • Depth=0.159*sqrt((Resistivity*1000000000)/(Relative Permeability*frequency))
  • Depth=(ln(effluent bod/influent BOD)/(-1*Treatability constant*(Volumetric flow per unit area)^(-1*Empirical constant)))
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!