Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake Solution

STEP 0: Pre-Calculation Summary
Formula Used
Horizontal Distance of C.G. from Rear Axle = Vehicle Wheelbase-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road))
x = b-μ*h-(RR*b)/(W*cos(θ))
This formula uses 1 Functions, 7 Variables
Functions Used
cos - Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle., cos(Angle)
Variables Used
Horizontal Distance of C.G. from Rear Axle - (Measured in Meter) - Horizontal Distance of C.G. from rear Axle is the distance of vehicle's center of gravity (C.G.) form rear axle measured along wheelbase of vehicle.
Vehicle Wheelbase - (Measured in Meter) - Vehicle Wheelbase is the center distance between the front and the rear axle of the vehicle.
Friction Coefficient between Wheels and Ground - Friction Coefficient between Wheels and Ground is the friction coefficient which is generated between wheels and ground when the brakes are applied.
Height of Center of Gravity (C.G.) of Vehicle - (Measured in Meter) - Height of Center of Gravity (C.G.) of Vehicle is the theoretical point where the sum of all of the masses of each of its individual components effectively act.
Normal Reaction at Rear Wheel - (Measured in Newton) - Normal Reaction at Rear Wheel is the reaction force offered by the ground surface onto the rear wheel.
Vehicle Weight - (Measured in Newton) - Vehicle Weight is the heaviness of the vehicle, generally expressed in Newtons.
Inclination Angle of Road - (Measured in Radian) - Inclination Angle of Road is the angle which the road surface is making with the horizontal.
STEP 1: Convert Input(s) to Base Unit
Vehicle Wheelbase: 2.8 Meter --> 2.8 Meter No Conversion Required
Friction Coefficient between Wheels and Ground: 0.49 --> No Conversion Required
Height of Center of Gravity (C.G.) of Vehicle: 0.065 Meter --> 0.065 Meter No Conversion Required
Normal Reaction at Rear Wheel: 6332.83 Newton --> 6332.83 Newton No Conversion Required
Vehicle Weight: 11000 Newton --> 11000 Newton No Conversion Required
Inclination Angle of Road: 5 Degree --> 0.0872664625997001 Radian (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
x = b-μ*h-(RR*b)/(W*cos(θ)) --> 2.8-0.49*0.065-(6332.83*2.8)/(11000*cos(0.0872664625997001))
Evaluating ... ...
x = 1.14999935736264
STEP 3: Convert Result to Output's Unit
1.14999935736264 Meter --> No Conversion Required
FINAL ANSWER
1.14999935736264 1.149999 Meter <-- Horizontal Distance of C.G. from Rear Axle
(Calculation completed in 00.020 seconds)

Credits

National Institute of Technology Calicut (NIT Calicut), Calicut, Kerala
Peri Krishna Karthik has created this Calculator and 200+ more calculators!
Verified by sanjay shiva
national institute of technology hamirpur (NITH ), hamirpur , himachal pradesh
sanjay shiva has verified this Calculator and 100+ more calculators!

7 Effects on Rear Wheel Calculators

Wheel Base with All Wheel Braking on Rear Wheel
Go Vehicle Wheelbase = (Vehicle Weight*cos(Inclination Angle of Road)*(Horizontal Distance of C.G. from Rear Axle+Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle))/(Vehicle Weight*cos(Inclination Angle of Road)-Normal Reaction at Rear Wheel)
Slope of Road from Braking with Rear Wheel Reaction
Go Inclination Angle of Road = acos(Normal Reaction at Rear Wheel/(Vehicle Weight*(Vehicle Wheelbase-Horizontal Distance of C.G. from Rear Axle-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)/(Vehicle Wheelbase)))
Friction Coefficient between Wheel and Road Surface with Rear Wheel Brake
Go Friction Coefficient between Wheels and Ground = (Vehicle Wheelbase-Horizontal Distance of C.G. from Rear Axle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road)))/Height of Center of Gravity (C.G.) of Vehicle
Height of C.G. from Road Surface with Rear Wheel Brake
Go Height of Center of Gravity (C.G.) of Vehicle = (Vehicle Wheelbase-Horizontal Distance of C.G. from Rear Axle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road)))/Friction Coefficient between Wheels and Ground
Vehicle Weight with All Wheel Brake on Rear Wheel
Go Vehicle Weight = Normal Reaction at Rear Wheel/((Vehicle Wheelbase-Horizontal Distance of C.G. from Rear Axle-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase))
Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake
Go Horizontal Distance of C.G. from Rear Axle = Vehicle Wheelbase-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road))
Rear Wheel Reaction with All Wheel Braking
Go Normal Reaction at Rear Wheel = Vehicle Weight*(Vehicle Wheelbase-Horizontal Distance of C.G. from Rear Axle-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle)*cos(Inclination Angle of Road)/(Vehicle Wheelbase)

Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake Formula

Horizontal Distance of C.G. from Rear Axle = Vehicle Wheelbase-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road))
x = b-μ*h-(RR*b)/(W*cos(θ))

How weight transfer occurs during braking?

The inertial force acts at the centre of gravity of the vehicle, while the retarding force due to the application of brakes acts at the road surface. These two forms an overturning couple. This overturning couple increases the perpendicular force between the front wheels and ground by an amount, while the perpendicular force between rear wheels and ground is decreased by an equal amount. Some of the vehicle weight is thus transferred from the rear to the front axle.

How does the braking distribution occurs among front and rear brakes?

It is observed that in vehicles either the distribution of weight over the two axles is equal, or the front axle carries more weight, the braking effect has to be more at the front wheels for efficient braking. It is seen that in general for achieving maximum efficiency, about 75% of the total braking effect should be on front wheels. However, in such case the trouble would arise while travelling over wet road. where hight braking effect at the front would cause skidding of front wheels, because of decrease of weight transfer. In practice, about 60% of the braking effort is applied on the front wheels.

How to Calculate Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake?

Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake calculator uses Horizontal Distance of C.G. from Rear Axle = Vehicle Wheelbase-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road)) to calculate the Horizontal Distance of C.G. from Rear Axle, Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake formula is used to find the distance of the vehicle's center of gravity(C.G.) from the rear axle measured along with the wheelbase of the vehicle. Horizontal Distance of C.G. from Rear Axle is denoted by x symbol.

How to calculate Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake using this online calculator? To use this online calculator for Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake, enter Vehicle Wheelbase (b), Friction Coefficient between Wheels and Ground (μ), Height of Center of Gravity (C.G.) of Vehicle (h), Normal Reaction at Rear Wheel (RR), Vehicle Weight (W) & Inclination Angle of Road (θ) and hit the calculate button. Here is how the Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake calculation can be explained with given input values -> 1.398946 = 2.8-0.49*0.065-(6332.83*2.8)/(11000*cos(0.0872664625997001)).

FAQ

What is Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake?
Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake formula is used to find the distance of the vehicle's center of gravity(C.G.) from the rear axle measured along with the wheelbase of the vehicle and is represented as x = b-μ*h-(RR*b)/(W*cos(θ)) or Horizontal Distance of C.G. from Rear Axle = Vehicle Wheelbase-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road)). Vehicle Wheelbase is the center distance between the front and the rear axle of the vehicle, Friction Coefficient between Wheels and Ground is the friction coefficient which is generated between wheels and ground when the brakes are applied, Height of Center of Gravity (C.G.) of Vehicle is the theoretical point where the sum of all of the masses of each of its individual components effectively act, Normal Reaction at Rear Wheel is the reaction force offered by the ground surface onto the rear wheel, Vehicle Weight is the heaviness of the vehicle, generally expressed in Newtons & Inclination Angle of Road is the angle which the road surface is making with the horizontal.
How to calculate Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake?
Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake formula is used to find the distance of the vehicle's center of gravity(C.G.) from the rear axle measured along with the wheelbase of the vehicle is calculated using Horizontal Distance of C.G. from Rear Axle = Vehicle Wheelbase-Friction Coefficient between Wheels and Ground*Height of Center of Gravity (C.G.) of Vehicle-(Normal Reaction at Rear Wheel*Vehicle Wheelbase)/(Vehicle Weight*cos(Inclination Angle of Road)). To calculate Horizontal Distance of C.G from Rear Axle with Rear Wheel Brake, you need Vehicle Wheelbase (b), Friction Coefficient between Wheels and Ground (μ), Height of Center of Gravity (C.G.) of Vehicle (h), Normal Reaction at Rear Wheel (RR), Vehicle Weight (W) & Inclination Angle of Road (θ). With our tool, you need to enter the respective value for Vehicle Wheelbase, Friction Coefficient between Wheels and Ground, Height of Center of Gravity (C.G.) of Vehicle, Normal Reaction at Rear Wheel, Vehicle Weight & Inclination Angle of Road and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!