Runway Take off Length Corrected for Elevation Calculator

✖Takeoff Run is the distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.ⓘ Takeoff Run [TOR]			+10% -10%
✖Runway Elevation at the aerodrome is the elevation of the highest point on any of the runways of the airport.ⓘ Runway Elevation [R_e]			+10% -10%

✖Runway Take off Length Corrected for Elevation, slope and Temperature.ⓘ Runway Take off Length Corrected for Elevation [T_c]

⎘ Copy

👎

Formula

✖

Runway Take off Length Corrected for Elevation

Formula

`"T"_{"c"} = ("TOR"*0.07*("R"_{"e"}/300))+"TOR"`

Example

`"3361.386m"=("3352m"*0.07*("12m"/300))+"3352m"`

Calculator

LaTeX

Reset

👍

Download Aircraft Runway Length Estimation Formulas PDF

Runway Take off Length Corrected for Elevation Solution

STEP 0: Pre-Calculation Summary

Formula Used

Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run
T_c = (TOR*0.07*(R_e/300))+TOR
This formula uses 3 Variables

Variables Used

Runway Take off Length Corrected - (Measured in Meter) - Runway Take off Length Corrected for Elevation, slope and Temperature.
Takeoff Run - (Measured in Meter) - Takeoff Run is the distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water.
Runway Elevation - (Measured in Meter) - Runway Elevation at the aerodrome is the elevation of the highest point on any of the runways of the airport.

STEP 1: Convert Input(s) to Base Unit

Takeoff Run: 3352 Meter --> 3352 Meter No Conversion Required
Runway Elevation: 12 Meter --> 12 Meter No Conversion Required

STEP 2: Evaluate Formula

Substituting Input Values in Formula

T_c = (TOR*0.07*(R_e/300))+TOR --> (3352*0.07*(12/300))+3352

Evaluating ... ...

T_c = 3361.3856

STEP 3: Convert Result to Output's Unit

3361.3856 Meter --> No Conversion Required

FINAL ANSWER

3361.3856 ≈ 3361.386 Meter <-- Runway Take off Length Corrected

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Transportation Engineering » Airport Planning and Design » Aircraft Runway Length Estimation » Runway Takeoff Length » Runway Take off Length Corrected for Elevation

Credits

Created by Mithila Muthamma PA

Coorg Institute of Technology (CIT), Coorg

Mithila Muthamma PA has created this Calculator and 2000+ more calculators!

Verified by Chandana P Dev

NSS College of Engineering (NSSCE), Palakkad

Chandana P Dev has verified this Calculator and 1700+ more calculators!

< 6 Runway Takeoff Length Calculators

Aerodrome Reference Temperature given Corrected Take off Length

Go Aerodrome Reference Temperature = ((Corrected Takeoff Run-Runway Take off Length Corrected)/(Runway Take off Length Corrected*0.01))+Standard Temperature

Runway Takeoff Length Corrected for Elevation and Temperature

Go Corrected Takeoff Run = (Runway Take off Length Corrected*(Aerodrome Reference Temperature-Standard Temperature)*0.01)+Runway Take off Length Corrected

Runway Slope about Take-off Length Corrected for Elevation, Temperature and Slope

Go Runway Slope = (Corrected Runway Takeoff Length-Corrected Takeoff Run)/(Corrected Takeoff Run*0.1)

Runway Take off Length Corrected for Elevation, Temperature and Slope

Go Corrected Runway Takeoff Length = (Corrected Takeoff Run*Runway Slope*0.1)+Corrected Takeoff Run

Runway Elevation given Runway Take off Length Corrected for Elevation

Go Runway Elevation = ((Runway Take off Length Corrected-Takeoff Run)/(Takeoff Run*0.07))*300

Runway Take off Length Corrected for Elevation

Go Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run

Runway Take off Length Corrected for Elevation Formula

Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run
T_c = (TOR*0.07*(R_e/300))+TOR

What is Lift Force?

Lift is the force that directly opposes the weight of an airplane and holds the airplane in the air. Lift is a mechanical aerodynamic force produced by the motion of the airplane through the air. Because lift is a force, it is a vector quantity, having both a magnitude and a direction associated with it.

What is a normal takeoff?

A normal takeoff is one in which the airplane is headed into the wind, or the wind is very light. Also, the takeoff surface is firm and of sufficient length to permit the airplane to gradually accelerate to normal lift-off and climb-out speed, and there are no obstructions along the takeoff path.

How to Calculate Runway Take off Length Corrected for Elevation?

Runway Take off Length Corrected for Elevation calculator uses Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run to calculate the Runway Take off Length Corrected, Runway Take off Length Corrected for Elevation is defined as the distance from the point at which the takeoff run is initiated to the point where the aircraft has reached an altitude for corrected elevation. Runway Take off Length Corrected is denoted by T_c symbol.

How to calculate Runway Take off Length Corrected for Elevation using this online calculator? To use this online calculator for Runway Take off Length Corrected for Elevation, enter Takeoff Run (TOR) & Runway Elevation (R_e) and hit the calculate button. Here is how the Runway Take off Length Corrected for Elevation calculation can be explained with given input values -> 3361.386 = (3352*0.07*(12/300))+3352.

FAQ

What is Runway Take off Length Corrected for Elevation?

Runway Take off Length Corrected for Elevation is defined as the distance from the point at which the takeoff run is initiated to the point where the aircraft has reached an altitude for corrected elevation and is represented as T_c = (TOR*0.07*(R_e/300))+TOR or Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run. Takeoff Run is the distance traveled by an airplane from the commencement of takeoff to the point when it leaves the ground or water & Runway Elevation at the aerodrome is the elevation of the highest point on any of the runways of the airport.

How to calculate Runway Take off Length Corrected for Elevation?

Runway Take off Length Corrected for Elevation is defined as the distance from the point at which the takeoff run is initiated to the point where the aircraft has reached an altitude for corrected elevation is calculated using Runway Take off Length Corrected = (Takeoff Run*0.07*(Runway Elevation/300))+Takeoff Run. To calculate Runway Take off Length Corrected for Elevation, you need Takeoff Run (TOR) & Runway Elevation (R_e). With our tool, you need to enter the respective value for Takeoff Run & Runway Elevation and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

Home

FREE PDFs

🔍 Search