Volume of Tank given MLSS Calculator

✖Total microbial mass in the system in grams.ⓘ Total Microbial Mass [M_t]			+10% -10%
✖Sewage flow into the aeration tank is the sewage flow into the aeration tank when we have prior information of other parameters used.ⓘ Sewage Flow [Q]			+10% -10%
✖Influent BOD is the total amount of BOD which is present in the incoming sewage.ⓘ Influent BOD [Q_i]			+10% -10%
✖MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics).ⓘ MLSS [X]			+10% -10%
✖Daily bod load applied to the aeration system.ⓘ Daily bod [BOD]			+10% -10%

✖Volume of tank is defined as the capacity of flocculation and mixing tank.ⓘ Volume of Tank given MLSS [V]

⎘ Copy

👎

Formula

✖

Volume of Tank given MLSS

Formula

`"V" = ("M"_{"t"}*"Q"*"Q"_{"i"})/("X"*"BOD")`

Example

`"186.6667m³"=("3g"*"20m³"*"11.2mg/L")/("1200mg/L"*"3mg")`

Calculator

LaTeX

Reset

👍

Download Environmental Engineering Formula PDF PDF Image

Volume of Tank given MLSS Solution

STEP 0: Pre-Calculation Summary

Formula Used

Volume of Tank = (Total Microbial Mass*Sewage Flow*Influent BOD)/(MLSS*Daily bod)
V = (M_t*Q*Q_i)/(X*BOD)
This formula uses 6 Variables

Variables Used

Volume of Tank - (Measured in Cubic Meter) - Volume of tank is defined as the capacity of flocculation and mixing tank.
Total Microbial Mass - (Measured in Kilogram) - Total microbial mass in the system in grams.
Sewage Flow - (Measured in Cubic Meter) - Sewage flow into the aeration tank is the sewage flow into the aeration tank when we have prior information of other parameters used.
Influent BOD - (Measured in Kilogram per Cubic Meter) - Influent BOD is the total amount of BOD which is present in the incoming sewage.
MLSS - (Measured in Kilogram per Cubic Meter) - MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics).
Daily bod - (Measured in Kilogram) - Daily bod load applied to the aeration system.

STEP 1: Convert Input(s) to Base Unit

Total Microbial Mass: 3 Gram --> 0.003 Kilogram (Check conversion here)
Sewage Flow: 20 Cubic Meter --> 20 Cubic Meter No Conversion Required
Influent BOD: 11.2 Milligram per Liter --> 0.0112 Kilogram per Cubic Meter (Check conversion here)
MLSS: 1200 Milligram per Liter --> 1.2 Kilogram per Cubic Meter (Check conversion here)
Daily bod: 3 Milligram --> 3E-06 Kilogram (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

V = (M_t*Q*Q_i)/(X*BOD) --> (0.003*20*0.0112)/(1.2*3E-06)

Evaluating ... ...

V = 186.666666666667

STEP 3: Convert Result to Output's Unit

186.666666666667 Cubic Meter --> No Conversion Required

FINAL ANSWER

186.666666666667 ≈ 186.6667 Cubic Meter <-- Volume of Tank

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Civil » Environmental Engineering » Treatment of Sewage » Food to Microorganism Ratio or F/M Ratio » Volume of Tank given MLSS

Credits

Created by Suraj Kumar

Birsa Institute of Technology (BIT), Sindri

Suraj Kumar has created this Calculator and 2200+ more calculators!

Verified by Ishita Goyal

Meerut Institute of Engineering and Technology (MIET), Meerut

Ishita Goyal has verified this Calculator and 2600+ more calculators!

< 20 Food to Microorganism Ratio or F/M Ratio Calculators

Microbial Mass in Aeration System given MLSS

Go Total Microbial Mass = Daily bod/((Sewage Flow*Influent BOD)/(Volume of Tank*MLSS))

BOD Load Applied given MLSS

Go Daily bod = Total Microbial Mass*((Sewage Flow*Influent BOD)/(Volume of Tank*MLSS))

MLSS given BOD Load Applied to Aeration System

Go MLSS = (Total Microbial Mass*Sewage Flow*Influent BOD)/(Volume of Tank*Daily bod)

Volume of Tank given MLSS

Go Volume of Tank = (Total Microbial Mass*Sewage Flow*Influent BOD)/(MLSS*Daily bod)

BOD Influent given MLSS

Go Influent BOD = (Daily bod*MLSS*Volume of Tank)/(Total Microbial Mass*Sewage Flow)

Sewage Flow given MLSS

Go Sewage Flow = (Daily bod*MLSS*Volume of Tank)/(Total Microbial Mass*Influent BOD)

Biological Oxygen Demand influent

Go Biological oxygen demand = (Food to microorganism ratio*Volume of Tank*MLSS)/Sewage Flow

Volume of Tank given Food to Microorganism Ratio

Go Volume of Tank = (Sewage Flow*Influent BOD)/(Food to microorganism ratio*MLSS)

Food to Microorganism Ratio given MLSS

Go Food to microorganism ratio = (Sewage Flow*Influent BOD)/(MLSS*Volume of Tank)

Mixed Liquor Suspended Solid

Go MLSS = (Sewage Flow*Influent BOD)/(Food to microorganism ratio*Volume of Tank)

Sewage Flow given Food to Microorganism Ratio

Go Sewage Flow = (Food to microorganism ratio*Volume of Tank*MLSS)/Influent BOD

Total Microbial Mass given Food to Microorganism Ratio

Go Total Microbial Mass = Daily bod/Food to microorganism ratio

Daily BOD Load given Food to Microorganism Ratio

Go Daily bod = Food to microorganism ratio*Total Microbial Mass

Food to Microorganism Ratio

Go Food to microorganism ratio = Daily bod/Total Microbial Mass

MLSS given Microbial Mass in Aeration System

Go MLSS = (Total Microbial Mass/Volume of Tank)

Volume of Tank given Microbial Mass in Aeration System

Go Volume of Tank = Total Microbial Mass/MLSS

Microbial Mass in Aeration System

Go Total Microbial Mass = MLSS*Volume of Tank

Sewage Flow into Aeration System given BOD Load applied

Go Sewage Flow = Daily bod/Influent BOD

BOD of Influent Sewage given BOD Load applied

Go Influent BOD = Daily bod/Sewage Flow

BOD Load applied to Aeration System

Go Daily bod = Sewage Flow*Influent BOD

Volume of Tank given MLSS Formula

Volume of Tank = (Total Microbial Mass*Sewage Flow*Influent BOD)/(MLSS*Daily bod)
V = (M_t*Q*Q_i)/(X*BOD)

What is BOD ?

Biochemical oxygen demand is the amount of dissolved oxygen needed by aerobic biological organisms to break down organic material present in a given water sample at certain temperature over a specific time period.

How to Calculate Volume of Tank given MLSS?

Volume of Tank given MLSS calculator uses Volume of Tank = (Total Microbial Mass*Sewage Flow*Influent BOD)/(MLSS*Daily bod) to calculate the Volume of Tank, Volume of Tank given MLSS calculates volume of tank when we have prior information of other parameters used. Volume of Tank is denoted by V symbol.

How to calculate Volume of Tank given MLSS using this online calculator? To use this online calculator for Volume of Tank given MLSS, enter Total Microbial Mass (M_t), Sewage Flow (Q), Influent BOD (Q_i), MLSS (X) & Daily bod (BOD) and hit the calculate button. Here is how the Volume of Tank given MLSS calculation can be explained with given input values -> 186.6667 = (0.003*20*0.0112)/(1.2*3E-06).

FAQ

What is Volume of Tank given MLSS?

Volume of Tank given MLSS calculates volume of tank when we have prior information of other parameters used and is represented as V = (M_t*Q*Q_i)/(X*BOD) or Volume of Tank = (Total Microbial Mass*Sewage Flow*Influent BOD)/(MLSS*Daily bod). Total microbial mass in the system in grams, Sewage flow into the aeration tank is the sewage flow into the aeration tank when we have prior information of other parameters used, Influent BOD is the total amount of BOD which is present in the incoming sewage, MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics) & Daily bod load applied to the aeration system.

How to calculate Volume of Tank given MLSS?

Volume of Tank given MLSS calculates volume of tank when we have prior information of other parameters used is calculated using Volume of Tank = (Total Microbial Mass*Sewage Flow*Influent BOD)/(MLSS*Daily bod). To calculate Volume of Tank given MLSS, you need Total Microbial Mass (M_t), Sewage Flow (Q), Influent BOD (Q_i), MLSS (X) & Daily bod (BOD). With our tool, you need to enter the respective value for Total Microbial Mass, Sewage Flow, Influent BOD, MLSS & Daily bod and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Volume of Tank?

In this formula, Volume of Tank uses Total Microbial Mass, Sewage Flow, Influent BOD, MLSS & Daily bod. We can use 2 other way(s) to calculate the same, which is/are as follows -

Volume of Tank = Total Microbial Mass/MLSS
Volume of Tank = (Sewage Flow*Influent BOD)/(Food to microorganism ratio*MLSS)

Home

FREE PDFs

🔍 Search