Infeed given Diameter of wheel and average length of chip Calculator

✖Average Chip Length is the undeformed chip length during grinding operation.ⓘ Average Chip Length [l_c]			+10% -10%
✖The Diameter of Grinding Tool Wheel is the diameter of the wheel used for the grinding.ⓘ Diameter of Grinding Tool Wheel [d_t]			+10% -10%

✖Infeed in Grinding Machine refers to feeding a grinding wheel into a workpiece while holding the part stationary.ⓘ Infeed given Diameter of wheel and average length of chip [f_in]

⎘ Copy

👎

Formula

✖

Infeed given Diameter of wheel and average length of chip

Formula

`"f"_{"in"} = ("l"_{" c"}^2)/"d"_{"t"}`

Example

`"2.098117mm"=(("20.269mm")^2)/"195.81mm"`

Calculator

LaTeX

Reset

👍

Download Production Engineering Formula PDF PDF Image

Infeed given Diameter of wheel and average length of chip Solution

STEP 0: Pre-Calculation Summary

Formula Used

Infeed in Grinding Machine = (Average Chip Length^2)/Diameter of Grinding Tool Wheel
f_in = (l_c^2)/d_t
This formula uses 3 Variables

Variables Used

Infeed in Grinding Machine - (Measured in Meter) - Infeed in Grinding Machine refers to feeding a grinding wheel into a workpiece while holding the part stationary.
Average Chip Length - (Measured in Meter) - Average Chip Length is the undeformed chip length during grinding operation.
Diameter of Grinding Tool Wheel - (Measured in Meter) - The Diameter of Grinding Tool Wheel is the diameter of the wheel used for the grinding.

STEP 1: Convert Input(s) to Base Unit

Average Chip Length: 20.269 Millimeter --> 0.020269 Meter (Check conversion here)
Diameter of Grinding Tool Wheel: 195.81 Millimeter --> 0.19581 Meter (Check conversion here)

STEP 2: Evaluate Formula

Substituting Input Values in Formula

f_in = (l_c^2)/d_t --> (0.020269^2)/0.19581

Evaluating ... ...

f_in = 0.002098117363771

STEP 3: Convert Result to Output's Unit

0.002098117363771 Meter -->2.098117363771 Millimeter (Check conversion here)

FINAL ANSWER

2.098117363771 ≈ 2.098117 Millimeter <-- Infeed in Grinding Machine

(Calculation completed in 00.004 seconds)

You are here -

Home » Engineering » Production Engineering » Metal Machining » Machine Tools and Operations » Grinding Operation » Material Removed » Grinding Chip » Infeed given Diameter of wheel and average length of chip

Credits

Created by Parul Keshav

National Institute of Technology (NIT), Srinagar

Parul Keshav has created this Calculator and 300+ more calculators!

Verified by Kumar Siddhant

Indian Institute of Information Technology, Design and Manufacturing (IIITDM), Jabalpur

Kumar Siddhant has verified this Calculator and 100+ more calculators!

< 18 Grinding Chip Calculators

Maximum undeformed chip thickness given constant for grinding wheel

Go Maximum Undeformed Chip Width in Grinding = sqrt(Constant for Grinding Wheel*Surface Speed of Workpiece in Grinding*(sqrt(Infeed in Grinding Machine))/Surface Speed of Grinding Wheel)

Width of grinding path given Number of chips produced per time

Go Width of Grinding Path = Number of Chip Produced per Unit Time/(Surface Speed of Grinding Wheel*Number of Active Grains per Area on Wheel Surface)

Number of chip produced per unit time in Grinding

Go Number of Chip Produced per Unit Time = Surface Speed of Grinding Wheel*Width of Grinding Path*Number of Active Grains per Area on Wheel Surface

Average length of Chip given Average volume of each Chip

Go Average Length of Chip = (6*Average volume of each Chip)/(Maximum width of chip in Grinding*Maximum Undeformed Chip Thickness in Grinding)

Maximum Width of Chip given Average volume of each Chip

Go Maximum width of chip in Grinding = (6*Average volume of each Chip)/(Maximum Undeformed Chip Thickness in Grinding*Average Length of Chip)

Maximum undeformed chip thickness given average volume of each chip

Go Maximum Undeformed Chip Thickness in Grinding = 6*Average volume of each Chip/(Maximum width of chip in Grinding*Average Length of Chip)

Average Volume of each Chip

Go Average volume of each Chip = Maximum width of chip in Grinding*Maximum Undeformed Chip Thickness in Grinding*Average Length of Chip/6

Angle made by length of chip given Infeed

Go Angle made by the length of the chip = acos(1-(2*Infeed in Grinding Machine/Diameter of Grinding Tool Wheel))

Infeed for given Angle made by length of chip

Go Infeed in Grinding Machine = (1-cos(Angle made by the length of the chip))*Diameter of Grinding Tool Wheel/2

Angle made by length of chip

Go Angle made by the length of the chip = asin(2*Average Length of Chip/Diameter of Grinding Tool Wheel)

Average length of chip

Go Average Length of Chip = Diameter of Grinding Tool Wheel*sin(Angle made by the length of the chip)/2

Average length of chip given Infeed

Go Average Chip Length = sqrt(Infeed in Grinding Machine*Diameter of Grinding Tool Wheel)

Maximum Width of Chip given Max undeformed Chip thickness

Go Maximum width of chip in Grinding = Grain aspect ratio in Grinding*Maximum Undeformed Chip Thickness in Grinding

Maximum undeformed chip thickness

Go Maximum Undeformed Chip Thickness in Grinding = Maximum width of chip in Grinding/Grain aspect ratio in Grinding

Metal removal rate given number of chip produced and volume of each chip

Go Material Removal Rate = Number of Chip Produced per Unit Time*Average Volume of Each Chip in Grinding

Average Volume of each chip given metal removal rate in grinding

Go Average Volume of Each Chip in Grinding = Material Removal Rate/Number of Chip Produced per Unit Time

Number of chip produce per time given metal removal rate

Go Number of Chip Produced per Unit Time = Material Removal Rate/Average Volume of Each Chip in Grinding

Infeed given Diameter of wheel and average length of chip

Go Infeed in Grinding Machine = (Average Chip Length^2)/Diameter of Grinding Tool Wheel

Infeed given Diameter of wheel and average length of chip Formula

Infeed in Grinding Machine = (Average Chip Length^2)/Diameter of Grinding Tool Wheel
f_in = (l_c^2)/d_t

How many types of grinding are there?

Grinding machines fall into five categories: surface grinders, cylindrical grinders, centerless grinders, internal grinders, and specials. Surface grinders are used to produce flat, angular, and irregular surfaces.

How to Calculate Infeed given Diameter of wheel and average length of chip?

Infeed given Diameter of wheel and average length of chip calculator uses Infeed in Grinding Machine = (Average Chip Length^2)/Diameter of Grinding Tool Wheel to calculate the Infeed in Grinding Machine, The Infeed given Diameter of wheel and average length of chip is the distance the cutting tool advances along the length of the work for every revolution of the spindle. Infeed in Grinding Machine is denoted by f_in symbol.

How to calculate Infeed given Diameter of wheel and average length of chip using this online calculator? To use this online calculator for Infeed given Diameter of wheel and average length of chip, enter Average Chip Length (l_c) & Diameter of Grinding Tool Wheel (d_t) and hit the calculate button. Here is how the Infeed given Diameter of wheel and average length of chip calculation can be explained with given input values -> 2098.117 = (0.020269^2)/0.19581.

FAQ

What is Infeed given Diameter of wheel and average length of chip?

The Infeed given Diameter of wheel and average length of chip is the distance the cutting tool advances along the length of the work for every revolution of the spindle and is represented as f_in = (l_c^2)/d_t or Infeed in Grinding Machine = (Average Chip Length^2)/Diameter of Grinding Tool Wheel. Average Chip Length is the undeformed chip length during grinding operation & The Diameter of Grinding Tool Wheel is the diameter of the wheel used for the grinding.

How to calculate Infeed given Diameter of wheel and average length of chip?

The Infeed given Diameter of wheel and average length of chip is the distance the cutting tool advances along the length of the work for every revolution of the spindle is calculated using Infeed in Grinding Machine = (Average Chip Length^2)/Diameter of Grinding Tool Wheel. To calculate Infeed given Diameter of wheel and average length of chip, you need Average Chip Length (l_c) & Diameter of Grinding Tool Wheel (d_t). With our tool, you need to enter the respective value for Average Chip Length & Diameter of Grinding Tool Wheel and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.

How many ways are there to calculate Infeed in Grinding Machine?

In this formula, Infeed in Grinding Machine uses Average Chip Length & Diameter of Grinding Tool Wheel. We can use 1 other way(s) to calculate the same, which is/are as follows -

Infeed in Grinding Machine = (1-cos(Angle made by the length of the chip))*Diameter of Grinding Tool Wheel/2

Home

FREE PDFs

🔍 Search