Credits

Shri Govindram Seksaria Institute of Technology and Science (SGSITS ), Indore
Saurabh Patil has created this Calculator and 700+ more calculators!
National Institute Of Technology (NIT), Hamirpur
Anshika Arya has verified this Calculator and 2600+ more calculators!

Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end Solution

STEP 0: Pre-Calculation Summary
Formula Used
Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin)
a = L/(2*(σc)*d)
This formula uses 3 Variables
Variables Used
Load on Knuckle Joint - Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts. (Measured in Newton)
Compressive Stress in Pin - Compressive Stress in Pin is the compressive stress induced into the pin, the force per unit area tending to cause deformation of the pin. (Measured in Newton per Square Millimeter)
Diameter of Knuckle Pin - Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint. (Measured in Millimeter)
STEP 1: Convert Input(s) to Base Unit
Load on Knuckle Joint: 50000 Newton --> 50000 Newton No Conversion Required
Compressive Stress in Pin: 30 Newton per Square Millimeter --> 30000000 Pascal (Check conversion here)
Diameter of Knuckle Pin: 38 Millimeter --> 0.038 Meter (Check conversion here)
STEP 2: Evaluate Formula
Substituting Input Values in Formula
a = L/(2*(σc)*d) --> 50000/(2*(30000000)*0.038)
Evaluating ... ...
a = 0.0219298245614035
STEP 3: Convert Result to Output's Unit
0.0219298245614035 Meter -->21.9298245614035 Millimeter (Check conversion here)
FINAL ANSWER
21.9298245614035 Millimeter <-- Thickess of Fork Eye of Knuckle Joint
(Calculation completed in 00.013 seconds)

10+ Design of Knuckle Joint Calculators

Compressive stress in pin inside fork of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(2*(Thickess of Fork Eye of Knuckle Joint)*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given load and shear stress in pin
Diameter of Knuckle Pin = sqrt((2*Load on Knuckle Joint)/(pi*(Shear Stress in Pin))) Go
Diameter of rod of knuckle joint given tensile stress in rod
Diameter of rod = sqrt((4*Load on Knuckle Joint)/(pi*(Tensile Stress In Rod))) Go
Compressive stress in pin inside eye of knuckle joint given load and pin dimensions
Compressive Stress in Pin = Load on Knuckle Joint/(Thickess of Eye of Knuckle Joint*Diameter of Knuckle Pin) Go
Diameter of pin of knuckle joint given compressive stress in eye end portion of pin
Diameter of Knuckle Pin = Load on Knuckle Joint/(Compressive Stress in Pin*Thickess of Eye of Knuckle Joint) Go
Length of pin of knuckle joint in contact with the eye end
Length of Pin in Eye End = Load on Knuckle Joint/(Compressive Stress in Pin*Diameter of Knuckle Pin) Go
Shear stress in pin of knuckle joint given load and pin diameter
Shear Stress in Pin = (2*Load on Knuckle Joint)/(pi*(Diameter of Knuckle Pin^2)) Go
Tensile stress in rod of knuckle joint
Tensile Stress In Rod = (4*Load on Knuckle Joint)/(pi*(Diameter of rod^2)) Go
Diameter of rod of knuckle joint given its enlarged diameter near the joint
Diameter of rod = Enlarged Diameter of Rod/1.1 Go
Enlarged Diameter of rod of knuckle joint near the joint
Enlarged Diameter of Rod = 1.1*Diameter of rod Go

Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end Formula

Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin)
a = L/(2*(σc)*d)

Applications of knuckle joint

1. Tie rod joint of a roof truss.
2. Tension link in bridge structure.
3. Link of roller chain.
4. Tie rod joint of jib crane.
5. The knuckle joint is also used in tractor.

How to Calculate Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end?

Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end calculator uses Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin) to calculate the Thickess of Fork Eye of Knuckle Joint, The Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis. Thickess of Fork Eye of Knuckle Joint is denoted by a symbol.

How to calculate Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end using this online calculator? To use this online calculator for Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end, enter Load on Knuckle Joint (L), Compressive Stress in Pin c) & Diameter of Knuckle Pin (d) and hit the calculate button. Here is how the Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end calculation can be explained with given input values -> 21.92982 = 50000/(2*(30000000)*0.038).

FAQ

What is Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end?
The Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis and is represented as a = L/(2*(σc)*d) or Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin). Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts, Compressive Stress in Pin is the compressive stress induced into the pin, the force per unit area tending to cause deformation of the pin & Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.
How to calculate Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end?
The Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end is the thickness of the eye of the fork part of a knuckle joint and is measured along the eye hole axis is calculated using Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*(Compressive Stress in Pin)*Diameter of Knuckle Pin). To calculate Thickness of each eye of fork of knuckle joint given compressive stress in pin inside fork end, you need Load on Knuckle Joint (L), Compressive Stress in Pin c) & Diameter of Knuckle Pin (d). With our tool, you need to enter the respective value for Load on Knuckle Joint, Compressive Stress in Pin & Diameter of Knuckle Pin and hit the calculate button. You can also select the units (if any) for Input(s) and the Output as well.
How many ways are there to calculate Thickess of Fork Eye of Knuckle Joint?
In this formula, Thickess of Fork Eye of Knuckle Joint uses Load on Knuckle Joint, Compressive Stress in Pin & Diameter of Knuckle Pin. We can use 5 other way(s) to calculate the same, which is/are as follows -
  • Thickess of Fork Eye of Knuckle Joint = 3*((2*Bending Moment in Knuckle Pin/Load on Knuckle Joint)-(Thickess of Eye of Knuckle Joint/4))
  • Thickess of Fork Eye of Knuckle Joint = 3*(((pi*(Diameter of Knuckle Pin^3)*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint))-(Thickess of Eye of Knuckle Joint/4))
  • Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Tensile Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Fork Eye of Knuckle Joint = Load on Knuckle Joint/(2*Shear Stress in Fork of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))
  • Thickess of Fork Eye of Knuckle Joint = 0.75*Diameter of rod
Share Image
Let Others Know
Facebook
Twitter
Reddit
LinkedIn
Email
WhatsApp
Copied!